Polyimide foams with ultralow dielectric constants

To explore ultralow dielectric constant polyimide, the crosslinked polyimide foams (PIFs) were prepared from 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA), 4,4′‐oxydianiline (ODA), and 2,4,6‐triaminopyrimidine (TAP) via a poly(ester–amine salt) (PEAS) process. FTIR measurements indicated that TAP did not yield a negative effect on imidization of PEAS precursors. SEM measurement revealed the homogeneous cell structure. Through using TAP as a crosslinking monomer, the mechanical properties of PIFs could be improved in comparison with uncrosslinked BTDA/ODA based PIF. The crosslinked PIFs still exhibited excellent thermal stability with 5% weight loss temperatures higher than 520°C. In the field with frequency higher than 100 Hz, the dielectric constants of the obtained PIFs ranged from 1.77 to 2.4, and the dielectric losses were smaller than 3 × 10^?2 at 25–150°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1734–1740, 2006     

Thermal and mechanical properties of the polymers synthesized by the sequential polymerization of propylene and 1‐hexadecene

The block copolymer of poly(1‐hexadecene) (PHD) and polypropylene (PP) was effectively synthesized by the sequential polymerization of propylene and 1‐hexadecene by using highly isospecific TiCl₃/Cp₂Ti(CH₃)₂ (Cp = cyclopentadienyl). The block copolymers had two separate melting temperatures of constituent blocks. The modulus of PHD–PP block copolymer was enhanced as the content of sequentially polymerized PP block was increased. The elongation at break showed positive deviation at the intermediate compositions from the simple additive values of constituent homopolymers. Shape memory effect which utilizes the crystalline PHD block as a reversible phase and the crystalline PP block as a fixed structure was examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1709–1715, 2002; DOI 10.1002/app.10551     

The participation of block copolymers in the increase in the number of tie molecules

Three-block copolymers polyamide-block-polyX-block-polyamide (where X is styrene, ethylene-co-1-butene, and others) are able to improve substantially the toughness of poly(ϵ-caprolactam). Outer blocks of these copolymers are able to take part in folding lamellae of semi-crystalline polyamide, inner blocks are not. They operate as a spacer, meaning that the end blocks of copolymers capable of folding become parts of different lamellae, or that the unfoldable part of a block copolymer is pushed out of a folding lamella with a certain probability of the remaining outer block taking part in folding another lamella. This increases the number of tie-molecules.     

An investigation on wear behavior of UHMWPE/carbide composites at elevated temperatures

Ultra-high molecular weight polyethylene (UHMWPE) is extensively used in frictional applications due to its advanced wear resistance. This advanced polymer is reinforced with hard particulate fillers for further developments against wear conditions. Since elevated temperatures prevail in the service conditions, wear behavior of UHMWPE composites is an important issue for the engineering applications. In the present work, UHMWPE-based composites including silicon carbide (SiC) fillers were fabricated in a compression molding chamber. In the specimen preparation stage, molding pressure, filler amount, and filler particle size were varied to investigate the influence of these variables. Upon deciding the optimum parameters from the wear tests conducted at room temperature, the wear experiments were repeated for the optimum specimen at elevated temperatures, such as 40 and 60°C. According to the results, the wear behavior of the SiC/UHMWPE composites is heavily changed by the effect of elevated temperature. Adhesive effect is pronounced at elevated temperatures while the wear characteristics possess the abrasive effect in the sliding path. In addition, the composites exhibit an accelerated material loss as temperature increases during the frictional system.     

FE approach and experiments for an axisymmetric micro-yoke part forming using grain element and grain boundary element

Until present, an axisymmetric yoke part of electro-magnetic micro-speaker/receiver had manufactured by machining through the material’s removal. However, this machining process have some problems such as long production time, high precision of tool and costs. In this study, a program based on finite element method developed to establish milli-structure forming technology for micro-yoke component, one of the key parts in the multi-functioned micro-speaker/receiver. This developed program is applied for the milli-part forming in order to replace the machining process of micro-yoke. A new numerical approach is proposed to simulate intergranular milli-structure in forming the miniature yoke, in which grain elements and grain boundary elements are introduced. The results of the finite element analysis for micro-yoke part are confirmed by a series of experiments.     

新型咪唑啉衍生物油田注水缓蚀剂的研究

使用长链脂肪酸、多胺、甲醛和三氯化磷等为原料合成了咪唑啉有机膦酸类缓蚀剂。在模拟油田注水条件下，采用静态挂片、极化曲线和交流阻抗等测试方法评价了缓蚀剂的缓蚀性能，并对缓蚀剂的成膜机理进行了一些研究与探讨。     

Formulating the template ILP consistency problem as a constraint satisfaction problem

Inductive Logic Programming (ILP) deals with the problem of finding a hypothesis covering positive examples and excluding negative examples, where both hypotheses and examples are expressed in first-order logic. In this paper we employ constraint satisfaction techniques to model and solve a problem known as template ILP consistency, which assumes that the structure of a hypothesis is known and the task is to find unification of the contained variables. In particular, we present a constraint model with index variables accompanied by a Boolean model to strengthen inference and hence improve efficiency. The efficiency of models is demonstrated experimentally.     

Limitations of a Mapping Algorithm with Fragmentation Mimics (MAFM) when modeling statistical data sources based on measured packet network traffic

Knowing the estimation of a statistical process’s parameters for measured network traffic is very important as it can then be further used for the statistical analyses and modeling of network traffic in simulation tools. It is for this reason that different estimation methods are proposed that allow estimations of the statistical processes of network traffic. One of them is our own histograms comparison (EMHC) based method that can be used to estimate statistical data-length process parameters from measured packet traffic. The main part of EMHC method is Mapping Algorithm with Fragmentation Mimics (MAFM).     

Fuzzy FMEA application to improve purchasing process in a public hospital

Failure mode and effects analysis (FMEA) is one of the well-known techniques of quality management that is used for continuous improvements in product or process designs. While applying this technique, determining the risk priority numbers, which indicate the levels of risks associated with potential problems, is of prime importance for the success of application. These numbers are generally attained from past experience and engineering judgments, and this way of risk assessment sometimes leads to inaccuracies and inconsistencies during priority numbering. Fuzzy logic approach is preferable in order to remove these deficiencies in assigning the risk priority numbers. In this study, a fuzzy-based FMEA is to be applied first time to improve the purchasing process of a public hospital. Results indicate that the application of fuzzy FMEA method can solve the problems that have arisen from conventional FMEA, and can efficiently discover the potential failure modes and effects. It can also provide the stability of process assurance.