Fast intra prediction algorithm based on texture analysis for 3D-HEVC encoders

The advances in display technologies and the growing popularity of 3D video systems have attracted more consumers for 3D viewing experiences, and, consequently, the demand for storage and transmission of 3D video content is increasing. To cope with this demand, a 3D video extension of high-efficiency video coding (HEVC) standard is being developed and near the final standardization stage. The upcoming 3D-HEVC standard is expected to provide higher encoding efficiency than its predecessors, supporting multiple views with high resolution, at a cost of considerable increase in computational complexity, which can be an obstacle to its use in real-time applications. This article proposes a novel complexity reduction algorithm developed to optimize the 3D-HEVC intra mode decision targeting real-time video processing for consumer devices with limited computational power, such as 3D camcorders and smartphones equipped with multiple cameras and depth acquisition capabilities. The proposed algorithm analyzes the texture frames and depth maps to estimate the orientation of edges present in the prediction unit data, speeding up the intra prediction process and reducing the 3D-HEVC encoding processing time. Experimental results demonstrate that the proposed algorithm can save 26 % in computational complexity on average with negligible loss of encoding efficiency. This solution contributes to make more feasible the compression of 3D videos targeting real-time applications in power-constrained devices.     

Synthesis of symmetric and asymmetric singly terminated elliptic ladder filters for multiplexing applications

An extension of the Cauer ladder development for synthesizing singly terminated filters with symmetric and asymmetric responses is presented. Basically, a driving‐point immittance including reactive constant elements is carried out in such a way that provides the transmission zeros. The reactive constant elements are introduced into the synthesis for two reasons. The first is to consider the possibility of the asymmetric position of transmission zeros in the real frequency axis. The second one is to obtain canonical forms, i.e. networks with the minimum number of elements in the case of symmetrical responses. To validate the proposed method, a filter with asymmetrical response has been synthesized, comparing different topologies for its use in multiplexers. This fact is illustrated with a Ku‐band elliptic response diplexer designed in H‐plane rectangular waveguide. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.     

Soft computing and cooperative strategies for optimization

In the last years, metaheuristics have emerged as powerful algorithmic approaches which have been applied with great success to difficult combinatorial optimization problems. However, this does not mean that metaheuristics can be applied blindly to any new problem.In this contribution we showed how the most basic ingredients of Soft Computing, namely fuzzy sets and fuzzy rules, are used in the context of a simple metaheuristic and a cooperative strategy based on it, to obtain successful results for the p-median problem.     

Analysis of the inappropriate utilization of the emergency service of a third-level hospital

OBJECTIVE: a) To find the reasons for inadequate use of Hospital Casualty Departments (HCDs); b) to discover the general population's levels of information concerning non-hospital Emergency Services (NESs); c) to analyse the relationship between the type of Primary Care Centre (PCC), i.e. whether reformed or not, and inadequate use of HCDs. DESIGN: A crossover study. SETTING: The Germans Trias i Pujol Hospital Casualty Department, Badalona. PATIENTS: A random sample of 321 patients over 14 years old, who were attended for pathologies considered emergencies not requiring hospital treatment. MEASUREMENTS AND MAIN RESULTS: The variables gathered were: age, gender, where the patient came from, reason for hospital use, knowledge of NESs and subsequent referral. 83.2% of patients attended on their own initiative. The main reasons given were "advantages of a hospital" and "the persistence of symptoms." 49% of the patients stated they knew of the NESs. 80% of the patients proceeded from PCCs which had not been reformed. There were no statistically significant differences (p > 0.05) when the variables "reason for use" and "knowledge of NESs" were compared in relation to where the patient came from (i.e. reformed or non-reformed PCC). CONCLUSIONS: General practitioners in reformed PCCs are less likely to refer to HCDs. Knowledge and use of NESs should be actively supported.     

Comparing the Slack-Variable Mixture Model With Other Alternatives

There have been many linear regression models proposed to analyze mixture experiments including the Scheffé model, the slack-variable model, and the Kronecker model. The use of the slack-variable model is somewhat controversial within the mixture experiment research community. However, in situations that the slack-variable ingredient is used to fill in the formulation and the remaining ingredients have constraints such that they can be chosen independently of one another, the slack-variable model is extremely popular by practitioners mainly due to the ease of interpretation. In this article, we advocate that for some mixture experiments the slack-variable model has appealing properties including numerical stability and better prediction accuracy when model-term selection is performed. We also explain how the effects of the slack-variable model components should be interpreted and how easy it is for practitioners to understand the components effects. We also investigate how to choose the slack-variable component, what transformation should be used to reduce collinearity, and under what circumstances the slack-variable model should be preferred. Both simulation and practical examples are provided to support the conclusions.     

Dynamic fatigue behaviour of a steatite ceramic

Dynamic fatigue of a low dielectric loss steatite was investigated. To this end, the values of n and B, the so‐called subcritical crack growth (SCG) parameters were experimentally determined. The steatite exhibited the expected dynamic fatigue behaviour, so that the stress corrosion susceptibility parameter, n, of 24 was obtained. In addition, the material/environment parameter B, which is a constant for a given test environment, was also attained. These parameters are instrumental in predicting the lifetime of components under stress. When the applied load is such that the resulting strength equals half of the inert strength (σ_i), defined as the strength of a sample tested in an inert environment or at a fast stress rate, i.e. where no subcritical crack growth occurs, the time to failure (t_f) of the material was found to be ～140 h. Measurement of the fracture toughness of steatite is also of upmost importance and so it was determined using three test methods. A value of K_Ic = 1.91 ± 0.29 MPa m^1/2 was attained by the indentation fracture method through measurement of the cracks emanating from the Vickers indentation. This value is in good agreement with those determined using the K_Isc (surface crack in flexure) test method (2.21 ± 0.07 MPa m^1/2) and fractography analysis test method (2.00 ± 0.44 MPa m^1/2). Differences in test procedure and analysis causing the values from each test method to be different are discussed.     

Comparison of three-dimensional surface scanning techniques for capturing the external ear

Congenital facial anomalies, such as microtia (malformation of the external ear), lead to significant psychosocial effects starting from early childhood. Three-dimensional (3D) scanning and advanced manufacturing are being investigated as a cheaper and more personalised method of fabricating reconstructive treatments for patients compared to traditional approaches. To date, most case studies have used expensive 3D scanners, yet, there is potential for low-cost devices to provide comparable results. This study aimed to investigate these different approaches. Both ears of 16 adult participants were scanned with three devices: Artec Spider (Artec Group), Intel^® RealSense? (Intel), and the Apple iPhone^® 7 (Apple Inc.) combined with photogrammetry using 90, 60 and 30 photographs. The scanning time, processing time, accuracy, completeness, resolution and repeatability of each technique were assessed using the Artec Spider as a reference scanner. Our results show that the iPhone had the longest processing time however, this decreased nine-fold when reducing the number of photos from 90 to 30. There was no significant difference in the accuracy, completeness or repeatability of the iPhone scans with 90 photographs (1.4?±?0.6?mm, 79.9%, 1.0?±?0.1?mm), 60 photographs (1.2?±?0.2, 79.3%, 0.9?±?0.2?mm) or 30 photographs (1.2?±?0.3?mm, 74.3%, 1.0?±?0.2?mm). The Intel RealSesne performed significantly worse in each parameter (1.8?±?03?mm; 46.6%, 1.4?±?0.5). Additionally, the RealSense had significantly lower resolution with not enough detail captured for the application. These results demonstrate that the ear can be accurately 3D scanned using iPhone photographs. We would recommend capturing between 30 and 60 photographs of the ear to create a scan that is accurate but without the downfall of long processing time. Using these methods we aim to provide a more comfortable setting for the patient and a lower-cost and more personalised ear prosthesis.     

Solving identity delegation problem in the e-government environment

At present, many countries allow citizens or entities to interact with the government outside the telematic environment through a legal representative who is granted powers of representation. However, if the interaction takes place through the Internet, only primitive mechanisms of representation are available, and these are mainly based on non-dynamic offline processes that do not enable quick and easy identity delegation. This paper proposes a system of dynamic delegation of identity between two generic entities that can solve the problem of delegated access to the telematic services provided by public authorities. The solution herein is based on the generation of a delegation token created from a proxy certificate that allows the delegating entity to delegate identity to another on the basis of a subset of its attributes as delegator, while also establishing in the delegation token itself restrictions on the services accessible to the delegated entity and the validity period of delegation. Further, the paper presents the mechanisms needed to either revoke a delegation token or to check whether a delegation token has been revoked. Implications for theory and practice and suggestions for future research are discussed.     

Combining Support Vector Machines and simulated annealing for stereovision matching with fish eye lenses in forest environments

We present a novel strategy for computing disparity maps from omni-directional stereo images obtained with fish-eye lenses in forest environments. At a first segmentation stage, the method identifies textures of interest to be either matched or discarded. Two of them are identified by applying the powerful Support Vector Machines approach. At a second stage, a stereovision matching process is designed based on the application of four stereovision matching constraints: epipolarity, similarity, uniqueness and smoothness. The epipolarity guides the process. The similarity and uniqueness are mapped once again through the Support Vector Machines, but under a different way to the previous case; after this an initial disparity map is obtained. This map is later filtered by applying the Discrete Simulated Annealing framework where the smoothness constraint is conveniently mapped. The combination of the segmentation and stereovision matching approaches makes the main contribution. The method is compared against the usage of simple features and combined similarity matching strategies.