Improving the Pressurized Flushing Efficiency in Reservoirs: an Experimental Study

Sediment flushing in many reservoirs of the world is accomplished with low efficiency. In this study, a new configuration was proposed for reservoir bottom outlet to increase the pressurized flushing efficiency. In the new configuration, a projecting semi-circular structure was connected to the upstream edge of bottom outlet. It was observed that by employing the projecting bottom outlet, the sediment removal efficiency increased significantly compared to the flushing via typical bottom outlet. In the case of new-configuration bottom outlet with L _sc /D _outlet  = 5.26 and D _sc /D _outlet  = 1.32, the dimensionless length, width and depth of flushing cone increased 280%, 45% and 14%, respectively, compared to the reference test. The proposed structure can ensure the sustainable use of reservoirs.     

Participatory Modeling Workshops in a Water-Stressed Basin Result in Gains in Modeling Capacity but Reveal Disparity in Water Resources Management Priorities

Participatory modeling workshops were held in Sonora, México, with the goal of developing water resources management strategies in a water-stressed basin. A model of the water resources system, consisting of watershed hydrology, water resources infrastructure, and groundwater models, was developed deliberatively in the workshops, along with scenarios of future climate and development. Participants used the final version of the water resources systems model to select management strategies. The performance of the strategies was based on the reliability of meeting current and future demands at a daily time scale over a year’s period. Pre- and post-workshop surveys were developed and administered. The survey questions focused on evaluation of participants’ modeling capacity and the utility and accuracy of the models. The selected water resources strategies and the associated, expected reliability varied widely among participants. Most participants could be clustered into three groups with roughly equal numbers of participants that varied in terms of reliance on expanding infrastructure vs. demand modification; expectations of reliability; and perceptions of social, environmental, and economic impacts. The wide range of strategies chosen and associated reliabilities indicate that there is a substantial degree of uncertainty in how future water resources decisions could be made in the region. The pre- and post-survey results indicate that participants believed their modeling abilities increased and beliefs in the utility of models increased as a result of the workshops.     

Ecosystem Service Impacts of Urban Water Supply and Demand Management

Utilities face the challenge of enhancing long-term water security while minimising undesirable economic, social and environmental impacts of supply and demand management options. This paper provides an example of how the ecosystem services concept can be used to enumerate and organise broad impacts of water supply options. A case study of Adelaide, South Australia, is used to examine costs and benefits associated with different sources of water and source-water mix scenarios. Ecosystem service impacts are estimated using estimates from the literature. Seven water supply and demand management options are considered for Adelaide: 1) the River Murray, 2) Mt. Lofty Ranges catchments, 3) wastewater reuse, 4) desalination, 5) stormwater harvesting, 6) groundwater and 7) water conservation. The largest costs are associated with sourcing water from conservation measures such as water restrictions on outdoor watering estimated at $1.87/kL. Salinity damage costs associated with residential uses are estimated at up to $1.54/kL. Salinity damage costs of wastewater reuse were estimated at $1.16/kL. The largest benefit is coastal amenity services associated with stormwater harvesting and treatment estimated at $1.03/kL. Results show that there is a trade-off between financial costs and ecosystem services impacts with source-water mix scenarios with the highest ecosystem services cost having the lowest financial O&M cost and vice versa. This highlights the importance of taking ecosystem services into account when evaluating water supply options.     

Continuous-time norm-constrained Kalman filtering

This paper considers continuous-time state estimation when part of the state estimate or the entire state estimate is norm-constrained. In the former case continuous-time state estimation is considered by posing a constrained optimization problem. The optimization problem can be broken up into two separate optimization problems, one which solves for the optimal observer gain associated with the unconstrained state estimates, while the other solves for the optimal observer gain associated with the constrained state estimates. The optimal constrained state estimate is found by projecting the time derivative of an unconstrained estimate onto the tangent space associated with the norm constraint. The special case where the entire state estimate is norm-constrained is briefly discussed. The utility of the filtering results developed are highlighted through a spacecraft attitude estimation example. Numerical simulation results are included.     

A new approach to the epsilon expansion of generalized hypergeometric functions

Assuming that the parameters of a generalized hypergeometric function depend linearly on a small variable ε$\epsilon$, the successive derivatives of the function with respect to that small variable are evaluated at ε=0$\epsilon =0$ to obtain the coefficients of the ε$\epsilon$-expansion of the function. The procedure, which is quite naive, benefits from simple explicit expressions of the derivatives, to any order, of the Pochhammer and reciprocal Pochhammer symbols with respect to their argument. The algorithm may be used algebraically, irrespective of the values of the parameters. It reproduces the exact results obtained by other authors in cases of especially simple parameters. Implemented numerically, the procedure improves considerably, for higher orders in ε$\epsilon$, the numerical expansions given by other methods.     

In Situ Processing of Silicon Carbide Layer Structures

A novel route to low-cost processing of silicon carbide (SiC) layer structures is desribed. The processing involves pressureless liquid-phase cosintering of compacted power layers of SiC, containing alumina (Al₂O₃) and yttria (Y₂O₃ sintering additives to yield and yttrium aluminum garnet (YAG) second phase. By adjusting the β:α SiC phase ratios in the individual starting powders, alternate layers with distinctively different microstructures are produced: (i) "homogeneous" microstructures, with fine equiaxed SiC grains, designed for high strength; and (ii) "heterogeneous: microstructures with coarse and elongate SiC grains, designed for high toughness. By virtue of the common SiC and YAG phases, the interlayer interfaces are chemically compatible and strongly bonded. Exploratory Hertzian indetation tests across a bilayer interface confirm the capacity of the tough heterogeneous layer to inhibit potentially dangerous cracks propagating through the homogeneous layer. The potential for application of this novel processing approach to other layer architectures and other ceramic systems is considered.     

Numerical characterization and experimental verification of an in-plane MEMS-actuator with thin-film aluminum heater

In this paper, a novel concept of a thermo-mechanical MEMS actuator using aluminum thin-film heaters on a thermal oxide for electrical insulation is presented. The actuator is part of an universal tensile testing platform for thermo-mechanical material characterization of one dimensional materials on a micro- and nano-scopic scale under different environmental conditions, as varying temperatures, pressure, moisture or even vacuum and is realised in BDRIE technology. It is shown, that the actuator concept fulfills the requirements for the use in a tensile loading stage along with heterogeneously integrated nanofunctional elements, following a specimen centered approach in line with bottom-up self-assembly processes. Simulation and experiment agree very well in the thermal and mechanical domain and allow subsequent optimisation of the actuator performance.     

Multi-body structural effects on the head-disk interface during operational shocks in hard disk drives

Over the past decades, there has been an increase in the demand for hard disk drives (HDDs) used in mobile computing devices. The work performance of a HDD mainly depends on its ability to withstand external disturbances in such applications. Studies of the HDD’s responses and failures during external shocks can be very beneficial for improving the HDD’s designs. Multi-body operational shock (op-shock) models are developed to study the HDDs’ responses during external shocks. Four models which include different components (a disk, a spindle motor, a base plate, a pivot and a head actuator assembly) are introduced in this study to investigate the effects of various components on the drives’ operating performance. It is found that the models must include certain critical components in order to give results for performance reliability when subjected to operational shocks.     

Measurement of Crack Tip Displacement Fields in Mixed Mode I–Mode III Fracture

A new method has been devised to propagate stable subcritical mixed mode I–mode III cracks in soda–lime–silicate and borosilicate glasses. The mode I content was measured using an original optical tunneling technique and mode III content via multiple-beam interferometry. Measurement of the mode III displacement field allows values of mode III fracture toughness, K_III, to be derived. K_III vs crack velocity (v) diagrams have been constructed for both glasses, and, in the case of the soda–lime–silicate glass, v vs K_III relationships have been determined for a variety of humidities. Comparison has been made with published K_I vs v data for this glass.