Microstructure characterization of CVI-densified carbon/carbon composites with various fiber distributions

Mechanical behavior of multi-phase composites is crucially influenced by volume fractions, orientation distributions and geometries of microconstituents. In the case of carbon–carbon composites manufactured by chemical vapor infiltration, the microconstituents are carbon fibers, pyrolytic carbon matrix, and pores. The local variable thickness of the pyrolytic carbon coating, distribution of the fibers and porosity are the main factors influencing the properties of these materials. Two types of fiber arrangements are considered in this paper: 2D laminated preform and random felt. The materials are characterized by determining their densities and their fiber distribution functions, by establishing types of pyrolytic carbon matrix present in the composites, and by studying the porosity. A technique utilizing X-ray computed tomography for estimation of the orientation distribution of the fibers and pores with arbitrary shapes is developed. A methodology based on the processing of microstructure images with subsequent numerical simulation of the coating growth around the fibers is proposed for estimation of the local thickness of the coating. The obtained information is appropriate for micromechanical modeling and prediction of the overall thermo-mechanical properties of the studied composites.     

Effect of carrier screening on ZnO-based resistive switching memory devices

The carrier screening effect occurs commonly in dielectric materials. It reduces the electric potential gradient, thus negatively affecting the functionality of resistive random access memory (RRAM) devices. An Au/ZnO film/Al-doped ZnO device fabricated in this work exhibited no resistive switching (RS), which was attributed to the carrier screening effect. Therefore, annealing was used for alleviating the screening effect, significantly enhancing the RS property. In addition, different on/off ratios were obtained for various bias values, and the screening effect was accounted for by investigating electron transport mechanisms. Furthermore, different annealing temperatures were employed to modulate the free carrier concentration in ZnO films to alleviate the screening effect. The maximal on/off ratio reached 10⁵ at an annealing temperature of 600 °C, yielding the lowest number of free carriers and the weakest screening effect in ZnO films. This work investigates the screening effect in RS devices. The screening effect not only modulates the characteristics of memory devices but also provides insight into the mechanism of RS in these devices.

Open image in new window

     

Structural,magnetic and photocatalytic characterization of Bi<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>La<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> nanoparticles synthesized by thermal decomposition method

Single-phase La-substituted bismuth ferrite (Bi\(_{\boldsymbol {1-x}}\)La\(_{\boldsymbol {x}}\)FeO\(_{\mathbf {3}}\)) nanoparticles have been synthesized by thermal decomposition of a glyoxylate precursor. The crystal structure transition of BiFeO\(_{\mathbf {3}}\) from the rhombohedral (R3c) to the cubic \(\boldsymbol {Pm}\bar {\mathbf {3}}\boldsymbol {m}\) structure by La addition was confirmed by X-ray diffraction and infrared spectrometry methods. Furthermore, the Bi\(_{\boldsymbol {1-x}}\)La\(_{\boldsymbol {x}}\)FeO\(_{\mathbf {3}}\) nanoparticles showed a weak ferrimagnetism behaviour, while the magnetization increased from 0.18 to 0.48 emu g\(^{\mathbf {-1}}\) with La substitution. The Bi\(_{\boldsymbol {1-x}}\)La\(_{\boldsymbol {x}}\)FeO\(_{\mathbf {3}}\) nanoparticles exhibited strong absorption in the visible region with the optical band gap calculated from Tauc’s plot in the range of 2.19–2.15 eV. Furthermore, the effects of La substitution on the photodegradation of the methylene blue (MB) under visible light were also studied. The photodegradation of MB dye was enhanced from 64 to \(\sim \)99% with increasing La substitution from \(\boldsymbol {x =}\) 0 to 0.1 and then decreased to 8% for \(\boldsymbol {x =}\) 0.15.     

Poly (vinyl alcohol) hydrogels for pH dependent colon targeted drug delivery

Oral drug administration is convenient with pH dependent drug delivery system since the drug has to pass through different pH environments in gastro intestinal (GI) tract. The pH dependent swelling/shrinking behavior of hydrogel drug carrier controls the drug release without affecting the function of drug. pH dependent hydrogels of poly (vinyl alcohol) (PVA) were prepared by cross linking with maleic acid (MA). The hydrogels were characterized by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, DSC, porosimetry, SEM, TEM, biocompatibility study and by measuring their swelling behavior in water, simulated gastric fluid (SGF) and intestinal fluid (SIF). Swelling of the hydrogels was found to be highest in SIF (pH: 7.5) and lowest in SGF (pH: 1.2) resembling that required in colon targeted drug delivery systems. Since the swelling behavior of the gel is pH dependent, these hydrogels were studied for colon targeted drug delivery in an in-vitro set-up resembling the condition of GI tract. The ratio of PVA and MA in the hydrogel was varied to study the effect on the drug diffusion rate. For drug delivery study, vitamin B₁₂ and salicylic acid were used as model drugs. The hydrogel, loaded with model drugs vitamin B₁₂ and salicylic acid also demonstrated colon specific drug release with a relatively higher drug release in SIF (pH: 7.5) than that in SGF (pH: 1.2).     

Direct sampling of chemical weapons in water by photoionization mass spectrometry

The vulnerability of water supplies to toxic contamination calls for fast and effective means for screening water samples for multiple threats. We describe the use of photoionization (PI) mass spectrometry (MS) for high-speed, high-throughput screening and molecular identification of chemical weapons (CW) threats and other hazardous compounds. The screening technology can detect a wide range of compounds at subacute concentrations with no sample preparation and a sampling cycle time of approximately 45 s. The technology was tested with CW agents VX, GA, GB, GD, GF, HD, HN1, and HN3, in addition to riot agents and precursors. All are sensitively detected and give simple PI mass spectra dominated by the parent ion. The target application of the PI MS method is as a routine, real-time early warning system for CW agents and other hazardous compounds in air and in water. In this work, we also present comprehensive measurements for water analysis and report on the system detection limits, linearity, quantitation accuracy, and false positive (FP) and false negative rates for concentrations at subacute levels. The latter data are presented in the form of receiver operating characteristic curves of the form of detection probability P(D) versus FP probability P(FP). These measurements were made using the CW surrogate compounds, DMMP, DEMP, DEEP, and DIMP. Method detection limits (3sigma) obtained using a capillary injection method yielded 1, 6, 3, and 2 ng/mL, respectively. These results were obtained using 1-microL injections of water samples without any preparation, corresponding to mass detection limits of 1, 6, 3, and 2 pg, respectively. The linear range was about 3-4 decades and the dynamic range about 4-5 decades. The relative standard deviations were generally <10% at CW subacute concentrations levels.     

Synthesis and thermal analysis of aluminium nitride filled epoxy composites and its effective application as thermal interface material for LED applications

The improvement of heat conduction in any electronic devices has become a predominant issue in which effective heat dissipation is crucial to enhance the performance of packaged devices. This paper elucidates the application of thermally conductive particles filled composites as thermal interface material for LEDs. Present work aims on reducing the junction temperature and thermal resistance of the device under test with heavily filled ceramic-epoxy composite as the interface material between the device and metal substrate. Silane treated aluminium nitride (AlN) powder was studied for its feasibility as the filler material. The thermal conductivity values obtained by hot disc method (ISO/DIS 22007-2.2) were 0.66, 0.54 and 0.44 W/mK for 60, 50 and 40 wt% AlN filled epoxy composites respectively which were described well by thermal transient measurement of LEDs. The junction temperature and total thermal resistance of the thermal set up was reduced significantly with increased filler loading. The least junction to ambient thermal resistance (R_thJ-A) was achieved for 60 wt% followed by 50 and 40 wt% AlN filled TIM with the values of 24.8, 31.98 and 34.64 K/W respectively. Characteristics of the AlN filled composites for LED applications are discussed extensively in terms of thermogravimetric and thermo-mechanical analysis.     

Quantitative Analysis of the Degradation Behavior of Silicon Solar Cell Irradiated by 1 MeV Electron Beams Using Photocarrier Radiometry Combined with Lock-in Carrierography

Silicon solar cells with cover glass irradiated by 1 MeV electron beams at various fluences were investigated using photocarrier radiometry (PCR) combined with lock-in carrierography (LIC, spectrally gated dynamic photoluminescence). The minority carrier transport properties (i.e., minority carrier lifetime τ, diffusion coefficient D, surface recombination velocities S) and the degradation of these properties were studied using PCR. The relative damage coefficient obtained by LIC was consistent with the PCR measurement. The local series resistance of the solar cell before and after irradiation was characterized by LIC. The results showed that the series resistance increased with electron fluences.     

Evaluation of Fatigue Crack Orientation Using Non-collinear Shear Wave Mixing Method

In this paper, a non-collinear shear wave mixing technique is proposed for evaluation of fatigue crack orientation. Numerical analysis of the nonlinear interaction of two shear waves with crack is performed using two-dimensional finite-element simulations. The simulation results show that the nonlinear interaction of the two shears waves with cracks leads to the generation of transmitted and reflected sum-frequency longitudinal waves (SFLW), moreover the propagation direction of reflected SFLW is correlated with the orientation of crack, which can be used for crack orientation evaluation. Non-collinear wave-mixing experiments were conducted on specimens with fatigue crack. The experimental results show that the directivity of the generated SFLW agrees well with the simulation results, and non-collinear shear wave mixing has potential use in fatigue crack orientation evaluation.     

The Influence of the Annealing Regime on the Properties of Terahertz Antennas Based on Low-Temperature-Grown Gallium Arsenide

Low-temperature gallium arsenide (LT-GaAs) films were grown by the method of molecularbeam epitaxy (MBE) at a reduced temperature (230°C) on GaAs(100) substrates and subjected to postgrowth annealing in various regimes. Photoconductive antennas (PCAs) with flag geometry formed on the film surface were characterized by terahertz (THz) response power at various bias voltages. The method of THz spectroscopy was used to study the characteristics of PCAs based on LT-GaAs films annealed in various regimes and the optimum interval of postgrowth annealing temperatures (670–720°C) was established.     

Chemical and Physiological Properties of Glucose Syrup Components

Although glucose syrups are in wide commercial use their constitution is extremely complex and hence the physiological effects of individual components relative to their chemical structures have not been explored. Although the major components of glucose syrups are 1–4 glucosidically linked maltodextrins which may be expected to undergo normal metabolic breakdown, in whole glucose syrups fed to mammals, it is conceivable that differences could occur when glucose syrups are fractionated for different technological purposes. This paper describes experiments on the fractionation of commercial glucose syrups by two different methods and some physiological effects which are observed when these fractions are fed to both male and female rats. Although these are preliminary experiments in this field they do suggest a sex difference in the metabolism of dietary carbohydrates which accords with earlier work in humans and baboons. All rats used in these experiments were young and grew normally. Their external appearance was healthier than that of rats on a normal 41B diet.