Highly coherent electronically tunable waveguide extended cavity diode laser

A frequency agile extended cavity diode laser using an integrated Bragg reflector in a Ti : Fe : LiNbO/sub 3/ waveguide is developed and characterized. The laser emits up to 7 mW in the 1.5-/spl mu/m telecommunication window. The emission spectrum exhibits a 18-kHz linewidth, >40-dB sidemode suppression ratio, and a wavelength stability of /spl plusmn/1 pm over hours. Very fast mode hop-free frequency tuning is achieved through the electrooptic effect, with a tuning slope of 55.5 MHz/V.     

Development of Optical Code Division Multiple Access Based System Using Spectral Amplitude Coding via Fiber Bragg Gratings (FBGs)

Wireless Personal Communications - The multiple user’s based transmission systems are developed in the past using various multiple access techniques for fibre optic communications. Among...     

High Precision,Electrochemical Detection of Reversible Binding of Recombinant Proteins on Wide Bandgap GaN Electrodes Functionalized with Biomembrane Models

We report a novel hybrid charge sensor realized by the deposition of phospholipid monolayers on highly doped n‐GaN electrodes. To detect the binding of recombinant proteins with histidine‐tags, lipid vesicles containing chelator lipids were deposited on GaN electrodes pre‐coated with octadecyltrimethoxysilane monolayers. Owing to its optical transparency, GaN allows the confirmation of the fluidity of supported membranes by fluorescence recovery after photo‐bleaching (FRAP). The electrolyte‐(organic) insulator‐semiconductor (EIS) setup enables one to transduce variations in the surface charge density ΔQ into a change in the interface capacitance ΔC _p and, thus, the flat‐band potential ΔU _FB. The obtained results demonstrate that the membrane‐based charge sensor can reach a high sensitivity to detect reversible changes in the surface charge density on the membranes by the formation of chelator complexes, docking of eGFP with histidine tags, and cancellation by EDTA. The achievable resolution of ΔQ ≥ 0.1 μC/cm² is better than that obtained for membrane‐functionalized p‐GaAs, 0.9 μC/cm², and for ITO coated with a polymer supported lipid monolayer, 2.2 μC/cm². Moreover, we examined the potential application of optically active InGaN/GaN quantum dot structures, for the detection of changes in the surface potential from the photoluminescence signals measured at room temperature.     

Design of efficient lightweight strategies to combat DoS attack in delay tolerant network routing

Delay tolerant networks (DTNs) are characterized by delay and intermittent connectivity. Satisfactory network functioning in a DTN relies heavily on co-ordination among participating nodes. However, in practice, such co-ordination cannot be taken for granted due to possible misbehaviour by relay nodes. Routing in a DTN is, therefore, vulnerable to various attacks, which adversely affect network performance. Several strategies have been proposed in the literature to alleviate such vulnerabilities—they vary widely in terms of throughput, detection time, overhead etc. One key challenge is to arrive at a tradeoff between detection time and overhead. We observe that the existing table-based reactive strategies to combat Denial-of-service (DoS) attacks in DTN suffer from two major drawbacks: high overhead and slow detection. In this paper, we propose three secure, light-weight and time-efficient routing algorithms for detecting DoS attacks (Blackhole and Grey-hole attacks) in the Spray & Focus routing protocol. The proposed algorithms are based on use of a small fraction of privileged (trusted) nodes. The first strategy, called TN, outperforms the existing table-based strategy with 20–30 % lesser detection time, 20–25 % higher malicious node detection and negligible overhead. The other two strategies, CTN_MI and CTN_RF explore the novel idea that trusted nodes are able to utilize each others’ information/experience using their long range connectivity as and when available. Simulations performed using an enhanced ONE simulator reveals that investing in enabling connectivity among trusted nodes (as in CTN_RF) can have significant performance benefits.     

Iron-Doped,Mullite-Impregnated PVDF Composite: An Alternative Separator for a High Charge Storage Ceramic Capacitor

In this communication, the formation mechanism of the electroactive β phase, morphology and the dielectric activities of increasing doping concentration (0–1.2 M.W % of mullite) of Fe²⁺ ion-doped, mullite-impregnated polyvinylidene fluoride (PVDF) nanocomposite have been investigated. Differential thermal analysis (DTA) confirms the formation of an electroactive β phase, and Fourier transform infrared spectroscopy (FTIR) showed that the β phase increases simultaneously and attains the maximum increment of 2.6 times compared to pristine PVDF. X-ray diffraction (XRD) spectra also agreed well with the β-phase increment behaviour and also confirmed the presence of required mullite phases. Field emission scanning electron microscopy (FESEM) images indicate the strong interaction between the polymer matrix and different concentrations of Fe²⁺ ion-doped mullite particles, resulting in enhanced electroactive β phase formation and large dielectric constant of the nanocomposite films followed by significant low dielectric loss with high ac conductivity compared to pristine PVDF films at room temperature. This doped polymer composite can be used as a high dielectric separator and, using this separator, we have successfully fabricated a high-charge-storage device. This paper also demonstrates that the loading of conductive Fe²⁺ ions within the highly insulating mullite matrix has a critical concentration for the enhancement and nucleation of the electroactive β phase of the PVDF polymer. In this critical concentration, the highest formation of a β network and maximum numbers of homogeneously distributed iron-doped mullite (FeM) particles in PVDF matrix improves the effective interfacial polarization by Maxwell–Wagner–Sillar (MWS) polarization effect which is responsible for the enhancement of dielectric constant and ac conductivity followed by significant tangent loss. So, it can be concluded that the incorporation of Fe²⁺-doped mullite into PVDF matrix is an effective way to fabricate a high dielectric separator of high-charge-storage electronic devices.     

Noncoherent MMSE multiuser receivers and their blind adaptiveimplementations

Three noncoherent minimum mean-squared error (NMSE)-based multiuser receivers are proposed for multipulse modulation. These receivers have a common MMSE prefilter and are followed by one of three phase-independent decision rules. The simplest decision rule selects the maximum magnitude of the MMSE filter outputs, and the other two account for the second-order statistics of the residual multiple-access interference that remains after MMSE filtering. Blind adaptive algorithms are then proposed for the three noncoherent MMSE receivers. The common adaptive algorithm for the MMSE prefilter, which is based on the stochastic approximation method, is shown to converge in the mean-squared error sense to the nonblind NMSE prefilter. Our convergence analysis yields new insight into the tradeoff between the rate of convergence and the residual mean-squared error. The noncoherent blind receivers obtained here do not require the knowledge of the received signals of any of the interfering users, and are hence well-suited for distributed implementation in cellular wireless networks or in communication systems that must operate in noncooperative environments     

A model for the performance analysis and design of waveguide p-i-n photodetectors

A model to investigate the frequency response of waveguide (WG) p-i-n photodetectors (PDs) is presented. The model is based on the 2-D position-dependent distribution of carriers in the device and the results show that the contribution to the total current mainly comes from a small length of the PD measured from its input end. The effect of carrier trapping at a heterointerface has also been considered to study the frequency dependence of the photocurrent at low-bias voltages. The frequency response and bandwidth obtained from the model are in good agreement with published experimental results. A simplified and approximate relation for the fiber-to-WG coupling efficiency has also been used to calculate the overall quantum-efficiency of WGPDs. Then, the effect of WG geometry on the bandwidth-quantum efficiency product has been analyzed and some results on the optimum design of a WG p-i-n PD for maximum bandwidth-quantum efficiency product have been tabulated.     

Mobility management for VoIP service: Mobile IP vs. SIP

Wireless Internet access has gained significant attention as wireless/mobile communications and networking become widespread. The voice over IP service is likely to play a key role in the convergence of IP-based Internet and mobile cellular networks. We explore different mobility management schemes from the perspective of VoIP services, with a focus on Mobile IP and session initiation protocol. After illustrating the signaling message flows in these two protocols for diverse cases of mobility management, we propose a shadow registration concept to reduce the interdomain handoff (macro-mobility) delay in the VoIP service in mobile environments. We also analytically compute and compare the delay and disruption time for exchanging signaling messages associated with the Mobile IP and SIP-based solutions.     

High extinction, broadband polarisers using long-period fibre gratings in few-mode fibres

Long-period fibre gratings in specially designed birefringent few-mode fibres are used to demonstrate spectrally flat polarisers with bandwidths of 10 nm and polarisation extinction levels of 20 dB. This is enabled by the special dispersive properties of few-mode fibres, yielding fibre polarisers with performance approaching that of bulk-optic devices.