Optimal-tuning PID control of adaptive materials for structural efficiency

The objective of this paper was solving the optimization problem of lightweight stiffened structures modelled as a two-dimensional domain in an efficient computational way. The underlying premise was that mass should be distributed in an efficient way, so as to use a minimum amount of material to accomplish the mechanical function. This premise was expressed as a global, multi-objective optimization problem in which stiffness and mass were conflicting objectives. Alternative local evolution rules were implemented to update mass density or Young’s modulus at each step of the iterative procedure. The solution of the structural optimization problem was accomplished by a novel automatic procedure consisting of two consecutive stages of control and optimization. In the first stage of Proportional Integral Derivative (PID) control gains were manually selected whereas in the second stage the finding of optimal values of control gains, target, and cost indices was allowed. In this study a bone-like material was adopted and a thin slab was analysed as a sample problem.     

Persistent ocean monitoring with underwater gliders: Adapting sampling resolution

Ocean processes are dynamic and complex and occur on multiple spatial and temporal scales. To obtain a synoptic view of such processes, ocean scientists collect data over long time periods. Historically, measurements were continually provided by fixed sensors, e.g., moorings, or gathered from ships. Recently, an increase in the utilization of autonomous underwater vehicles has enabled a more dynamic data acquisition approach. However, we still do not utilize the full capabilities of these vehicles. Here we present algorithms that produce persistent monitoring missions for underwater vehicles by balancing path following accuracy and sampling resolution for a given region of interest, which addresses a pressing need among ocean scientists to efficiently and effectively collect high‐value data. More specifically, this paper proposes a path planning algorithm and a speed control algorithm for underwater gliders, which together give informative trajectories for the glider to persistently monitor a patch of ocean. We optimize a cost function that blends two competing factors: maximize the information value along the path while minimizing deviation from the planned path due to ocean currents. Speed is controlled along the planned path by adjusting the pitch angle of the underwater glider, so that higher resolution samples are collected in areas of higher information value. The resulting paths are closed circuits that can be repeatedly traversed to collect long‐term ocean data in dynamic environments. The algorithms were tested during sea trials on an underwater glider operating off the coast of southern California, as well as in Monterey Bay, California. The experimental results show improvements in both data resolution and path reliability compared to previously executed sampling paths used in the respective regions. © 2011 Wiley Periodicals, Inc.     

Water diffusion in polymer nano-films measured with microcantilevers

We present a method to measure the absorption of water molecules from the liquid and the vapour phase into polymer nano-films and the diffusion inside these films. Film thickness can be down to 45 nm. To demonstrate the possibilities of this method we use polymer films that are deposited on the upper side of a silicon cantilever by plasma polymerization of norbornene. When a microdrop of water is deposited onto the initially straight cantilever, the drop causes the cantilever to bend while it evaporates. Evaporation of such small water drops usually takes less than a second. An upwards bending is due to capillary forces and a downwards bending is due to the diffusion of water into the polymer film – and the consequent volume expansion (swelling) of the film. The magnitude of the capillary forces and the extent of swelling continuously change during drop evaporation. When drop evaporation is over the cantilever returns to its initial straight position. We simulate the time dependent bending with a numerical model that qualitatively agrees with the experiment. From the time dependence of cantilever bending we are able to determine the diffusion coefficient of water in the thin polymer film.     

Vanadia doped tungsten-titania SCR catalysts as functional materials for exhaust gas sensor applications

Urea-SCR systems (selective catalytic reduction) are required to meet future NO_x emission standards of heavy-duty and light-duty vehicles. It is a key factor to control the SCR systems and to monitor the catalysts’ functionalities to achieve low emissions. The novel idea of this study is to apply commercially available SCR catalyst materials based on vanadia-doped tungsten-titania as gas sensing films for impedimetric thick-film exhaust gas sensor devices. The dependence of the impedance on the surrounding gas atmosphere, especially on the concentrations of NH₃ and NO₂, is investigated, as well as cross interferences from other components of the exhaust. The sensors provide a good NH₃ sensitivity at 500 °C. The sensor behavior is explained in light of the literature combining the fields of catalysts and semiconducting gas sensors.     

Selective voltammetric determination of electroactive neuromodulating species in biological samples using iron(II) phthalocyanine modified multi-wall carbon nanotubes paste electrode

Iron(II) phthalocyanine (FePc) modified multi-wall carbon nanotubes paste electrodes (MWCNTPEs) were used as voltammetric sensors to selectively detect dopamine (DA) in the presence of serotonin (5-HT). The electrochemical behavior of DA at the new modified electrode was investigated using CV. The enhanced current response of DA indicates that FePc modification of the MWCNTPE surface results in a high catalytic activity for the redox reaction of DA. Differential pulse voltammetry was applied in detection of DA and 5-HT at FePc-MWCNTPE. The method parameters were optimized. Detection limit of 2.05 × 10⁻⁷ M was obtained for DA by using the electrocatalytic oxidation signal corresponding to the Fe^II/Fe^III redox process. The separation between the peak potentials of DA and 5-HT is 170 mV which is large enough for the simultaneously, selective determination of the two chemical species in their mixtures. There was no electrochemical response for ascorbic acid (AA) added in the sample. The monoamine neurotransmitter measuring method has been tested in analyzing deproteinized serum samples.     

Indoor robot gardening: design and implementation

This paper describes the architecture and implementation of a distributed autonomous gardening system with applications in urban/indoor precision agriculture. The garden is a mesh network of robots and plants. The gardening robots are mobile manipulators with an eye-in-hand camera. They are capable of locating plants in the garden, watering them, and locating and grasping fruit. The plants are potted cherry tomatoes enhanced with sensors and computation to monitor their well-being (e.g. soil humidity, state of fruits) and with networking to communicate servicing requests to the robots. By embedding sensing, computation, and communication into the pots, task allocation in the system is de-centrally coordinated, which makes the system scalable and robust against the failure of a centralized agent. We describe the architecture of this system and present experimental results for navigation, object recognition, and manipulation as well as challenges that lie ahead toward autonomous precision agriculture with multi-robot teams.     

Rule-based tools for the configuration of ambient intelligence systems: a comparative user study

Multimedia Tools and Applications - This paper describes a 63-participant user study that compares two widely known systems supporting end users in creating trigger-action rules for the Internet of...     

Managing the requirements flow from strategy to release in large-scale agile development: a case study at Ericsson

In a large organization, informal communication and simple backlogs are not sufficient for the management of requirements and development work. Many large organizations are struggling to successfully adopt agile methods, but there is still little scientific knowledge on requirements management in large-scale agile development organizations. We present an in-depth study of an Ericsson telecommunications node development organization which employs a large scale agile method to develop telecommunications system software. We describe how the requirements flow from strategy to release, and related benefits and problems. Data was collected by 43 interviews, which were analyzed qualitatively. The requirements management was done in three different processes, each of which had a different process model, purpose and planning horizon. The release project management process was plan-driven, feature development process was continuous and implementation management process was agile. The perceived benefits included reduced development lead time, increased flexibility, increased planning efficiency, increased developer motivation and improved communication effectiveness. The recognized problems included difficulties in balancing planning effort, overcommitment, insufficient understanding of the development team autonomy, defining the product owner role, balancing team specialization, organizing system-level work and growing technical debt. The study indicates that agile development methods can be successfully employed in organizations where the higher level planning processes are not agile. Combining agile methods with a flexible feature development process can bring many benefits, but large-scale software development seems to require specialist roles and significant coordination effort.     

An efficient deconvolution algorithm for estimating oxygen consumption during muscle activities

The reconstruction of an unknown input function from noisy measurements in a biological system is an ill-posed inverse problem. Any computational algorithm for its solution must use some kind of regularization technique to neutralize the disastrous effects of amplified noise components on the computed solution. In this paper, following a hierarchical Bayesian statistical inversion approach, we seek estimates for the input function and regularization parameter (hyperparameter) that maximize the posterior probability density function. We solve the maximization problem simultaneously for all unknowns, hyperparameter included, by a suitably chosen quasi-Newton method. The optimization approach is compared to the sampling-based Bayesian approach. We demonstrate the efficiency and robustness of the deconvolution algorithm by applying it to reconstructing the time courses of mitochondrial oxygen consumption during muscle state transitions (e.g., from resting state to contraction and recovery), from the simulated noisy output of oxygen concentration dynamics on the muscle surface. The model of oxygen transport and metabolism in skeletal muscle assumes an in vitro cylindrical structure of the muscle in which the oxygen from the surrounding oxygenated solution diffuses into the muscle and is then consumed by the muscle mitochondria. The algorithm can be applied to other deconvolution problems by suitably replacing the forward model of the system.