Experimental densities for compressed R134a

This paper reports densities of compressed R134a (1,1,1,2-tetrafluoroethane) determined by using a contiuously weighed pycnometer at 20 K intervals between 180 and 380 K at pressures from slightly greater than the vapour pressure to 70 MPa. The results are accurate to within ±0.1%. Saturated liquid densities derived by extrapolation from the experimental values agree with other reported values to within ±0.3%.     

A refined statistical approach to thermal fatigue life prediction

Finding new applications for ceramic materials requires a better knowledge of thermal fatigue behaviour. However, result-scattering inherent to thermal fatigue and duration of a thermal fatigue cycle lead to a lack of experimental results. For these reasons, we have developed a new approach that permits the determination of a relevant stress intensity factor exponent n with a minimum testing sample number. From knowledge of the distribution function of artificial cracks, the analytical formula of the failure probability F(N) can be completely determined. Thus, it is possible to calculate n from a correlation of F(N) with experimental results obtained for only one temperature difference. Correlations between theoretical curves F(N) and experimental results, conducted for two temperature differences, lead to the same value of n. This and the good agreement between the experimental points and the theoretical curves validate this new approach.     

Performance characteristics of a composite multivariate quality control system.

We present the results of an evaluation of the performance characteristics of a composite multivariate quality control (CMQC) system that incorporates quality control rules for univariate, multivariate, and correlation conditions. The CMQC system evaluated is designed to help analysts detect unacceptable trends and systematic error in one or more variables, unacceptable random error in one or more variables, and unacceptable changes in the correlation structure of any pair of variables. It is also designed to be tolerant of missing data, to allow analysts to reject as few as one or as many as all variables in a run, and to provide analysts with control statistics and graphics that logically relate to sources of analytical error. We show that the various components of the CMQC system have adequate statistical power to detect systematic errors, random errors, and correlation changes under the conditions likely to be encountered with multivariate analytical measurement systems: (1) a single variable with increased systematic or random error; (2) all variables or a subgroup of variables affected by a common problem that increases systematic or random error; and (3) missing data for one or more variables in a run. We also show that the power of the multivariate component of the CMQC system to detect systematic and random errors is higher than the power of an alternative multivariate test criterion.     

Comparative study of lipid systems from various sources by rotational viscometry and potentiometry

We carried out the analysis of lecithins with a common polar group and paraffin chains of different lengths and degree of saturation at two levels, namely: (a) that of the paraffin chain proper, by studying whether structural defects arising from the different mobility of the lipid chains affected their rheological properties; and (b) that of the polar group, which is known to be affected by perturbations to the paraffin chain, and so should its ionization.     

The use of probability theory in fracture mechanics—A case study

A probabilistic approach to fracture mechanics in the form of a typical case study is described wherein the integrity of a high-pressure water pipeline is assessed. An analysis methodology is discussed incorporating the probability density functions of defect sizes, the statistics of defect occurrences and the statistical distribution of material properties. This method enables the analyst to supply a very simple assessment of safety, based on the probability of failure (a single number) which may be compared to accepted industrial standards (e.g. 10⁻⁶ for nuclear applications). It is argued that this method often offers the only way to scientifically and economically assess the integrity of fracture prone structures.     

Depth of intergranular oxygen diffusion during environment-dependent fatigue crack growth in alloy 718

The elevated-temperture fatigue crack growth behavior in alloy 718, when subjected to a loading frequency lower than the transitional frequency of this alloy, is viewed as fully environment dependent. In this process, the crack growth increment per loading cycle is assumed to be equal to the intergranular oxygen diffusion depth at the crack tip during the cycle effective oxidation time. In order to identify the trend of this diffusion depth an experimental program was carried out on compact tension specimens made of alloy 718 at 650 °C in which fatigue crack growth measurements were made for cyclic load conditions with and without hold time periods at minimum load level. This work resulted in establishing a relationship correlating the intergranular oxygen diffusion depth and the value of the stress intensity factor range ΔK. This relationship, when integrated over the cycle effective oxidation time, results in a closed-form solution describing the environment-dependent fatigue crack growth rate. A comparison is made between the results of this solution when applied to different loading frequencies and the corresponding experimental results. This comparison shows good agreement between the two sets of results. Furthermore, by combining the parabolic rate law of diffusion and the equation for the intergranular oxygen diffusion depth, an explicit expression for the oxygen diffusivity of grain boundaries is derived. It is found that this diffusivity is both a ΔK- and a frequency-dependent parameter.     

Analysis of a resonant-cavity enhanced GaAs/AlGaAs MSMphotodetector

The authors have developed a 2-D device simulator for heterostructure metal-semiconductor-metal (MSM) photodetectors. They have incorporated a model of multilayer optics into the simulator and used it to analyze the temporal response of a resonant-cavity enhanced heterostructure with a confining buffer layer and a distributed Bragg reflector (DBR). The authors show that through fine tuning the layer thicknesses, optical resonance enhancement of the light absorption can be obtained     

Stabilization of high-impact polystyrene/ polyethylene blends

Commercial poly(styrene-b-butadiene) copolymers (SBS) can act as effective compatibilizers in blends between high-impact polystyrene (HIPS) and polyethylene (PE), allowing a fine dispersion of PE in the polystyrene matrix, with a good balance of stiffness and impact strength. However, when processed under more severe conditions (e.g. in multiple extrusions, which simulate customer's product scrap recovery), the above blends show rather poor stability and their useful properties are rapidly lost. That undesirable effect is mainly due to cross-linking of SBS, which thus looses its compatibilizing activity. A correlation has been found between the time-to-cross-linking of SBS rubber in a Brabender mixer and the rapid decay of mechanical properties. The analysis of the mixing process and the morphology examinations of the final blend sample by TEM seem to support the above hypothesis. A significant reduction of block copolymer degradation has been achieved by means of a suitable stabilization.     

D.c. conduction studies on thermally evaporated neodymium oxide thin films

Aluminium-neodymium oxide-aluminium thin film capacitors have been prepared by thermal evaporation and the d.c. conduction properties of these films have been studied. The thicknesses of the films have been determined by a multiple beam interferometer. The current-voltage power-law dependence showed that the conduction in these films is space-charge limited. The linear dependence of the current density on the square root of the applied field confirmed the exponential trap distribution. The trap density has been found to be of the order of 10²⁶ m^–3. It has also been observed that the Schottky type of conduction is predominant in the high-field region and the height of the Schottky barrier has been determined. It is seen that the conduction mechanism is an activated process with the activation energy decreasing with increasing field.     

Planning for CAD systems

A basic problem in buying a CAD system arises from the fact that, if you do not know where you are going, any road will take you there. The solution is to plan where you want to go, and the rest more-or-less follows. The author shows how there are several ways in which you can acquire the expertise so that you can define your destination (i.e. your total CAD requirement) and hence plan your route (the justification and selection of the system)