Correction of <Emphasis Type="Italic">B</Emphasis><Subscript>0</Subscript>-induced geometric distortion variations in prospective motion correction for 7T MRI

Objective

Prospective motion correction can effectively fix the imaging volume of interest. For large motion, this can lead to relative motion of coil sensitivities, distortions associated with imaging gradients and B ₀ field variations. This work accounts for the B ₀ field change due to subject movement, and proposes a method for correcting tissue magnetic susceptibility-related distortion in prospective motion correction.

Materials and methods

The B ₀ field shifts at the different head orientations were characterized. A volunteer performed large motion with prospective motion correction enabled. The acquired data were divided into multiple groups according to the object positions. The correction of B ₀-related distortion was applied to each group of data individually via augmented sensitivity encoding with additionally integrated gradient nonlinearity correction.

Results

The relative motion of the gradients, B ₀ field and coil sensitivities in prospective motion correction results in residual spatial distortion, blurring, and coil artifacts. These errors can be mitigated by the proposed method. Moreover, iterative conjugate gradient optimization with regularization provided superior results with smaller RMSE in comparison to standard conjugate gradient.

Conclusion

The combined correction of B ₀-related distortion and gradient nonlinearity leads to a reduction of residual motion artifacts in prospective motion correction data.

     

The traveling heads: multicenter brain imaging at 7 Tesla

Objective

This study evaluates the inter-site and intra-site reproducibility of 7 Tesla brain imaging and compares it to literature values for other field strengths.

Materials and methods

The same two subjects were imaged at eight different 7 T sites. MP2RAGE, TSE, TOF, SWI, EPI as well as B1 and B0 field maps were analyzed quantitatively to assess inter-site reproducibility. Intra-site reproducibility was measured with rescans at three sites.

Results

Quantitative measures of MP2RAGE scans showed high agreement. Inter-site and intra-site reproducibility errors were comparable to 1.5 and 3 T. Other sequences also showed high reproducibility between the sites, but differences were also revealed. The different RF coils used were the main source for systematic differences between the sites.

Conclusion

Our results show for the first time that multi-center brain imaging studies of the supratentorial brain can be performed at 7 T with high reproducibility and similar reliability as at 3T. This study develops the basis for future large-scale 7 T multi-site studies.

     

Simultaneous generation and correlation of complete sets of generalized pairwise complementary sequences

New coding schemes are increasingly being developed to adapt multisensor and communication systems to the requirements of the current technological environment. In some cases, the practical implementation of these schemes involves a great amount of signal processing operations. In order to achieve and make suitable their use in different platforms, efficient algorithms are required to process coding. In the last years, a new kind of complementary sequences, known as Generalized Pairwise Complementary sequences, has been proposed. These sequences provide high noise immunity when they are applied to multiuser systems, as well as a low cross‐correlation, which is convenient in those applications. The aim of this paper is to propose optimized generation and correlation architectures for Generalized Pairwise Complementary sequences that would allow to process a complete set using a reduced amount of operations. An analytical demonstration is provided, with a final comparison to evaluate the reduction with regard to other algorithms. Copyright © 2015 John Wiley & Sons, Ltd.     

Digital Control of a Power Conditioner for Fuel Cell/Super-capacitor Hybrid System

This article proposes a digital control scheme to operate a proton exchange membrane fuel cell module of 1.2 kW and a super-capacitor through a DC/DC hybrid converter. A fuel cell has been proposed as a primary source of energy, and a super-capacitor has been proposed as an auxiliary source of energy. Experimental validation of the system implemented in the laboratory is provided. Several tests have been performed to verify that the system achieves excellent output voltage (V₀) regulation and super-capacitor voltage (V_SC) control under disturbances from fuel cell power (P_FC) and output power (P₀) as well as other perturbations described in analysis results.     

New high-pressure phase of HfTiO4 and ZrTiO4 ceramics

We studied the high-pressure effects on the crystalline structure of monoclinic HfTiO₄ and ZrTiO₄. We found that the compressibility of these ceramics is highly non-isotropic, being the b-axis the most compressible one. In addition, the a-axis is found to have a small and negative compressibility. At 2.7 GPa (10.7 GPa) we discovered the onset of a structural phase transition in HfTiO₄ (ZrTiO₄), coexisting the low- and high-pressure phases in a broad pressure range. The new high-pressure phase has a monoclinic structure which involves an increase in the Ti-O coordination and a collapse of the cell volume. The equation of state for the low-pressure phase is also determined.     

Calculation of Transmission Line Parameters From Synchronized Measurements

Accurate knowledge of transmission system parameters, such as series impedance, optimizes distance relay settings and impedance-based fault location. A new method is developed to measure transmission line impedances and admittances from synchronized phasor measurements. Power system voltage and current phasors were recorded during commissioning tests of a 525 kV transmission system containing shunt and series compensation. Steady-state phase angles (delta) and magnitudes of line-side voltages and currents were measured relative to a satellite-based global time standard at two substations. Pairs of synchronized measurements were used to directly calculate real-time steadystate ABCD parameters. For comparison, two-port ABCD transmission system parameters were derived by classical methods and from an ElectroMagnetics Transients Program (EMTP) transmission system design model. To verify the accuracy of the measured parameters, a new method comparing field measured with calculated power flows was developed. Sending-end power flow was measured from accurate recordings and was compared with power flow calculated using the three estimates of ABCD parameters, sendingend voltages, and receiving-end voltages. Close agreement was found between field-measured power flows and calculations using the measured ABCD parameters.     

Evaluation of elemental profile coupled to chemometrics to assess the geographical origin of Argentinean wines

Traceability of wines requires knowledge of their characteristics, which are associated with the geographical origin of grape, soil, water, climate as well as the winery techniques. The aim of this work was to classify wines and soil from three production areas of Argentina according to multielement data. The influence of the provenance soil on the wine element composition was also investigated.Eleven elements were determined in 31 wine samples and 137 soil samples from regions under study. Stepwise discriminant analysis allows us to correctly classify 100% of the wines analysed from the three regions using only seven parameters (K, Fe, Ca, Cr, Mg, Zn and Mn) and 92% correct classification for soils using seven variables (Ca, Cr, K, Fe, Cu, Zn and, Mg). Canonical analysis between soils and wines datasets affords a correlation coefficient of 0.85 (P-value < 0.001). Thus, almost 85% of variability observed amongst wines could be attributed to the soil in which the vines were cultivated.The analysis of elemental concentrations in the wines and soils, in combination with chemometrics, provides a powerful tool to verify the geographical origin of wines.     

MRI of human hair

Introduction  Hair care for humans is a major world industry with specialised tools, chemicals and techniques. Studying the effect of hair care products has become a considerable field of research, and besides mechanical and optical testing numerous advanced analytical techniques have been employed in this area. In the present work, another means of studying the properties of hair is added by demonstrating the feasibility of magnetic resonance imaging (MRI) of the human hair. Materials and methods  Established dedicated nuclear magnetic resonance microscopy hardware (solenoidal radiofrequency microcoils and planar field gradients) and methods (constant time imaging) were adapted to the specific needs of hair MRI. Results  Images were produced at a spatial resolution high enough to resolve the inner structure of the hair, showing contrast between cortex and medulla. Quantitative evaluation of a scan series with different echo times provided a value of 2.6 ms for the cortex and a water content of about 90% for hairs saturated with water. Conclusion  The demonstration of the feasibility of hair MRI potentially adds a new tool to the large variety of analytical methods used nowadays in the development of hair care products.