Multiresidue method for pesticides and veterinary drugs in bovine milk using GC/MS and LC/MS/MS

A simple, sensitive and selective method with gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/tandem mass spectrometry (LC/MS/MS) has been developed to detect 342 pesticides and veterinary drugs contaminating bovine milk at the maximum residue limits (MRLs) defined in the "positive list system". Sample preparation was performed by extracting the analytes with acetonitrile, followed by salting-out with sodium chloride. For some pesticides, the extract was further cleaned up by n-hexane partitioning and PSA cartridge column chromatography. GC/MS-EI or -NCI was used to determine pesticide residues, while LC/MS/MS-ESI was applicable to the determination of pesticide and veterinary drug residues. The variation of the recoveries of these drugs at MRL was relatively wide; however the relative standard deviations of the recovery of each drug were within 28%, suggesting that the present method is good enough for use as a screening test for contaminants at the MRLs. These results show that this method is useful for multiresidue analysis of numerous pesticides and veterinary drugs in bovine milk.     

Investigation of the Aroma Profile of Green Tea Leaves Using Organic Synthesis and Conventional Analytical Techniques

Although many aroma components have been identified in green tea leaves, the aroma compounds contributing to green tea＇s characteristic odor have not yet been reported. The authors recently reported that aroma components with a matcha-like odor are present in both green tea and black tea prepared from the Sayamakaori tea cuttivar. This matcha-like odor is similar to the odor of commercial available matcha （high-quality powdered green tea）, and is a specific odor feature of green tea leaves. At present, the green-tea odor is thought to arise from the combination of a large number of constituents. Recent reports indicate that a complex interaction between olfactory receptors and odorants is important for the evaluation of the odors. Taking into consideration these findings, the authors investigated the aroma profile of green tea, focusing on the characteristic molecular structures of the constituents that give matcha-like odor. Using a combination of organic synthesis and gas chromatography-mass spectrometry plus gas chromatography-olfactometry, the authors identified aroma components with matcha-like odors in five other tea cultivars. This investigation also revealed that several compounds with a formyl group were important constituents of the aroma of green tea leaves, although the odor of each constituent was not individually similar to the tea＇s overall aroma. The authors found for the first time a group of key components that have the matcha-like odor.     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak

Static corrosion tests were performed in molten salts, LiF–BeF₂ (Flibe) and LiF–NaF–KF (Flinak), at 500 °C and 600 °C for 1000 h. The purpose is to investigate the corrosion characteristics of reduced activation ferritic steels, JLF-1 (8.92Cr–2W) in the fluids. The concentration of hydrogen fluoride (HF) in the fluids was measured by slurry pH titration method before and after the exposure. The HF concentration determined the fluoridation potential. The corrosion was mainly caused by dissolution of Fe and Cr into the fluids due to fluoridation and/or electrochemical corrosion. Carbon on the surface might be dissolved into the fluids due to the corrosion, and this resulted to the decrease of carbide on the surface. The corrosion depth of the JLF-1 specimen, which was obtained from the weight losses, was 0.637 μm in Flibe at 600 °C and 6.73 μm in Flinak at 600 °C.     

Effect of wall wettability condition on drift-flux parameters in lead–bismuth two-phase flow in circular and annular bubble columns

Lead–bismuth two-phase flow in a cylindrical vessel and annulus was experimentally investigated by varying the surface wettability of the vessel wall. The test section used in this study was a cylindrical stainless vessel with/without inner sleeve to change the hydraulic diameter. Volume-averaged void fraction was measured by varying the surface wettability of the test section, which was enhanced by using a soldering flux. Measured void fraction was compared with existing two-phase flow correlations and with one-dimensional theoretical simulations assuming one-dimensional drift-flux model. From experimental results, measured distribution parameters of the lead–bismuth two-phase flow are much larger than that of ordinary two-phase flow regardless of the surface wettability. In the present work, the one-dimensional analysis was carried out for the cylindrical vessel to reproduce the distribution parameter. From the simulation results, predicted value for the cylindrical vessel showed good agreement with experimental results. However, in annulus, the distribution parameters in annulus were underestimated by the present model. It was suggested that, in case of annulus, steeper void fraction profile might be formed near the inner surface for poor wettability condition.     

High-speed operation in printed organic inverter circuits with short channel length

We have demonstrated fast operation of printed organic inverter circuits. We employ a soluble organic semiconducting material which has high field-effect mobility and ink-jet printed source/drain electrodes with short channel length. Appropriate concentration of the semiconducting solution and modification layer of source/drain electrodes improve both mobility and on/off ratio. The fabricated transistors with a short channel length (4 μm) exhibit excellent mobility (1.2 cm²/V s), high on/off ratio (>10⁵) and operational stability. The diode-load inverter with a narrow channel and low parasitic capacitance operate at 8 kHz at 20 V. These results will lead to significant progress in applications of printed organic circuits.     

Kinetics of CO2 reforming of methane by catalytically activated metallic foam absorber for solar receiver-reactors

Ni–Cr–Al metallic foam absorber with high porosity was catalytically activated using a Ru/γ-Al₂O₃ catalyst, and was subsequently tested with respect to CO₂ reforming of methane in a small-scale volumetric receiver-reactor by using a sun-simulator. A chemical storage efficiency of 37% was obtained for a mean light flux of 325 kW m⁻². Furthermore, the activity and the stability of the metallic foam absorber were compared with those of a SiC foam absorber activated with the same Ru/γ-Al₂O₃ catalyst for 50 h of light irradiation, and it was found that the metallic foam absorber has superior catalytic stability in comparison to the SiC form absorber. In addition, unlike ceramic foams such as SiC, metallic foams feature superior plasticity, which prevents the emergence of cracks caused by mechanical or thermal shock.     

Wet dispersion mechanism of fine aggregates in multiphase flow with solid beads under simple shear

Clarifying the disintegration mechanism of aggregates in multiphase fluid flow coupled with beads and particulates is important for the optimum design of a wet dispersion process using a stirred media mill. Thus, we develop a numerical method for simulating multiphase flow with beads and particulates using a discrete element method and computational fluid dynamics, and we use the four‐way coupling simulation to study the fluid‐bead‐particulate‐coupled phenomenon that occurs in a simple shear box. The results show that the dominant force causing aggregate disintegration is the fluid force, rather than the bead contact force, because aggregates rarely collide with beads, contact force of which is too small to disintegrate aggregates. Furthermore, aggregates with strong aggregation force are effectively disintegrated by the fluid flow with a dominant high pure‐shear rate induced near the bead surfaces by the expansive force, rather than the compressive force. © 2014 American Institute of Chemical Engineers AIChE J 60: 4076–4085, 2014     

各种引气剂以及抑泡剂对混凝土经时变化状态等的影响

众所周知,采用粉煤灰制备混凝土,因粉煤灰成分中含有未燃炭等微粒子,容易造成阴离子型引气剂吸附在这些微粒子上,导致含气量经时损失.同时在混凝土的制备、运输过程中,因受采用的材料、拌和状态等物理因素影响,还会发生含气量经时增加的现象.所以在制备、管理混凝土时,如何保证出机初期一定的含气量、缓解含气量的经时损失或经时增加,是一项极其关键的技术.本文将就采用能改善上述状态的引气剂、抑泡剂拌和混凝土,对混凝土的经时变化以及抗冻融性等特征产生的影响进行论述.