Preweaning growth traits for Senepol, Hereford, and reciprocal crossbred calves and feedlot performance and carcass characteristics of steers

We conducted a multiyear study in two phases to determine preweaning performance traits of Senepol (S x S), Hereford (H x H), and reciprocal (S x H and H x S) F1 crossbred calves and feedlot performance and carcass characteristics of steers. In Phase I, from 1985 to 1989, data from S x S (n = 194), H x H (n = 383), and S x H (n = 120) calves were used. Numbers of S x S cows were increased during Phase I so that data from H x S (n = 74) calves could be included in Phase II (1990 to 1992) in addition to S x S (n = 118), H x H (n = 130), and S x H (n = 56) calves. Also during Phase II, feedlot performance and carcass characteristics were determined for S x S (n = 30), H x H (n = 26), H x S (n = 36), and S x H (n = 26) steers. In Phase I, S x S calves had heavier (P < .01) birth weights and heavier (P < .01) 205-d adjusted weaning weights than H x H calves. Birth weights of S x H calves were heavier (P < .01) than the mean of the purebred calves, but 205-d adjusted weaning weights did not differ (P > .10). In phase II, direct heterosis was 3.5% for birth weight (P < .05) and 5.1% for 205-d adjusted weaning weight (P < .01). Senepol maternal breed effects were 1.9 kg for birth weight (P < .10) and 37.9 kg for 205-d adjusted weaning weight (P < .01). Levels of direct heterosis, Senepol maternal breed effects, and Hereford direct breed effects were significant for most feedlot performance traits of steer calves that were fed to a common end point. Breeds did not differ (P > .10) for USDA yield and quality grades, and direct heterosis was not significant for Warner-Bratzler shear force. These results demonstrate significant levels of heterosis in preweaning performance between S x S and H x H calves and in feedlot performance of steers. Levels of heterosis were smaller and nonsignificant for most carcass traits including meat tenderness, which did not differ between S x S and H x H steers in this study.     

Charnley total hip arthroplasty in patients less than fifty years old. A twenty to twenty-five-year follow-up note

We evaluated the results twenty to twenty-five years after ninety-three consecutive, nonselected Charnley total hip arthroplasties performed with cement by the senior one of us in sixty-nine patients who were less than fifty years old at the time of the procedure. Seventy of the seventy-two hips in the living patients were followed radiographically for at least twenty years. Twenty-seven hips (29 per cent) had a revision or a resection of the prosthesis during the follow-up period. The revision or the resection was performed because of aseptic loosening in twenty-one hips (23 per cent), infection in four (4 per cent), dislocation in one (1 per cent), and fracture of the femur in one. Eighteen acetabular components (19 per cent) and five femoral components (5 per cent) were revised because of aseptic loosening, and an additional fourteen acetabular components (15 per cent) and seven femoral components (8 per cent) demonstrated definite or probable radiographic loosening. The present study demonstrates the long-term durability of total hip arthroplasty performed with cement in an active population of patients. The fixation of the femoral component was found to perform better than that of the acetabular component at twenty to twenty-five years after the procedure.     

Medullary thyroid carcinoma: genetic advances, treatment recommendations, and the approach to the patient with persistent hypercalcitoninemia

Medullary thyroid cancer is a tumor of the thyroid C cells that occurs in sporadic and hereditary clinical settings. Genetic testing of at-risk individuals is available and has been applied to patient management. Plasma calcitonin levels are a sensitive marker for the presence of disease. Surgery offers the best hope for cure and also is an effective modality for managing metastatic and recurrent disease.     

Observation of higher order NMR larmor lines by SQUID in solids at low magnetic field

We describe an apparatus allowing the observation of the NMR static longitudinal component of nuclear magnetizationM _z by a SQUID at low magnetic fields and atT=4.2 K in Plexiglas, Teflon, and CaF₂. The higher order NMR Larmor lines at 2f ₀, 3f ₀, and 4f ₀, wheref ₀ is the Larmor frequency of the allowed NMR line, were measured. These lines correspond to a flip of two, three, and four spins, respectively, by one photon. The amplitudes of 2f ₀ and 3f ₀ lines and their field dependences show that the common assertion that the forbidden lines at 2f ₀ and 3f ₀ appear in the same order of perturbation theory and that their intensity decreases with static magnetic fieldB ₀ asB ₀ ^–2 is wrong. In fact, the third Larmor line 3f ₀ appears at higher order than the second Larmor line 2f ₀ and its intensity decreases asB ₀ ^–4 . This is also shown by a theoretical calculation of its intensity. For the first time the NMR SQUID technique allowed the detection of the 4f ₀ line, corresponding to the simultaneous flip of four spins by one photon.     

DC and ac Josephson effects observed in high-temperature superconductor YBaCuO

We report the observation of the dc and ac Josephson effect and quasiparticle tunnelling in the high-temperature superconductor YBaCuO. The observation is made at 4.2 K. These effects were observed in a junction made by a niobium tip pressed against a high-T _c sample of YBaCuO ceramic. We observed a clean dc Josephson effect with a critical currentI _c 2 A and the ac effect with Shapiro steps corresponding toV=(hf/2e)n. The nature of the junction is not clear; however, we suggest that all observed effects can be explained by assuming a singlet pairing state in the ceramic. We have also observed a very peculiar noise behavior along theV-I characteristic.     

Target following with motion prediction for unmanned surface vehicle operating in cluttered environments

The capability of following a moving target in an environment with obstacles is required as a basic and necessary function for realizing an autonomous unmanned surface vehicle (USV). Many target following scenarios involve a follower and target vehicles that may have different maneuvering capabilities. Moreover, the follower vehicle may not have prior information about the intended motion of the target boat. This paper presents a trajectory planning and tracking approach for following a differentially constrained target vehicle operating in an obstacle field. The developed approach includes a novel algorithm for computing a desired pose and surge speed in the vicinity of the target boat, jointly defined as a motion goal, and tightly integrates it with trajectory planning and tracking components of the entire system. The trajectory planner generates a dynamically feasible, collision-free trajectory to allow the USV to safely reach the computed motion goal. Trajectory planning needs to be sufficiently fast and yet produce dynamically feasible and short trajectories due to the moving target. This required speeding up the planning by searching for trajectories through a hybrid, pose-position state space using a multi-resolution control action set. The search in the velocity space is decoupled from the search for a trajectory in the pose space. Therefore, the underlying trajectory tracking controller computes desired surge speed for each segment of the trajectory and ensures that the USV maintains it. We have carried out simulation as well as experimental studies to demonstrate the effectiveness of the developed approach.     

Mechanical properties of wollastonite‐reinforced polypropylene composites modified with SEBS and SEBS‐g‐MA elastomers

Mechanical properties of isotactic polypropylene/wollastonite/styrene rubber block copolymers (iPP/wollastonite/SRBC) composites were studied as a function of elastomeric poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) triblock copolymer (SEBS) and SEBS grafted with maleic anhydride (SEBS‐g‐MA) content from 0 to 20 vol%. Microphase morphology was stronger influenced by SRBC elastomers than by different wollastonite types. Higher encapsulation ability of SEBS‐g‐MA than SEBS caused more expressive core‐shell morphology and consequently higher notched impact strength as well as yield parameters, but lower Young's modulus. Higher ductility of the composites with SEBS than with SEBS‐g‐MA has been primarily caused by better miscibility of the polypropylene chains with SEBS molecules. Surface properties of components and adhesion parameters also indicated that adhesion at SEBS‐g‐MA/wollastonite interface, which was stronger than the one at the SEBS/wollastonite interface, influenced higher encapsulation of wollastonite particles by SEBS‐g‐MA. POLYM. ENG. SCI., 47:1873–1880, 2007. © 2007 Society of Plastics Engineers     

Dynamic light scattering measurements on the polystyrene/ethyl acetate system at semi-dilute concentrations as a function of temperature

Summary Measurements of autocorrelation functions extending over a broad time range are reported for a sample of polystyrene in ethyl acetate as a function of temperature between –44°C (-temperature) and 70°C. The corresponding spectra of decay times are obtained by two mathematical methods. The existence of three dynamic processes is shown and their temperature and angular behaviour is studied.