High air stability of threshold voltage on gate bias stress in pentacene TFTs with a hydroxyl-free and amorphous fluoropolymer as gate insulators

We investigated the air stabilities of threshold voltages (V_th) on gate bias stress in pentacene thin-film transistors (TFTs) with a hydroxyl-free and amorphous fluoropolymer as gate insulators. The 40-nm-thick thin films of spin-coated fluoropolymer had excellent electrical insulating properties, and the pentacene TFTs exhibited negligible current hysteresis, low leakage current, a field-effect mobility of 0.45 cm²/Vs and an on/off current ratio of 3 × 10⁷ when it was operated at −20 V in ambient air. After a gate bias stress of 10⁴ s, a small V_th shift below 1.1 V was obtained despite non-passivation of the pentacene layer. We have discussed that the excellent air stability of V_th was attributed to the insulator surface without hydroxyl groups.     

An Optimal Grey PID Control System

The PID control algorithm has been widely applied in many industry control system to solve efficiently the control problems of manufacturing processes. However, PID control algorithm belong to “delay control”, because it functions on basis of the actions occurred in the system. Thus the control accuracy in real-time is limited. In this paper, in order to realize the accurate control in real-time, the grey model based on grey system theory is first proposed to combine with PID control to establish the control system. We define the proposed control system as grey PID control system. Then the cubic spline function is integrated into the grey model. to enhance the control accuracy of system. To further improve the performance, the particle swarm optimization (PSO) algorithm is employed to optimize the parameters of PID algorithm. Finally, we validated the effectiveness of the proposed control system by computer simulation. © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Video Scene Annotation Based on Web Social Activities

This article describes a mechanism to acquire the semantics of video content from the activities of Web communities that use a bulletin-board system and weblog tools to discuss video scenes.     

Ceramic molds suitable for rapid forming of CFRP composites via microwave irradiation

Carbon fiber reinforced plastic (CFRP) composites have been considered quite eminent structural materials. For more extensive applications, however, more rapid forming methods of the CFRP composites are required. As for CFRP composites with thermoplastic matrices, microwave heating and pressing with ceramic molds should be promising. In the present work, zirconia molds with varied thermal conductivity were employed to give a desired shape to the CFRP composites heated with microwave irradiation. Experimental results showed that use of the zirconia molds with smaller thermal conductivity results in shorter necessary time for the forming process. Mechanism of the notable change in the heating efficiency is discussed as well.     

Stable sound source tracking based on two updating algorithms

In this paper, we present a stable sound source tracking method based on two updating algorithm. In the method, an eigenvector spanning the signal subspace is updated by using the Projection Approximation Subspace Tracking (PAST) algorithm without the eigen‐decomposition of a correlation matrix. Then, a constrained minimization problem is formulated taking into account the stability, and the solution is determined successively by applying the Interior Point Least Square (IPLS) algorithm. As a result, stable tracking can be achieved without the peak search of a MUltiple SIgnal Classification (MUSIC) spectrum, which often requires enormous computational costs because many complex multiplying operations are involved. Several experimental results in real room environments have demonstrated the high accuracy and the low computational costs of the proposed method. © Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

High Levels of the Cleaved Form of Galectin-9 and Osteopontin in the Plasma Are Associated with Inflammatory Markers That Reflect the Severity of COVID-19 Pneumonia

Numbers of patients with coronavirus disease 2019 (COVID-19) have increased rapidly worldwide. Plasma levels of full-length galectin-9 (FL-Gal9) and osteopontin (FL-OPN) as well as their truncated forms (Tr-Gal9, Ud-OPN, respectively), are representative inflammatory biomarkers. Here, we measured FL-Gal9, FL-OPN, Tr-Gal9, and Ud-OPN in 94 plasma samples obtained from 23 COVID-19-infected patients with mild clinical symptoms (CV), 25 COVID-19 patients associated with pneumonia (CP), and 14 patients with bacterial infection (ID). The four proteins were significantly elevated in the CP group when compared with healthy individuals. ROC analysis between the CV and CP groups showed that C-reactive protein had the highest ability to differentiate, followed by Tr-Gal9 and ferritin. Spearman’s correlation analysis showed that Tr-Gal9 and Ud-OPN but not FL-Gal9 and FL-OPN, had a significant association with laboratory markers for lung function, inflammation, coagulopathy, and kidney function in CP patients. CP patients treated with tocilizumab had reduced levels of FL-Gal9, Tr-Gal9, and Ud-OPN. It was suggested that OPN is cleaved by interleukin-6-dependent proteases. These findings suggest that the cleaved forms of OPN and galectin-9 can be used to monitor the severity of pathological inflammation and the therapeutic effects of tocilizumab in CP patients.     

In Vivo Electrophysiology of Peptidergic Neurons in Deep Layers of the Lumbar Spinal Cord after Optogenetic Stimulation of Hypothalamic Paraventricular Oxytocin Neurons in Rats

The spinal ejaculation generator (SEG) is located in the central gray (lamina X) of the rat lumbar spinal cord and plays a pivotal role in the ejaculatory reflex. We recently reported that SEG neurons express the oxytocin receptor and are activated by oxytocin projections from the paraventricular nucleus of hypothalamus (PVH). However, it is unknown whether the SEG responds to oxytocin in vivo. In this study, we analyzed the characteristics of the brain–spinal cord neural circuit that controls male sexual function using a newly developed in vivo electrophysiological technique. Optogenetic stimulation of the PVH of rats expressing channel rhodopsin under the oxytocin receptor promoter increased the spontaneous firing of most lamina X SEG neurons. This is the first demonstration of the in vivo electrical response from the deeper (lamina X) neurons in the spinal cord. Furthermore, we succeeded in the in vivo whole-cell recordings of lamina X neurons. In vivo whole-cell recordings may reveal the features of lamina X SEG neurons, including differences in neurotransmitters and response to stimulation. Taken together, these results suggest that in vivo electrophysiological stimulation can elucidate the neurophysiological response of a variety of spinal neurons during male sexual behavior.     

Split Enzyme-Based Biosensors for Structural Characterization of Soluble and Insoluble β-Glucans

β-Glucan is widely distributed in various plants and microorganisms and is composed of β-1,3-linked d-glucose units. It may have a branched short or long side chain of glucose units with β-1,6- or β-1,4-linkage. Numerous studies have investigated different β-glucans and revealed their bioactivities. To understand the structure-function relationship of β-glucan, we constructed a split-luciferase complementation assay for the structural analysis of long-chain β-1,6-branched β-1,3-glucan. The N- and C-terminal fragments of luciferase from deep-sea shrimp were fused to insect-derived β-1,3-glucan recognition protein and fungal endo-β-1,6-glucanase (Neg1)-derived β-1,6-glucan recognition protein, respectively. In this approach, two β-glucan recognition proteins bound to β-glucan molecules come into close proximity, resulting in the assembly of the full-length reporter enzyme and induction of transient luciferase activity, indicative of the structure of β-glucan. To test the applicability of this assay, β-glucan and two β-glucan recognition proteins were mixed, resulting in an increase in the luminescence intensity in a β-1,3-glucan with a long polymer of β-1,6-glucan in a dose-dependent manner. This simple test also allows the monitoring of real-time changes in the side chain structure and serves as a convenient method to distinguish between β-1,3-glucan and long-chain β-1,6-branched β-1,3-glucan in various soluble and insoluble β-glucans.