^60Coγ射线对刚地弓形虫缓殖子感染性的影响

应用不同剂量的~(60)Coγ射线照射含NT株弓形虫包囊的鼠脑匀浆后,以0.4％胰蛋白酶液消化,使弓形虫缓殖子从包囊中释放出来,并用生理盐水作连续10倍稀释,使成为含不同数量缓殖子的悬液,将此悬液接种小鼠,用生物检测方法确定其感染性。另设未经照射处理的缓殖子悬液感染小鼠的对照组。结果表明,γ射线0.55kGy剂量为控制鼠脑中NT株弓形虫感染性的最小有效剂量。γ射线0.1kGy剂量对弓形虫缓殖子感染性无明显影响,而0.45kGy照射后,其感染性较前者下降了10~4倍。     

过共晶Al－Si合金共生区激光表面处理

用２ｋＷ连续ＣＯ２激光对过共晶Ａｌ－１８Ｓｉ合金以不同能量密度和扫描速度进行快速熔凝处理。用扫描电镜、电子微区分析仪分析了微观结构。从计算机对Ａｌ－Ｓｉ合金ｆ－ｎｆ系统的非平衡理论计算所得的共生区及实验结果的分析可见，当能量密度和扫描速度决定的凝固条件处于共生区中部时，过共晶Ａｌ－Ｓｉ合金激光表面处理可以得到共晶间距低于２００ｎｍ的完全共晶结构。     

FED制作工艺研究

本文介绍了我们开发的ＦＥＤ工艺，包括；硅锥场致发射阵列的制作，栅极制作，阳极支柱的制作和平板透明真空封装，对工艺中的难点及对策作了详细描述。利用上述工艺，已经制成了平板数码管，其栅阴特性理想，阳阴之间也能测得明显的场致发射特性产伴有荧光激发。     

亲电聚合路线合成聚醚醚酮酮砜的研究

用4,4′-二苯氧基二苯砜(DPODPS)分别与对苯二甲酰氯(TPC)、间苯二甲酰氯(IPC)或2,5-二氯对苯二甲酰氯(DCC)在1,2-二氯乙烷(DCE)中,以无水 AlCl_3为催化剂,在 N-甲基吡咯烷酮(NMP)存在下,通过付-克亲电聚合反应,制得了五种不同结构的聚醚醚酮酮砜(简称PEEKKS)。用红外光谱(IR)、X-射线衍射(XRD)、扫描电镜(SEM)、差示扫描量热(DSC)、热重(TG)及耐溶剂试验,对聚合物进行了表征。结果表明,五种聚合物的对数比浓粘度(η_(inh))均达到0.85以上.具有较低的熔融温度、良好的溶解性能和耐高温性能,PEEKKS 属于非晶态聚合物。     

B—ISDN宽带UNI信令点到多点配置的实现

本文根据ＩＴＵ－Ｔ最新的Ｑ．２９７１协议，以及笔者所从事的实际课题，提出一整套Ｂ－ＩＳＤＮ第三层ＵＮＩ信令的软件实现策略，其特点是能同时满足用户对点到点以及点到多点广播这两种通信方式的要求，而且可以动态配置。     

WAVELET ALGORITHM FOR INTEGRAL OPERATOR EQUATION AND ITS APPLICATIONS TO ELECTROMAGNETIC PROBLEMS

A brief summary of the basic theory of wavelet is proposed. The properties of wavelet function are discussed. The possible applications of wavelet to electromagnetics are given. Examples show that the wavelet method is feasible and effective for solving electromagnetic problems.     

氧化锌压敏陶瓷烧结致密化过程的研究

本文研究了氧化锌压敏陶瓷的致密化过程，结果发现只有当烧结温度升高到一定值时，试样中的ＺｎＯ粉粒产生聚集，致密化过程才开始．致密化是瓷体获得稳定电性能的基础．低熔点添加剂Ｂ２Ｏ３可以降低致密化的起始温度，而致密化过程中的等温烧结对ＺｎＯ压敏陶瓷的最大密度几乎没有影响．     

Locally optimum rank detection of correlated random signals inadditive noise

Nonparametric detection of a zero-mean random signal in additive noise is considered. The locally optimum detector based on signs and ranks of observations is derived, for good weak-signal detection performance under any specified noise probability density function. This detector is shown to have interesting similarities to the locally optimum detector for random signals. It may also be viewed as a generalization of the locally optimum rank detector for known signals. Examples of the test statistic of the detector are given for some specific noise probability density functions. Asymptotic and finite sample-size performance of the locally optimum rank detector is also considered     

Cure reaction for modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide

The glass‐transition temperature as a function of curing conversion for a modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide (BMI) resin was investigated at different temperature regimes and modeled using a modified Di Benedetto equation. Although the relationship between the glass‐transition temperature and conversion of the BMI system conforms to the Di Benedetto equation for α < 0.6 and at lower cure temperatures, at higher cure temperatures the results deviated significantly from the equation; thus, it was an inadequate model for the system. Fourier transform IR analysis showed that the major crosslinking reactions did not occur during cure for the modified BMI at and below 150°C. However, as the cure temperature was increased, the crosslinking reactions responsible for 3‐dimensional network structures became more dominant. At 190°C the C? N? C_stretch vibration of the uncured maleimide ring converted into succinimide rings in the curing process. Simultaneously, a decrease was observed for the absorbance bands of ? C? H_bending (maleimide). The higher cure temperatures induced a significantly faster initial crosslinking rate and also resulted in a shorter period of time after which further crosslinking was retarded, because the increase in the crosslinks also physically slowed further crosslinking activity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 227–235, 2002     

Design aspects of planar and conventional SMPS transformer: a cost benefit analysis

The intent of this paper is to design a high-frequency transformer that is to be incorporated into the DC/DC pulsewidth-modulated switch-mode power supplies by two different technical approaches: a conventional wound-coil magnetic using copper wires, and a planar magnetic with layered copper tracks on laminated printed circuit board. Comparisons will be made between the two approaches in terms of profile: mounting height and surface area, and performance: power losses and efficiency. Other indicators like temperature rise and leakage inductance that causes electromagnetic interference, and cost, materials, and process fluency are also to be looked into. A sandwiched configuration for primary and secondary windings is proposed for the planar type. Issues arising and typical phenomena encountered will be discussed in detail. Primarily, the dominating factor in performance, cost effectiveness, or circuit compactness that restrains the choice of a particular type is to be evaluated.