Nonlinear Absorption of Submicrometer Grain‐Size Cobalt‐Doped Magnesium Aluminate Transparent Ceramics

Transparent cobalt‐doped magnesium aluminate spinel (Co:MgAl₂O₄) ceramics with a submicrometer grain size were prepared by spark plasma sintering. For the first time, the nonlinear absorption of Co:MgAl₂O₄ transparent ceramics was experimentally demonstrated. Both ground state absorption (σ_GSA) and excited state absorption (σ_ESA) were estimated using the solid‐state slow saturable absorber model based on absorption saturation measurements performed at 1.535 μm. σ_GSA and σ_ESA for 0.03 at.% Co:MgAl₂O₄ were found to be 4.1 × 10^?19 cm² and 4.0 × 10^?20 cm², respectively. In the case of 0.06 at.% Co:MgAl₂O₄ ceramics, σ_GSA = 2.6 × 10^?19 cm² and σ_ESA= 5.3 × 10^?20 cm² were determined.     

Influence of Nb5+ ions on phase transitions and polar disorder above TC in PbZrO3 studied by Raman spectroscopy

Micro-Raman light scattering experiments on PbZrO₃ (PZO) single crystal doped with Nb⁵⁺ have been investigated. Special attention was paid to the paraelectric (PE) phase in which nominally forbidden first-order Raman spectra were detected at temperatures far above the phase transition T_C. Complex Raman spectra were observed in the vicinity of three structural phase transitions. These results mainly from the coexistence of phases with different symmetries in a wide temperature range below T_C. The Raman measurements have been compared with dielectric and optical observations and proved that polar nanoregions in a centrosymmetric lattice appear well above T_C. It was shown that doping ABO₃ perovskites with heterovalent ions like Nb⁵⁺ unbalances charge neutrality of the lattice and strongly extends the temperature range of polar regions. The investigations performed point out that in the PE matrix the interaction between electrons and lattice vibrations, as recently suggested for pure PZO, plays an important role.     

Novel Positive Allosteric Modulators of µ Opioid Receptor—Insight from In Silico and In Vivo Studies

Opioids are the drugs of choice in severe pain management. Unfortunately, their use involves serious, potentially lethal side effects. Therefore, efforts in opioid drug design turn toward safer and more effective mechanisms, including allosteric modulation. In this study, molecular dynamics simulations in silico and ‘writhing’ tests in vivo were used to characterize potential allosteric mechanism of two previously reported compounds. The results suggest that investigated compounds bind to μ opioid receptor in an allosteric site, augmenting action of morphine at subeffective doses, and exerting antinociceptive effect alone at higher doses. Detailed analysis of in silico calculations suggests that first of the compounds behaves more like allosteric agonist, while the second compound acts mainly as a positive allosteric modulator.     

Genetic Carriers and Genomic Distribution of cadA6—A Novel Variant of a Cadmium Resistance Determinant Identified in Listeria spp.

Listeria monocytogenes is a pathogen responsible for severe cases of food poisoning. Listeria spp. strains occurring in soil and water environments may serve as a reservoir of resistance determinants for pathogenic L. monocytogenes strains. A large collection of Listeria spp. strains (155) isolated from natural, agricultural, and urban areas was screened for resistance to heavy metals and metalloids, and the presence of resistance determinants and extrachromosomal replicons. Of the tested strains, 35% were resistant to cadmium and 17% to arsenic. Sequence analysis of resistance plasmids isolated from strains of Listeria seeligeri and Listeria ivanovii, and the chromosome of L. seeligeri strain Sr73, identified a novel variant of the cadAC cadmium resistance efflux system, cadA6, that was functional in L. monocytogenes cells. The cadA6 cassette was detected in four Listeria species, including strains of L. monocytogenes, isolated from various countries and sources—environmental, food-associated, and clinical samples. This resistance cassette is harbored by four novel composite or non-composite transposons, which increases its potential for horizontal transmission. Since some cadAC cassettes may influence virulence and biofilm formation, it is important to monitor their presence in Listeria spp. strains inhabiting different environments.     

The Use of Reverse Osmosis in the Removal of PAHs from Municipal Landfill Leachate

Polycyclic aromatic hydrocarbons (PAHs) are relatively well-known organic pollutants and due to their carcinogenic and mutagenic properties their presence in the environment still attracts a lot of attention.

According to literature reports and own research, PAHs presence in wastewaters is common. It was confirmed that PAHs are the components of municipal landfill leachate. Membrane techniques are one of the most interesting ways of removing PAHs from leachate.

The purpose of this article is to monitor PAHs concentration changes during the membrane (reverse osmosis - RO) leachate treatment processes. In the first stage of testing leachates were filtrated on the sand bed (pre-filtration). After the pre-filtration they were directed to the membrane module for the main filtration.

Sixteen PAHs listed by EPA were analyzed. The results with information on PAHs concentration in leachate samples were presented using HPLC with fluorescence detection (FLD). The changes in PAHs concentration were determined in leachate samples before and after pre-filtration as well as after RO. The decrease of PAHs concentration in the samples was observed after these processes. The total concentration of 16 PAHs in raw municipal landfill leachates amounted to 23.64–26.95 μg/L. The research confirmed the high efficiency in removal of PAHs while using a reverse osmosis (59–72%). Including the pre-filtration, the overall level of removed PAHs reached 81–86%. The average PAHs concentration after pre-filtration and RO was in the 4.46–4.99 μg/L range. The municipal landfill leachate with a high concentration of PAHs should be cleaned before it is discharged into the environment.     

First step of anodization influences the final nanopore arrangement in anodized alumina

Anodic porous alumina is a well-known template material for nanofabrication. To obtain highly ordered nanoporous array, sophisticated and expensive methods are applied. On the other hand there is two-step self organized anodization, which is much cheaper, but obtained alumina arrangement is not ideal. In our paper, influence of the first step of anodization on the final AAO structure arrangement is studied in details. Anodizations were carried out in 0.3 M oxalic acid at 35 °C at various potentials and durations of the first step of anodization. Second step of the anodization was constant for all the experiments and was 15 min long. Oxide layer thickness formed during the first step of the anodization was 50, 100, 150 and 200 μm and after oxide removal, remaining concaves were serving as a mask for further growth during second step of the anodization. The longer first step of anodization, the higher regularity ratio and circularity, and lower percentage of defects in the nanoporous array. Anodic porous alumina was formed at four various potentials: 30, 40, 50, 60 V. The best arrangement of nanopores was found for samples anodized at 40 V. Maximum of regularity ratio was corresponding to the minimum of defect content in the AAO array. Long enough first step of two-step self-organized anodization in 0.3 M oxalic acid can provide high-ordered nanoporous template for fabrication of various nanomaterials with new, unique properties.     

Hydrodynamics and heat transfer in bubbly flow in the turbulent boundary layer

In the work presented is a new approach to modelling the bubbly flow in the boundary layer. The approach is based on summation of dissipation energy coming from the shearing turbulent flow in the absence of bubbles and the dissipation contribution from the presence of bubbles. As a result we obtain the dissipation of equivalent single phase turbulent flow. The model has been solved using the method of asymptotic correction to provide an explicit differential equation describing the velocity profile. That can be solved with the assumption of constant void fraction distribution to yield the analytical velocity profile. Alternatively, author has developed his own model of lateral void migration, which is distinct from other models by virtue of presence of another rotational velocity. Velocity distributions calculated using the new model have been compared against the experimental data of turbulent bubble flows with small void fraction. A good consistency between calculations performed using a new model and available experimental data has been obtained. Additionally, a solution of the temperature field is also given. In the case of a constant void fraction distribution analytical distribution of the Nusselt number is given or the set of differential equations needs to be solved.     

Mechanical and Tribological Properties of Thin Remote Microwave Plasma CVD a-Si:N:C Films from a Single-Source Precursor

Silicon carbonitride (a-Si:N:C) films produced by remote plasma chemical vapor deposition (RP-CVD) were investigated. Tetramethyldisilazane as a single-source precursor and (H₂+N₂) upstream gas mixture for plasma generation were used. The influence of the upstream gas composition on the structure, density, mechanical and tribological properties of the films deposited on p-type Si (001) wafers (both heated—T _s =300°C and unheated—T _s =30°C) are reported. The H₂ RP-CVD process was found to result in the formation of outstanding low friction (0.04) and high hardness (H=27-31 GPa) a-Si:N:C films exhibiting promisingly high H/E values.