Enhancing echo cancellation via estimation of delay

The advent of packetized audio transmission, such as voice over IP (VoIP), has resulted in challenging requirements for echo cancellation technology. One key aspect of this technology is the need to characterize, quickly and accurately, the echo paths in the transmission media. Echo paths consist of a constant time delay with no echo signal and active regions in which the echo signal is present. When an adaptive filter echo cancellation algorithm is used, its performance can be greatly increased, and its complexity can be reduced if it is only applied to the active regions. This requires an algorithm to estimate the constant delay and locate the active regions. Traditionally, delay estimation has been based on direct application of cross-correlation. This method has poor performance because the input signals are highly correlated and has a high implementation cost because many cross-correlation lags have to be computed for longer time delays. The delay estimation addressed in this paper has two major advantages over the traditional methods. The first is that it has improved performance because the input signals are processed to have less correlation. The second is that the implementation cost is significantly reduced because fewer cross-correlation lags are computed, and an efficient method to estimate lags is created.     

Strategies to improve the performance of very low bit rate speech coders and application to a variable rate 1.2 kb/s codec

This paper presents several strategies to improve the performance of very low bit rate speech coders and describes a speech codec that incorporates these strategies and operates at an average bit rate of 1.2 kb/s. The encoding algorithm is based on several improvements in a mixed multiband excitation (MMBE) linear predictive coding (LPC) structure. A switched-predictive vector quantiser technique that outperforms previously reported schemes is adopted to encode the LSF parameters. Spectral and sound specific low rate models are used in order to achieve high quality speech at low rates. An MMBE approach with three sub-bands is employed to encode voiced frames, while fricatives and stops modelling and synthesis techniques are used for unvoiced frames. This strategy is shown to provide good quality synthesised speech, at a bit rate of only 0.4 kb/s for unvoiced frames. To reduce coding noise and improve decoded speech, spectral envelope restoration combined with noise reduction (SERNR) postfilter is used. The contributions of the techniques described in this paper are separately assessed and then combined in the design of a low bit rate codec that is evaluated against the North American Mixed Excitation Linear Prediction (MELP) coder. The performance assessment is carried out in terms of the spectral distortion of LSF quantisation, mean opinion score (MOS), A/B comparison tests and the ITU-T P.862 perceptual evaluation of speech quality (PESQ) standard. Assessment results show that the improved methods for LSF quantisation, sound specific modelling and synthesis and the new postfiltering approach can significantly outperform previously reported techniques. Further results also indicate that a system combining the proposed improvements and operating at 1.2 kb/s, is comparable (slightly outperforming) a MELP coder operating at 2.4 kb/s. For tandem connection situations, the proposed system is clearly superior to the MELP coder.     

Equal gain combining over Nakagami-n (rice) and Nakagami-q (Hoyt) generalized fading channels

Motivated by the importance of Nakagami-n (Rice) and Nakagami-q (Hoyt) statistical models to describe channel fading in land, mobile, terrestrial, and satellite telecommunications, we present an alternative moments-based approach to the performance analysis of equal-gain combining (EGC) receivers over independent, not necessarily identically distributed Rice- and Hoyt-fading channels. Exact closed-form expressions for the moments of the signal-to-noise ratio (SNR) at the output of the combiner are derived and significant performance criteria such as, the average output SNR, the amount of fading and the spectral efficiency at the low power regime, are studied. Moreover, using Pade rational approximation to the moment-generating function of the output SNR, the average symbol error probability and the outage probability are evaluated. We also study the suitability of modeling a Hoyt-fading environment by a properly chosen Nakagami-m model, as far as the error performance of the EGC is concerned.     

Towards real-time business intelligence

Analysing data to predict market trends of products and services and to improve performances of enterprise business systems has always been part of running a competitive business. But it is becoming essential nowadays that not only is the analysis done on real-time data, but also actions in response to analysis results can be performed in real time and instantaneously change parameters of business processes. This paper discusses issues and problems of current business intelligence systems, and then outlines our vision of future real-time business intelligence. We present a list of emerging technologies which could contribute to the realisation of real-time business intelligence and some examples of applying them to improve BT’s systems and services.     

Security issues in hybrid networks with a satellite component

Satellites are expected to play an increasingly important role in providing broadband Internet services over long distances in an efficient manner. Most future networks will be hybrid in nature - having terrestrial nodes interconnected by satellite links. Security is an important concern in such networks, since the satellite segment is susceptible to a host of attacks, including eavesdropping, session hijacking and data corruption. In this article we address the issue of securing communication in satellite networks. We discuss various security attacks that are possible in hybrid satellite networks, and survey the different solutions proposed to secure data communications in these networks. We look at the performance problems arising in hybrid networks due to security additions like Internet security protocol (IPSec) or secure socket layer (SSL), and suggest solutions to performance-related problems. We also point out important drawbacks in the proposed solutions, and suggest a hierarchical key-management approach for adding data security to group communication in hybrid networks.     

Tile-boundary artifact reduction using odd tile size and the low-pass first convention.

It is well known that tile-boundary artifacts occur in wavelet-based lossy image coding. However, until now, their cause has not been understood well. In this paper, we show that boundary artifacts are an inescapable consequence of the usual methods used to choose tile size and the type of symmetric extension employed in a wavelet-based image decomposition system. This paper presents a novel method for reducing these tile-boundary artifacts. The method employs odd tile sizes (2N + 1 samples) rather than the conventional even tile sizes (2N samples). It is shown that, for the same bit rate, an image compressed using an odd tile length low-pass first (OTLPF) convention has significantly less boundary artifacts than an image compressed using even tile sizes. The OTLPF convention can also be incorporated into the JPEG 2000 image compression algorithm using extensions defined in Part 2 of this standard.     

Stable scheduling policies for fading wireless channels

We study the problem of stable scheduling for a class of wireless networks. The goal is to stabilize the queues holding information to be transmitted over a fading channel. Few assumptions are made on the arrival process statistics other than the assumption that their mean values lie within the capacity region and that they satisfy a version of the law of large numbers. We prove that, for any mean arrival rate that lies in the capacity region, the queues will be stable under our policy. Moreover, we show that it is easy to incorporate imperfect queue length information and other approximations that can simplify the implementation of our policy.     

The effect of laser radiation on the formation of oriented cadmium sulfide layers under highly nonequilibrium conditions

The effect of low-power laser radiation on the formation of oriented cadmium sulfide layers from a vapor phase on a substrate cooled with liquid nitrogen (highly nonequilibrium conditions) is studied. The results of technological experiments, the results of a study of electron diffraction (electron diffraction patterns), and condensation diagram data are reported. It is found that, depending on the substrate temperature, laser radiation can both improve and worsen the crystal quality of films. It is shown that a condensation diagram of cadmium sulfide layers formed on a substrate exposed to low-power laser radiation is shifted to higher temperatures relative to a condensation diagram obtained without laser radiation. The experimental results are interpreted in the context of a solitonic heteroepitaxy model.     

Definition of efficient PAPR in OFDM

A high PAPR is a main drawback of OFDM. There are many methods for reducing the PAPR with an ultimate goal of reducing the PAPR as much as possible. It is shown that if, among other factors, the power efficiency-PAPR relationship of the power amplifier is also taken into account, then there exists a PAPR level for which the BER reaches a minimal value. This PAPR may be used as a definition of an efficient PAPR. The efficient PAPR is not necessary the lowest possible value of PAPR.     

Optical characteristics of waste stabilization ponds: recommendations for monitoring.

The optical character of waste stabilization ponds (WSPs) is of concern for several reasons. Algal photosynthesis, which produces oxygen for waste oxidation in WSPs, is influenced by attenuation of sunlight in ponds. Disinfection in WSPs is influenced by optical characteristics because solar UV exposure usually dominates inactivation. The optical nature of WSPs effluent also affects assimilation by receiving waters. Despite the importance of light behaviour in WSPs, few studies have been made of their optical characteristics. We discuss simple optical measures suitable for routine monitoring of WSPs (including at sites remote from laboratories): optical density of filtrates - an index of dissolved coloured organic (humic) matter, visual clarity - to provide an estimate of the beam attenuation coefficient (a fundamental quantity needed for optical modelling) colour (hue) - as an indicator of general WSP 'condition' and irradiance attenuation quantifying depth of light penetration. The value of optical characterisation of WSPs is illustrated with reference to optical data for WSPs in NZ (including high-rate algal ponds) treating dairy cattle wastewater versus domestic sewage. We encourage increased research on optical characteristics of WSPs and the incorporation of optical measures in monitoring and modelling of WSP performance.