Using Bounded Model Checking for Coverage Analysis of Safety-Critical Software in an Industrial Setting

Testing and Bounded Model Checking (BMC) are two techniques used in Software Verification for bug-hunting. They are expression of two different philosophies: testing is used on the compiled code and it is more suited to find errors in common behaviors, while BMC is used on the source code to find errors in uncommon behaviors of the system. Nowadays, testing is by far the most used technique for software verification in industry: it is easy to use and even when no error is found, it can release a set of tests certifying the (partial) correctness of the compiled system. In the case of safety critical software, in order to increase the confidence of the correctness of the compiled system, it is often required that the provided set of tests covers 100% of the code. This requirement, however, substantially increases the costs associated to the testing phase, since it often involves the manual generation of tests. In this paper we show how BMC can be productively applied to the Software Verification process in industry. In particular, we show how to productively use a Bounded Model Checker for C programs (CBMC) as an automatic test generator for the Coverage Analysis of Safety Critical Software. In particular, we experimented CBMC on a subset of the modules of the European Train Control System (ETCS) of the European Rail Traffic Management System (ERTMS) source code, an industrial system for the control of the traffic railway, provided by Ansaldo STS. The Code of the ERTMS/ETCS, with thousands of lines, has been used as trial application with CBMC obtaining a set of tests satisfying the target 100% code coverage, requested by the CENELEC EN50128 guidelines for software development of safety critical systems. The use of CBMC for test generation led to a dramatic increase in the productivity of the entire Software Development process by substantially reducing the costs of the testing phase. To the best of our knowledge, this is the first time that BMC techniques have been used in an industrial setting for automatically generating tests achieving full coverage of Safety-Critical Software. The positive results demonstrate the maturity of Bounded Model Checking techniques for automatic test generation in industry.     

Autonomic Self‐Healing of PEDOT:PSS Achieved Via Polyethylene Glycol Addition

Self‐healing electronic materials are of primary interest for bioelectronics and sustainable electronics. In this work, autonomic self‐healing of films obtained from mixtures of the conducting polymer poly(3,4‐ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS) and polyethylene glycol (PEG) is reported. The presence of PEG in PEDOT:PSS films decreases the elastic modulus and increases the elongation at break, thus leading to a softer material with enhanced self‐healing characteristics. In situ imaging of the cutting/healing process shows that the healing mechanism is likely due to flowing back of the material to the damaged area right after the cutting.     

Advantages of continuous hyperpolarized arrest with pinacidil over St. Thomas' Hospital solution during prolonged ischemia

vlf-1 is a baculovirus gene that regulates very late gene expression (J. R. McLachlin and L. K. Miller, J. Virol., 68, 7746-7756, 1994) and also plays a crucial role in the replication of the budded form of Autographa californica nuclear polyhedrosis virus (AcMNPV) (S. Yang and L. K. Miller, "Expression and mutational analysis of the baculovirus very late factor 1 (vlf-1) gene." Virology, 245, 99-109, 1998). To examine the influence of vlf-1 expression on baculovirus infection, we constructed recombinant viruses that expressed only low levels of VLF-1 and recombinants with vlf-1 under the control of different promoters. Viruses with mutant alleles of vlf-1 that produced low levels of VLF-1 replicated the budded form of the virus normally but produced no occlusion bodies. Thus, a higher concentration of VLF-1 was needed to activate very late gene expression than was needed to support budded virus production. By altering the level and/or timing of vlf-1 expression, the timing of polyhedrin gene (polh) expression, which normally occurs very late in infection, could be advanced or delayed. Early overexpression of vlf-1 increased the level of expression from the polh promoter but caused premature cellular disintegration. The data indicate that VLF-1 is the limiting factor in very late gene expression and that the level of VLF-1 controls the onset of occlusion.     

Mechano‐ and Photochromism from Bulk to Nanoscale: Data Storage on Individual Self‐Assembled Ribbons

A Pt(II) complex, bearing an oligo‐ethyleneoxide pendant, is able to self‐assemble in ultralong ribbons that display mechanochromism upon nanoscale mechanical stimuli, delivered through atomic force microscopy (AFM). Such observation paves the way to fine understanding and manipulation of the mechanochromic properties of such material at the nanoscale. AFM allows quantitative assessment of nanoscale mechanochromism as arising from static pressure (piezochromism) and from shear‐based mechanical stimuli (tribochromism), and to compare them with bulk pressure‐dependent luminescence observed with diamond‐anvil cell (DAC) technique. Confocal spectral imaging reveals that mechanochromism only takes place within short distance from the localized mechanical stimulation, which allows to design high‐density information writing with AFM nanolithography applied on individual self‐assembled ribbons. Each ribbon hence serves as an individual microsystem for data storage. The orange luminescence of written information displays high contrast compared to cyan native luminescence; moreover, it can be selectively excited with visible light. In addition, ribbons show photochromism, i.e., the emission spectrum changes upon exposure to light, in a similar way as upon mechanical stress. Photochromism is here conveniently used to conceal and eventually erase information previously written with nanolithography by irradiation.     

Films made from polyethylene‐co‐acrylic acid and soluble biopolymers sourced from agricultural and municipal biowaste

Blends were obtained from polyethylene‐co‐acrylic acid (PEAA) with 248 kDa molecular weight and two water soluble biopolymers isolated from the hydrolysate of postharvest tomato plant and urban biowaste compost. The two hydrolysates were constituted respectively from a polysaccharide (SP) with 27 kDa molecular weight and a lignin‐like polymer (LP) with 75 kDa molecular weight containing aliphatic and aromatic C moieties substituted by carboxyl, hydroxyl, and amino groups. Evidence was obtained for reactions occurring between the biopolymers and the synthetic polymer leading to new polymers with 151 to 1243 kDa molecular weights. The thermal and mechanical properties of the blends were studied. Compared with neat PEAA, the PEAA‐LP blends containing 5 to 10% LP exhibited 2 to 5× higher molecular weights, 10 to 50% lower crystallinity, 2 to 6× higher Young's modulus, over 3× higher stress at yield point and somewhat lower strain at break (55–280% vs. over 300%). On the contrary the PEAA‐SP blends exhibited 6 to 13% lower crystallinity and the same mechanical properties as neat PEAA. The results offer scope for investigating biopolymers sourced from other biowastes to understand more the reasons of the observed effects and exploit their full potential to modify or to replace synthetic polymers. Perspectives of economic and environmental benefits are discussed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41909.     

Transparent YAG obtained by spark plasma sintering of co-precipitated powder. Influence of dispersion route and sintering parameters on optical and microstructural characteristics

A fine-grained (330 nm) yttrium aluminium garnet (YAG) ceramic, presenting a non-negligible transparency (66% RIT at 600 nm), was obtained by spark plasma sintering. The YAG powder was manufactured by co-precipitation, starting from a yttrium and aluminium chlorides solution. A soft precursor was obtained, whose phase evolution was studied by X-ray diffraction. Calcined powders were dispersed by either ball milling or by ultrasonication and then subjected to spark plasma sintering at several temperatures (1200–1400 °C) and for a reduced time (15 min). It is shown that the dispersion method plays a key role in enhancing the optical characteristics of YAG ceramics, in order to obtain a material with a small grain size, transparent in both the visible and the infrared range.     

Chemical fingerprinting and bioactivity of Amazonian Ecuador Croton lechleri Müll. Arg. (Euphorbiaceae) stem bark essential oil: A new functional food ingredient?

Croton lechleri essential oil has been obtained by steam distillation of fresh stem bark from Amazonian Ecuador adult plants (yield: 0.61 ml/kg [0.061%]; density: 1.01 g/ml), and then chemically characterised by GC (Gas Chromatography) and GC–MS (gas chromatography–mass spectrometry). Seventy-four chemicals were detected and identified; the most abundant in descending order, were the sesquiterpenes sesquicineole (17.29%), α-calacorene (11.29%), 1,10-di-epi-cubenol (4.75%), β-calacorene (4.34%) and epi-cedrol (4.09%). Monoterpenes checked with a relative peak area higher than 2.0% were α-pinene (2.01%), p-cymene (2.61%), limonene (4.20%) and borneol (2.67%). The structure of the main chemicals were confirmed by GC–MS and ¹H NMR analyses. Spectrophotometric 1,1-diphenyl-2-picrylhydrazyl (DPPH) and DPPH-(high performance) thin layer chromatography (DPPH-(HP)TLC) bioautographic assays showed a lower radical scavenging capacity (IC₅₀) with respect to commercial thyme essential oil and BHA (butylated hydroxyl anisole), pointing out, however, that the C. lechleri essential oil fraction, characterised by α-calacorene, β-calacorene and δ-cadalene, was the most involved in the bioactivity. Similar results were obtained with β-carotene bleaching assay, where the IC₅₀ values were 0.291 ± 0.024 mg/ml for C. lechleri essential oil, 0.164 ± 0.013 and 1.34 × 10⁻⁴ ± 10⁻⁵ mg/ml for thyme essential oil and BHA, respectively. (HP)TLC-bioautographic assay performed with Gram positive and Gram negative bacteria revealed a minimum inhibitory concentration (MIC) values comprised between 0.10 mg/ml (Escherichia coli) and 10.10 mg/ml (for e.g. Pseudomonas aeruginosa), and the fraction mainly characterised by sesquicineole (97.38%) as the most involved in antibacterial capacity. Ames test employing Salmonella typhimurium TA98 and TA100 with and without a metabolic activation mixture (S9 mix) demonstrated the absence of mutagenicity of the C. lechleri essential oil between a concentration range of 10⁻² and 100 mg/plate. The same results were achieved by Saccharomyces cerevisiae D7 strain assay. An interesting mutagen-protective efficacy was evidenced by a 30% and 33% revertants reduction of TA98 strain treated with 2-aminoanthracene and nitrofluorene (2 μg/plate), suggesting, above all, the possibility to employ C. lechleri essential oil as a new flavouring protective ingredient for foods or dietary supplements against potential mutagens formed during cooking and/or processing in general.     

Vehicle-to-Grid Technology： State-of-the-Art and Future Scenarios

An overview of V2G （vehicle-to-grid） technology is presented in this paper, it aims to highlight the main features, opportunities and requirements of V2G. Thus, after briefly resuming the most popular charging strategies lbr PEVs （plug-in electric vehicles）, the V2G concept is introduced, especially highlighting its potentiality as a revenue opportunity ｜br PEV owners： this is mainly due to the V2G ability to provide ancillary services, such as load leveling, regulation and reserve. Such solutions have been thoroughly investigated in the literature from both the economic and technical points of view and are here reported. In addition, V2G requirements such as mobility needs, charging stations availability and appropriate PEV aggregative architectures are properly taken into account. Finally, future developments and scenarios have also been reported.     

A novel approach to speed and parameters estimation in inductionmotor drives

With reference to speed controlled induction motor drives, an algorithm which allows the on-line estimation either of the speed and one motor parameter or, alternatively, of two motor parameters, is presented in the paper. The results obtained by simulation fully confirm the validity of the proposed algorithm. Finally, the problems arising from the implementation of the proposed algorithm on a DSP-based control hardware are analysed     

Induced Chiral Chromonics Confined in Micrometric Droplets

Chirality emergence in biological systems is common but the chiral expression from the molecular to macroscopic level in water-based systems is poorly understood. Among water-based systems, chromonic liquid crystals have recently received a lot of attention due to the spontaneous chirality they show when confined in curved geometries. Confinement of chiral-induced chromonics is not trivial since they are three component systems whose time stability is a delicate thermodynamic balance. In this work, a well-defined periodic Frank–Pryce texture, typical of chiral thermotropic liquid crystals, is observed in microspheres of a chiral induced chromonic embedded in a poly(dimethylsiloxane) matrix. This texture slowly degrades in time and a possible mechanism behind the degradation process is suggested via X-ray diffraction and atomic force microscopy measurements on thin chromonic films. To stabilize this texture and to control the structure periodicity, cations are added to the three components system in an attempt to tune the non-covalent interactions between molecules and supramolecular stacks. The study of the effects of this addition allows for better insight into the molecular interactions that occur in the chiral induced mesophase. This is a crucial point in view of possible biocompatible technological applications.