Magnetic field-driven induction of ZENK in the trigeminal system of pigeons (Columba livia)

Magnetoreception remains one of the few unsolved mysteries in sensory biology. The upper beak, which is innervated by the ophthalmic branch of the trigeminal nerve (V1), has been suggested to contain magnetic sensors based on ferromagnetic structures. Recently, its existence in pigeons has been seriously challenged by studies suggesting that the previously described iron-accumulations are macrophages, not magnetosensitive nerve endings. This raised the fundamental question of whether V1 is involved in magnetoreception in pigeons at all. We exposed pigeons to either a constantly changing magnetic field (CMF), to a zero magnetic field providing no magnetic information, or to CMF conditions after V1 was cut bilaterally. Using immediate early genes as a marker of neuronal responsiveness, we report that the trigeminal brainstem nuclei of pigeons, which receive V1 input, are activated under CMF conditions and that this neuronal activation disappears if the magnetic stimuli are removed or if V1 is cut. Our data suggest that the trigeminal system in pigeons is involved in processing magnetic field information and that V1 transmits this information from currently unknown, V1-associated magnetosensors to the brain.     

Novel NGR anchored pullulan micelles for controlled and targeted delivery of doxorubicin to HeLa cancerous cells

Doxorubicin (DOX) is used to treat different kinds of cancers, including cervix carcinoma. However, it has various side effects such as cardiotoxicity. Nano-sized controlled releasing carriers such as polymeric micelles are of interesting approaches to overcome these side effects of doxorubicin in cancer chemotherapy. Regarding the up-regulation of CD13/APN receptors on the cervix carcinoma cells, which can bind to peptide sequences specially NGR (asparagine–glycine–arginine) with high affinity, peptide sequence (NGR) targeted micelles would lead to effective treatment of this carcinoma. In this study, the NGR peptide sequence was synthesized using the solution-phase strategy from asparagine, glycine, and arginine residues. The pullulan–retinoic acid conjugate and pullulan–retinoic acid–NGR conjugate were prepared by the amide and ester bond formation between the hydroxyl groups of pullulan and carboxylic acid groups of retinoic acid and peptide sequence. Pullulan–retinoic acid–NGR micelles were prepared by the direct dissolution method. The optimized micelles, according to their particle size (124.5 nm), zeta potential (? 3.65 mV), entrapment efficiency (85%), and release of DOX (70%, within 72 h) were assessed for their cytotoxicity on HeLa cells using MTT assay. NGR-targeted pullulan/retinoic acid micelles had higher cytotoxicity than the free DOX in cell culture studies on the HeLa cell line, and this can be a promising result in the treatment of cervix carcinoma.     

Collaborative Production: Building Opportunities in Japan

The manner in which buildings are constructed in Japan differs significantly from the United States. My intention here is to discuss flexibilities in production. These flexibilities exist in three chief areas: Original contracts and documents are more schematic, responsibility for document production and detailing can be shared with the contractor, and manufacturing is structured in such a way as to allow for greater customization. The opportunities that emerge as a result of these differences offer a provocative challenge and critique to current U.S. architectural practices.     

Chain flexibility versus molecular entanglement response to rubbing deformation in designing poly(oxadiazole-naphthylimide)s as liquid crystal orientation layers

Four poly(oxadiazole-imide)s containing naphthalene rings, with different flexibility and molecular weight, are investigated with respect to their rheological properties to establish the optimal processing conditions from solution phase to film state for liquid crystal orientation purposes. The film uniformity and strength are determined by monitoring the flow behavior and chain entanglements. The solution rheological data are in agreement with film tensile testing, revealing that higher molecular weight favors chain entanglements and implicitly the film mechanical resistance. In order to analyze the suitability of these films as alignment layers their surface is patterned by rubbing with two types of velvet. Liquid crystal alignment of 4′-pentyl-4-biphenylcarbonitrile nematic is tested by polarized light microscopy. The resulting behavior is correlated with the polyimide malleability and characteristics of the textile fibers, namely their polarity, size, and mechanical features. The competitive effects between chain flexibility and entanglements, together with the interactions occurring between the polymer and velvet are analyzed in order to explain the surface regularity, which influences the uniformity of the liquid crystal alignment. The contrast between dark and bright states recorded on the liquid crystal cell indicates that some of these polynaphthalimides are promising candidates for liquid crystal display devices.     

The Effects of Exercise and Activity-Based Physical Therapy on Bone after Spinal Cord Injury

Spinal cord injury (SCI) produces paralysis and a unique form of neurogenic disuse osteoporosis that dramatically increases fracture risk at the distal femur and proximal tibia. This bone loss is driven by heightened bone resorption and near-absent bone formation during the acute post-SCI recovery phase and by a more traditional high-turnover osteopenia that emerges more chronically, which is likely influenced by the continual neural impairment and musculoskeletal unloading. These observations have stimulated interest in specialized exercise or activity-based physical therapy (ABPT) modalities (e.g., neuromuscular or functional electrical stimulation cycling, rowing, or resistance training, as well as other standing, walking, or partial weight-bearing interventions) that reload the paralyzed limbs and promote muscle recovery and use-dependent neuroplasticity. However, only sparse and relatively inconsistent evidence supports the ability of these physical rehabilitation regimens to influence bone metabolism or to increase bone mineral density (BMD) at the most fracture-prone sites in persons with severe SCI. This review discusses the pathophysiology and cellular/molecular mechanisms that influence bone loss after SCI, describes studies evaluating bone turnover and BMD responses to ABPTs during acute versus chronic SCI, identifies factors that may impact the bone responses to ABPT, and provides recommendations to optimize ABPTs for bone recovery.     

Evaluation of Oxidative Stress Biomarkers,Pro-Inflammatory Cytokines,and Histological Changes in Experimental Hypertension,Dyslipidemia, and Type 1 Diabetes Mellitus

The present study aims to compare the oxidative stress biomarkers, pro-inflammatory cytokines, and histological changes induced by three cardiovascular risk factors, namely, hypertension, dyslipidemia, and type 1 diabetes mellitus. Hypertension was induced with 40 mg/kg body weight (b.w.) of N omega-nitro-L-arginine-methyl (L-NAME) administered orally. Dyslipidemia was induced by the administration of a diet with a high cholesterol (2%) content. Diabetes mellitus was induced by intraperitoneal administration of a single dose of streptozocin (65 mg/kg). Malondialdehyde (MDA) and total oxidative status (TOS) are increased by all three cardiovascular risk factors (up to 207%). The indirect assessment of NO synthesis (NOx) is observed to be reduced after L-NAME administration (43%), and dyslipidemia induction (16%), while type 1 diabetes mellitus is associated with the highest levels of NOx (increased 112%). Hypertension, dyslipidemia, and type 1 diabetes reduced the total antioxidative capacity (TAC) and total thiol (SH) levels (up to 57%). The values of evaluated pro-inflammatory cytokines, tumour necrosis factor-α (TNF-α), interleukin-6 (IL-6), and interleukin-1β (IL-1β), assessed from the ascending aorta were elevated by all three cardiovascular risk factors, with the highest levels induced by type 1 diabetes mellitus (up to 259%). The histopathological examination of the ascending and descending aorta revealed reversible pro-atherogenic changes consisting of the accumulation of lipid droplets in the subendothelial connective tissue on rats with hypertension and dyslipidemia. Irreversible pro-atherogenic changes consisting of a reduction of the specific elasticity of the arteries were observed in rats with type 1 diabetes mellitus. Type 1 diabetes mellitus demonstrates an alteration of the oxidative stress parameters, the elevation of tissue levels of the pro-inflammatory cytokines and causing irreversible pro-atherogenic changes on the aortic wall.     

Optimization of a continuous ultrasound assisted oxidative desulfurization (UAOD) process of diesel using response surface methodology (RSM) considering operating cost

A continuous-flow ultrasound-assisted oxidative desulfurization(UAOD) of partially hydro-treated diesel has been investigated using hydrogen peroxide-formic acid as simple and easy to apply oxidation system. The effects of different operating parameters of oxidation stage including residence time(2–24 min), formic acid to sulfur molar ratio(10–150), and oxidant to sulfur molar ratio(5–35) on the sulfur removal have been studied using response surface methodology(RSM) based on Box–Behnken design. Considering the operating costs of the continuous-flow oxidation stage including chemical and electrical energy consumption, the appropriate values of operating parameters were selected as follows: residence time of 16 min, the formic acid to sulfur molar ratio of 54.47, and the oxidant to sulfur molar ratio of 8.24. In these conditions, the sulfur removal and the volume ratio of the hydrocarbon phase to the aqueous phase were 86.90% and 4.34, respectively. By drastic reduction in the chemical consumption in the oxidation stage, the volume ratio of the hydrocarbon phase to the aqueous phase was increased up to 10. Therefore, the formic acid to sulfur molar ratio and the oxidant to sulfur molar ratio were obtained 23.64 and 3.58, respectively, which lead to sulfur removal of 84.38% with considerable improvements on the operating cost of oxidation stage in comparison with the previous works.     

N‐Arylsulfonyl Indolines as Retinoic Acid Receptor‐Related Orphan Receptor γ (RORγ) Agonists

The nuclear retinoic acid receptor‐related orphan receptor γ (RORγ; NR1F3) is a key regulator of inflammatory gene programs involved in T helper 17 (T_H17) cell proliferation. As such, synthetic small‐molecule repressors (inverse agonists) targeting RORγ have been extensively studied for their potential as therapeutic agents for various autoimmune diseases. Alternatively, enhancing T_H17 cell proliferation through activation (agonism) of RORγ may boost an immune response, thereby offering a potentially new approach in cancer immunotherapy. Herein we describe the development of N‐arylsulfonyl indolines as RORγ agonists. Structure–activity studies reveal a critical linker region in these molecules as the major determinant for agonism. Hydrogen/deuterium exchange coupled to mass spectrometry (HDX‐MS) analysis of RORγ–ligand complexes help rationalize the observed results.     

高产刺糖菌素发酵菌株的选育

采用紫外线结合氯化锂以及硫酸二乙酯结合氯化锂2种常规诱变方法对刺糖多孢菌进行复合诱变,分别筛选鼠李糖抗性突变株、2-脱氧-D-葡萄糖抗性突变株和刺糖菌素抗性突变株,并结合自然分离纯化,最终获得高产菌株D-S-23,其产量达N89.57 mg/L,较出发菌株提高了104.3%.     

Reliability simulation of solar concentrator receiver

The reliability of solar concentrator is investigated using finite element (FE) modelling. An FE model of the receiver absorber is built and simulated using latin hypercube sampling. A transient thermal structural simulation is conducted, and the maximum thermal stress affecting the absorber is determined. Based on the failure criterion, the most effective parameters are determined and assigned as random variables. A stochastic simulation is performed resulting in a probability density function (PDF) of the thermal stress-life. The PDF is used to estimate the reliability of the absorber. Different designs and materials of the absorber tubes are investigated. Consequently, methods to improve the reliability of the absorber are identified.