Investigating the tension load of rubber composites by impact dynamic testing

This work deals with establishing the tension load by impact dynamic testing of rubber composite conveyor belts. The value of tension load affects the shape of the used impactor and use of a support system as well as the weight of the ram and the impact height. An increase in the allowable stress when the belt is tensioned was examined during the test, to determine the effect of impact on the tension load. The obtained values of tension load are assessed using basic mathematical and statistical methods. Using the Design of Experiments method, factors that significantly affect the value of the tension load are identified.     

Corrosion of NiTi Wires with Cracked Oxide Layer

Corrosion behavior of superelastic NiTi shape memory alloy wires with cracked TiO₂ surface oxide layers was investigated by electrochemical corrosion tests (Electrochemical Impedance Spectroscopy, Open Circuit Potential, and Potentiodynamic Polarization) on wires bent into U-shapes of various bending radii. Cracks within the oxide on the surface of the bent wires were observed by FIB–SEM and TEM methods. The density and width of the surface oxide cracks dramatically increase with decreasing bending radius. The results of electrochemical experiments consistently show that corrosion properties of NiTi wires with cracked oxide layers (static load keeps the cracks opened) are inferior compared to the corrosion properties of the straight NiTi wires covered by virgin uncracked oxides. Out of the three methods employed, the Electrochemical Impedance Spectroscopy seems to be the most appropriate test for the electrochemical characterization of the cracked oxide layers, since the impedance curves (Nyquist plot) of differently bent NiTi wires can be associated with increasing state of the surface cracking and since the NiTi wires are exposed to similar conditions as the surfaces of NiTi implants in human body. On the other hand, the potentiodynamic polarization test accelerates the corrosion processes and provides clear evidence that the corrosion resistance of bent superelastic NiTi wires degrades with oxide cracking.     

Analysis of medications change in Parkinson’s disease progression data

Parkinson’s disease is a neurodegenerative disorder that affects people worldwide. Careful management of patient’s condition is crucial to ensure the patient’s independence and quality of life. This is achieved by personalized treatment based on individual patient’s symptoms and medical history. The aim of this study is to determine patient groups with similar disease progression patterns coupled with patterns of medications change that lead to the improvement or decline of patients’ quality of life symptoms. To this end, this paper proposes a new methodology for clustering of short time series of patients’ symptoms and prescribed medications data, and time sequence data analysis using skip-grams to monitor disease progression. The results demonstrate that motor and autonomic symptoms are the most informative for evaluating the quality of life of Parkinson’s disease patients. We show that Parkinson’s disease patients can be divided into clusters ordered in accordance with the severity of their symptoms. By following the evolution of symptoms for each patient separately, we were able to determine patterns of medications change which can lead to the improvement or worsening of the patients’ quality of life.     

Study of Eye Drops Dispensing and Dose Variability by Using Plastic Dropper Tips

ABSTRACT

The application of eye drops from flexible dropper bottles fitted with different types of dropper tips is associated with the high variability of eye drop weights. The aim of this report was to investigate the simultaneous effect of three factors influencing the mean weight of drops dispensing from two plastic dropper tips. Using a designed experiment (Box-Behnken), the effect of the concentration of benzalkonium chloride solutions (BAC) in the range of 0–0.02%, the dispensing angle from 90° to 30° from horizontal, and the residual volume of liquid in the dropper bottle from 4 to 10 mL on the mean drop weights were examined. The significant effect of the increase in BAC concentration resulted in a linear decrease in drop weights for both of the dropper tips investigated. The significant effect of the dispensing angle was influenced by the dropper tip design. For the dropper tip A, the effect of the dropper tip tilt was described by the quadratic equation with a minimum, which corresponded to the dispensing angle equal to that of 48° from horizontal. Below this angle, the increase in drop weights occurred due to the drop formation from the wetted external surface of the tip orifice. The linear decrease in drop weights in response to the decrease in dispensing angle was detected for the dropper tip B. The regression equations and the contour line plots obtained allowed the drop weights to be estimated for the actual combinations of both the BAC concentration and the dispensing angle. The effect of the residual volume was found to be non-significant. Based on the formula of Tate's law, the direct proportion between surface tension of a solution and the radius of the effective perimeter of a dropper tip can be used to estimate the theoretical maximal weight of drops at the dispensing angle of 90°. Using the stalagmometric values of surface tension of the BAC solutions, the maximal drop weights were estimated for both of the dropper tips investigated. A comparison between the theoretical and the experimentally measured drop weights enabled the dropper tips behavior to be discussed by using Harkins and Brown correction factor F. The F-value of 0.74 noted for the dropper tip A differed from that of stalagmometer F-value (0.61) indicating a deviation from the simple drop formation process in answer to more complicated design of the dropper tip A. On the other hand, the F-value of 0.6 observed for the dropper tip B demonstrated the better consistency with stalagmometry. As a result, the dropper tip B with the linear decrease of drop weights in response to the increased concentration of BAC and the decreased dispensing angle without the adverse external drop formation could be recommended in real drop dispensing.     

Parameters of TSMG Process for Y1.5Ba2Cu3O x System with CeO2 Addition

The TSMG process of YBCO bulk superconductors with Y_1.5Ba₂Cu₃O _x composition and 1 wt% CeO₂ addition has been studied. It is shown that the window for isothermal growth of single-crystalline sample grown from Sm123 seed is between 988 ^°C and 1003 ^°C. At lower temperatures of this window, Y123 crystals grow with higher growth rate but the quality of crystals is worse due to the formation of steps at the growth front. During an isothermal dwell at the optimized temperature, the growth of Y123 single-crystal stops due to decreasing peritectic temperature with increasing CuO concentration in the melt. Additional slow cooling 1 ^°C/hour from the temperature of isothermal growth leads to epitaxial growth of Y123 crystal over the entire sample. Only very narrow part at the rim of the sample contains CuO phase and blocky Y123 crystals are formed there due to self-nucleation.     

The stretch zone of automotive steel sheets

The paper deals with an experimental determination of the stretch zone dimensions in the notch tip in thin steel sheets. The stretch zone dimensions depend on steel grade, on the rolling direction as well as on the loading rate. Stretch zones were observed and measured on three steel grades. Fracture area and stretch zones were analysed by SEM. Stable crack growth was monitored by videoextensometry techniques on CT (Compact Tension) specimens. Specimens were loaded under two loading rates by eccentric tension, whereby the deformation in the notch surrounding area was recorded using a non-contact measurement–videoextensometry technique. Linear relation between the stretch zone dimensions was determined.