Crosslinking and grafting ethylene vinyl acetate copolymer with accelerated electrons in the presence of polyfunctional monomers

In this study, we have studied the effects of polyfunctional monomers (PFMs) on physical properties of ethylene vinyl acetate (EVA) copolymer crosslinked with electron beam (EB) or peroxides. The PFMs used were triallylcyanurate, triallylisocyanurate, trimethylolpropane trimethacrylate, zinc diacrylate, and ethylene glycol dimethacrylate. Using PFMs has led to (1) optimum cure time t ₉₀ decrease from 19′25″ to 17′30″–18′45″, (2) scorch time increase from 2′ to maximum 3′45″, (3) increasing the crosslink density of peroxide or EB-cured systems by increasing the efficiency of productive radical reactions. The most efficient PFM for EVA copolymer blends has been triallylisocyanurate. Tensile strength and tear strength of samples crosslinked with EB for all irradiation doses are significantly better than those obtained for samples crosslinked with peroxides (differences up to 190%). The results show that EB irradiation gave the best results     

Homogeneous nucleation and mesophase formation in glassy isotactic polypropylene

Differential fast scanning chip calorimetry has been employed to study nucleation/ordering during annealing the glass of quenched isotactic polypropylene. Initially non-ordered samples were annealed below the glass transition temperature for different periods of time, and the change of structure during isothermal annealing was then analyzed by monitoring the exchange of latent heat on heating. Primary result of this work is the proof of homogeneous nucleation of ordering and mesophase formation in the glassy state. It is suggested that only local non-cooperative mobility of molecular segments is required to form small, ordered domains, and that the classical nucleation theory, which restricts nucleation of the crystallization/ordering process of polymers to temperatures between the equilibrium melting temperature and the glass transition temperature, needs modification.     

Nanodiamond-mediated crystallization in fibers of PANI nanocomposites produced by template-free polymerization: Conductive and thermal properties of the fibrillar networks

The detonation nanodiamond is a novel versatile nanomaterial with tunable properties and surface chemistry. In this work, we report on a template-free method to synthesize polyaniline based nanocomposite fibers during a chemical oxidative precipitation polymerization where the cooperative interactions between nanodiamond and polyaniline nucleates trigger the final morphology of the nanocomposite. FE–SEM and TEM observations evidence the prominent growth of fibril-like structures assembled in 2-D networks of tightly woven, partially oriented fibers. Optical and Raman spectroscopy and X-ray diffraction analyses reveal that the polymer chains are in a protonated emeraldine form and organize themselves in a highly ordered 3-D spatial arrangement. Conductivity measurements performed on isolated fibers by a conductive tip of an AFM apparatus highlight that the diamond filler does not affect the conductive properties of the polyaniline matrix while increases the thermal stability of the polymer as confirmed by TGA studies.     

Optical properties of hybrid T3Pyr/SiO2/3C-SiC nanowires

A new class of nanostructured hybrid materials is developed by direct grafting of a model thiophene-based organic dye on the surface of 3C-SiC/SiO₂ core/shell nanowires. TEM-EDX analysis reveals that the carbon distribution is more spread than it would be, considering only the SiC core size, suggesting a main contribution from C of the oligothiophene framework. Further, the sulfur signal found along the treated wires is not detected in the as-grown samples. In addition, the fluorescent spectra are similar for the functionalized nanostructures and T3Pyr in solution, confirming homogeneous molecule grafting on the nanowire surface. Chemical and luminescence characterizations confirm a homogeneous functionalization of the nanowires. In particular, the fluorophore retains its optical properties after functionalization.     

Production,Characterization and Synthetic Application of a Purine Nucleoside Phosphorylase from Aeromonas hydrophila

Purine nucleoside phosphorylase (PNP) from Aeromonas hydrophila encoded by the deoD gene has been over‐expressed in Escherichia coli, purified, characterized about its substrate specificity and used for the preparative synthesis of some 6‐substituted purine‐9‐ribosides. Substrate specificity towards natural nucleosides showed that this PNP catalyzes the phosphorolysis of both 6‐oxo‐ and 6‐aminopurine (deoxy)ribonucleosides. A library of nucleoside analogues was synthesized and then submitted to enzymatic phosphorolysis as well. This assay revealed that 1‐, 2‐, 6‐ and 7‐modified nucleosides are accepted as substrates, whereas 8‐substituted nucleosides are not. A few transglycosylation reactions were carried out using 7‐methylguanosine iodide ( 4 ) as a D ‐ribose donor and 6‐substituted purines as acceptor. In particular, following this approach, 2‐amino‐6‐chloropurine‐9‐riboside ( 2c ), 6‐methoxypurine‐9‐riboside ( 2d ) and 2‐amino‐6‐(methylthio)purine‐9‐riboside ( 2g ) were synthesized in very high yield and purity.     

Effects of processing conditions on hybrid filler selective localization,rheological, and thermal properties of poly(ε-caprolactone)/poly(lactic acid) blends

In this study, the effects of processing conditions through different mixing sequences were used to analyze the factors, which could influence the hybrid filler selective localization in an immiscible polymer blend and how localization can influence the rheological and thermal properties. Different selective localizations were observed depending on the mixing sequence used when the hybrid filler was added. Notably, nanoparticles can interact with each other, which favor a synergy between them and alters, besides the localization, the dispersion state, or can interact with one polymer phase, and also alter the nanoparticles' selective localization. An improvement in rheological properties was observed in the hybrid nanocomposite in which there was interaction between the nanoparticles, favoring the hexagonal boron nitride exfoliation. On the other hand, for the storage modulus and degree of crystallinity, the sharpest increase occurred in the hybrid nanocomposite in which the nanoparticles could interact preferably with one polymer phase. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48711.     

Switching azonaphthols containing a side chain with limited flexibility. Part 1. Synthesis and tautomeric properties

A series of azo dyes, possessing amide fragments with restricted flexibility tethered to 4-(phenyldiazenyl)naphthalen-1-ol, was obtained from 1-hydroxy-2-naphthoic acid by subsequent conversion to amides and diazo coupling. It was shown that the position of the tautomeric equilibrium in solution strongly depends on the solvent in both UV and NMR concentration scale. The compounds exist as pure enol forms in chloroform and hydrocarbons, while in polar solvents (acetone, acetonitrile, alcohols) a tautomeric mixture is observed. According to the quantum-chemical calculations the aggregation of the keto tautomer is the possible reason for this shift in the position of the tautomeric equilibrium. To support the theoretical predictions, it was found that from acetone the keto form crystallizes as a dimer with hydrogen bonding between N₁-H in the one molecule and amide CO in the other forming a three-dimensional structure. The importance of the side-chain nitrogen atom on the dimer formation was confirmed by solution and solid state study of 4-(phenyldiazenyl)-2-acetylnaphthalen-1-ol. The results indicate that the new azo-dyes obtained could be suitable candidates for switching and sensing applications in non-polar solvents.     

Comparative performance of carbon nanotube and nanoclay on thermal properties and flammability behavior of amorphous polyamide/SEBS blend

Multiwall carbon nanotubes (CNT) or montmorillonite clay (MMT-30B) were added to a poly(hexamethylene isophthalamide-co-terephthalamine) (an amorphous polyamide - aPA) and styrene-ethylene/butylene-styrene graphitized with maleic anhydride (SEBS) blend, in different concentrations, in order to investigate the morphology, thermal properties and flammability behavior. Different nanoparticle localizations in the phase blend were observed through transmission electronic microscopy. CNT nanoparticles are localized in SEBS phase, and MMT-30B nanoparticles in aPA phase. No significant changes were observed on transition temperatures and thermal stability with both nanoparticle additions. However, a slight increase on storage modulus for clay nanocomposites and a slight reduction for carbon nanotube nanocomposites were observed, due to their different phase localizations. Regarding flammability, CNT nanocomposites showed better performance as a flame retardant when compared to samples with MMT-30B. Although the MMT-30B nanocomposites could not be classified according to the UL-94 criteria, no dripped flaming particles were observed, due to the a char barrier formation on the polymer surface. The CNT nanocomposites were classified according to the UL-94 criteria as V-2. The CNT's selective localization on the SEBS phase decreases its heat-release rate, but no interconnected network structure was formed in the matrix to suppress the dripping flaming particles.     

The Genetic Basis of Primary Myelofibrosis and Its Clinical Relevance

Among classical BCR-ABL-negative myeloproliferative neoplasms (MPN), primary myelofibrosis (PMF) is the most aggressive subtype from a clinical standpoint, posing a great challenge to clinicians. Whilst the biological consequences of the three MPN driver gene mutations (JAK2, CALR, and MPL) have been well described, recent data has shed light on the complex and dynamic structure of PMF, that involves competing disease subclones, sequentially acquired genomic events, mostly in genes that are recurrently mutated in several myeloid neoplasms and in clonal hematopoiesis, and biological interactions between clonal hematopoietic stem cells and abnormal bone marrow niches. These observations may contribute to explain the wide heterogeneity in patients’ clinical presentation and prognosis, and support the recent effort to include molecular information in prognostic scoring systems used for therapeutic decision-making, leading to promising clinical translation. In this review, we aim to address the topic of PMF molecular genetics, focusing on four questions: (1) what is the role of mutations on disease pathogenesis? (2) what is their impact on patients’ clinical phenotype? (3) how do we integrate gene mutations in the risk stratification process? (4) how do we take advantage of molecular genetics when it comes to treatment decisions?     

Genomic Instability Is an Early Event in Aluminium-Induced Tumorigenesis

Genomic instability is generally considered as a hallmark of tumorigenesis and a prerequisite condition for malignant transformation. Aluminium salts are suspected environmental carcinogens that transform mammary epithelial cells in vitro through unknown mechanisms. We report here that long-term culture in the presence of aluminium chloride (AlCl₃) enables HC11 normal mouse mammary epithelial cells to form tumours and metastases when injected into the syngeneic and immunocompetent BALB/cByJ strain. We demonstrate that AlCl₃ rapidly increases chromosomal structural abnormalities in mammary epithelial cells, while we failed to detect direct modulation of specific mRNA pathways. Our observations provide evidence that clastogenic activity—a well-recognized inducer of genomic instability—might account in part for the transforming abilities of aluminium in mammary epithelial cells.