Novel miniature integrated optical goniometers

A new principle and arrangement for directly determining the angle of incidence of an optical beam on an object are proposed and demonstrated. The novelty of the approach lies in the realization of a ‘smart object’, which extracts a portion of the incident beam's power into an optical waveguide attached to the object's surface or embedded in its body for converting the angle of incidence into the position of a guided beam with finite lateral extent. This ‘integrated optical light pointer’ beam is accomplished by means of creating additional degrees of freedom on the target in two different ways. While a first type is based on introducing spatial variations of the waveguide thickness, a second type makes use of a chirp of the grating periodicity. The feasibility for practical applications has been experimentally demonstrated by a direct comparison with a commercial high-resolution encoder, resulting in an r.m.s. error of <30′'. Measurements have been performed for chips fabricated based on replicated polycarbonate substrates and with no external optics, showing the great potential of this approach for realizing low-cost yet high-performance miniature goniometers.     

Muon spin relaxation study of amorphous Hf2Co

Muon spin relaxation measurements were carried out in zero magnetic field on amorphous Hf₂Co. The results obtained and comparison with the behaviour of the muon in crystalline Hf₂Co (A. Baudry, P. Boyer, L.P. Ferreira, S.W. Harris, S. Miraglia and L. Pontonnier, J. Phys.: Condens. Matter, 4 (1992) 5025) indicate that muons occupy interstitial sites without Co atoms in first-neighbour positions and diffuse through those sites, suggesting the existence of some degree of short-range order in the amorphous structure. Muon diffusion cannot be described by a single thermally activated process and is faster in the amorphous alloy than in the crystalline alloy.     

TiNi shape memory alloys prepared by normal sintering

This paper covers the use of conventional press and sinter of titanium and nickel equiatomic blends, involving transient liquid phases. A notable development has been the fabrication of homogeneous compacts from the elemental powders. Results indicate that employment of a double-stage sintering cycle is effective to sustain the geometrical integrity of the sintered sample. The TiNi alloy prepared in this manner exhibits a recovery strain of 4.6% by generating a restoring stress of 230 MPa, with a martensitic transformation point M_s of 34 °C.     

On-line coupled liquid chromatography-gas chromatography (LC-GC) and LC-LC-GC for detecting irradiation of fat-containing foods

Summary On-line coupled liquid chromatography-gas chromatography-flame ionisation detection (LC-GC-FID) enables efficient and unambiguous determination of irradiation for some fat-containing foods (e.g. meat). Other products, however, contain interfering components or are contaminated, e.g., with mineral oil. Since more selective detection by mass spectrometry has limited success, the determination was improved by a more selective isolation of some key components among the fat degradation products, e.g. the dienes or trienes, by LC-LC-GC-FID. Applications are shown for soup mixes, some spices, fish, and shrimps.

---

Nachweis der Bestrahlung fetthaltiger Lebensmittel durch direkt gekoppelte LC-GC und LC-LC-GC

Zusammenfassung Die Bestrahlung einiger fetthaltiger Lebensmittel, z. B. Fleisch, kann mit direkt gekoppelter LC-GC-FID rationell und eindeutig nachgewiesen werden. In anderen Proben wird die Analyse aber durch Inhaltsstoffe des Produktes oder durch Verunreinigungen (z. B. mit Mineralöl) gestört. Da selektivere Detektion durch Massenspektrqmetrie wenig verspricht, wurde der Nachweis durch selektivere Isolierung von Schlüsselkomponenten unter den Bestrahlungsprodukten, z. B. der Diene oder Triene, mittels LC-LC-GC yerbessert. Anwendungen werden gezeigt für Suppenpulver, einige Gewürze, Fisch und Garnelen.

     

IEA joint trials: New lessons from old plantations

Two international trials of potential biomass species families and clones planted in 1985 have been analyzed to determine changing patterns in growth, diseases, and insects. In the Swedish trial, with close spacing and short rotations, Salix viminalis clones gave the best average yield of 17.4 Mg/Ha/yr on the first coppice rotation. In the Minnesota, USA trial, with wider spacings and a longer rotation Populus alba hybrid clones gave the best average yields of 5.5 Mg/Ha/yr. The most important disease and insect problems encountered were Septoria musiva stem cankers on some Populus clones; frost die back in some Salix clones; and the leaf blotch miner, Fenusa dohrnii, on most Alnus families. Recommendations for future international cooperation in field trials are presented.     

Electrical characterization of porous BaTiO3 using impedance spectroscopy in humid condition

The humidity response characteristics of La doped BaTiO₃ with different sintered densities and room temperature electrical conductivities were investigated using complex impedance measurement. The samples with low density and high resistivity showed the large and nearly linear sensitivity to the change of humidity. The impedance spectra of samples, when exposed to high humidity, can exhibit microstructure-related features, even though they do not give rise to a noticeable characteristic change when exposed to low humidity. The observed impedance patterns were dependent upon the density, and hence the oxidation kinetics of BaTiO₃.     

窄带中频数字接收机高速信号处理技术

窄带中频数字接收机在雷达对抗侦察中得到了广泛应用，其高速信号处理技术是目前研究的重点。本文详细介绍了数字雷达告警接收机高速信号处理技术的发展现状和关键技术，最后通过对该技术的全面分析指出了值得深入研究的领域。     

Dielectric barrier discharge treatments at atmospheric pressure for wood surface modification

In this research, the effect of dielectric barrier discharge on mechanically manufactured (sawn, planed or polished) wood surfaces is investigated. The experiments have shown that the best hydrophilia is obtained with a cold plasma discharge in air under atmospheric pressure. Other gases such as helium, nitrogen, and argon have been tested, too. Changes of the wood surface properties were determined by absorption of water and contact angle measurements. As a result of a 1 to 20 seconds long exposure to plasma, wood surfaces became hydrophilic. The absorption of water in wood can be changed up to 22 times higher after plasma treatment in air for 20 seconds duration. The fracture strength of glued wood has been increased by 68% after this plasma pretreatment. Using plasma treatment in methane or acetylene wood surfaces are changed to hydrophobic properties. After plasma treatment for 1 min. in a Ar:CH₄=80:20 gas mixture under atmospheric pressure, the absorption of water in wood is 32 times lower than without plasma treatment. As mentioned before, plasma treatment can produce hydrophobic and hydrophilic wood surfaces. But a good homogeneity of the gas discharge is necessary for the plasma treatment of wood. Zusammenfassung Im Rahmen dieser Arbeit werden die Auswirkungen der dielektrisch behinderten Entladung bei Atmosphärendruck auf mechanisch bearbeitete Holzoberflächen (gesägt, gehobelt oder geschliffen) untersucht. Die Experimente haben gezeigt, dass die höchste Hydrophilität bei einem in Luftatmosphäre gezündetem Plasma erreicht wird. Es werden auch andere Gase verwendet, wie z.B. Helium, Stickstoff und Argon. Zur Untersuchung der veränderten mechanischen und energetischen Eigenschaften der Holzoberflächen werden der Tropfen-Versuch und die Kontaktwinkelmessung verwendet. Durch eine 1 bis 20 Sekunden lange Plasmabehandlung können die Oberflächen hydrophil gestaltet werden. So kann die Eindringzeit von Wasser um Faktor 22 gesteigert werden durch eine 20 Sekunden lange Plasmabehandlung in Umgebungsluft. Die Bruchfestigkeit von Leimholz wird durch die gleiche Plasmavorbehandlung um 68% gesteigert. Werden als Plasmabehandlungsgas Methan oder Acetylen eingesetzt, so wird die Holzoberfläche hydrophob. Durch eine 60 Sekunden lange Plasmabehandlung in einem Ar:CH₄=80:20 Gasgemisch bei Atmosphärendruck wird die Eindringszeit von Wasser um den Faktor 32 gesenkt. Mit Hilfe der Plasmabehandlung können also sowohl hydrophobe als auch hydrophile Holzoberflächen erzeugt werden. Jedoch wird für die Plasmabehandlung von Holz eine sehr homogene Gasentladung benötigt.     

Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading

This study deals with the impact property and damage tolerance of matrix hybrid composite laminates with different laminate constitution. The matrix hybrid composite laminates consisted of the laminae with a conventional epoxy resin and the laminae with a flexible epoxy resin modified from the conventional resin to avoid the interlaminar delamination. The impact energy absorption ratio greatly depended on the matrix resin placed at the impact face. The energy absorption was almost constant if the conventional resin was placed at the impact surface layer, while it increased exponentially with the increasing fraction of the flexible resin if the flexible resin was placed at the impact face. The impact energy was absorbed by the damage development and propagation in the laminate with conventional resin laminae as the impacted face, while it was absorbed by both the recoverable deformation of the flexible resin and the damage propagation in the laminate with flexible resin laminae as the impacted face.