Ecosystem Service Impacts of Urban Water Supply and Demand Management

Utilities face the challenge of enhancing long-term water security while minimising undesirable economic, social and environmental impacts of supply and demand management options. This paper provides an example of how the ecosystem services concept can be used to enumerate and organise broad impacts of water supply options. A case study of Adelaide, South Australia, is used to examine costs and benefits associated with different sources of water and source-water mix scenarios. Ecosystem service impacts are estimated using estimates from the literature. Seven water supply and demand management options are considered for Adelaide: 1) the River Murray, 2) Mt. Lofty Ranges catchments, 3) wastewater reuse, 4) desalination, 5) stormwater harvesting, 6) groundwater and 7) water conservation. The largest costs are associated with sourcing water from conservation measures such as water restrictions on outdoor watering estimated at $1.87/kL. Salinity damage costs associated with residential uses are estimated at up to $1.54/kL. Salinity damage costs of wastewater reuse were estimated at $1.16/kL. The largest benefit is coastal amenity services associated with stormwater harvesting and treatment estimated at $1.03/kL. Results show that there is a trade-off between financial costs and ecosystem services impacts with source-water mix scenarios with the highest ecosystem services cost having the lowest financial O&M cost and vice versa. This highlights the importance of taking ecosystem services into account when evaluating water supply options.     

Continuous-time norm-constrained Kalman filtering

This paper considers continuous-time state estimation when part of the state estimate or the entire state estimate is norm-constrained. In the former case continuous-time state estimation is considered by posing a constrained optimization problem. The optimization problem can be broken up into two separate optimization problems, one which solves for the optimal observer gain associated with the unconstrained state estimates, while the other solves for the optimal observer gain associated with the constrained state estimates. The optimal constrained state estimate is found by projecting the time derivative of an unconstrained estimate onto the tangent space associated with the norm constraint. The special case where the entire state estimate is norm-constrained is briefly discussed. The utility of the filtering results developed are highlighted through a spacecraft attitude estimation example. Numerical simulation results are included.     

A new approach to the epsilon expansion of generalized hypergeometric functions

Assuming that the parameters of a generalized hypergeometric function depend linearly on a small variable ε$\epsilon$, the successive derivatives of the function with respect to that small variable are evaluated at ε=0$\epsilon =0$ to obtain the coefficients of the ε$\epsilon$-expansion of the function. The procedure, which is quite naive, benefits from simple explicit expressions of the derivatives, to any order, of the Pochhammer and reciprocal Pochhammer symbols with respect to their argument. The algorithm may be used algebraically, irrespective of the values of the parameters. It reproduces the exact results obtained by other authors in cases of especially simple parameters. Implemented numerically, the procedure improves considerably, for higher orders in ε$\epsilon$, the numerical expansions given by other methods.     

In Situ Processing of Silicon Carbide Layer Structures

A novel route to low-cost processing of silicon carbide (SiC) layer structures is desribed. The processing involves pressureless liquid-phase cosintering of compacted power layers of SiC, containing alumina (Al₂O₃) and yttria (Y₂O₃ sintering additives to yield and yttrium aluminum garnet (YAG) second phase. By adjusting the β:α SiC phase ratios in the individual starting powders, alternate layers with distinctively different microstructures are produced: (i) "homogeneous" microstructures, with fine equiaxed SiC grains, designed for high strength; and (ii) "heterogeneous: microstructures with coarse and elongate SiC grains, designed for high toughness. By virtue of the common SiC and YAG phases, the interlayer interfaces are chemically compatible and strongly bonded. Exploratory Hertzian indetation tests across a bilayer interface confirm the capacity of the tough heterogeneous layer to inhibit potentially dangerous cracks propagating through the homogeneous layer. The potential for application of this novel processing approach to other layer architectures and other ceramic systems is considered.     

Numerical characterization and experimental verification of an in-plane MEMS-actuator with thin-film aluminum heater

In this paper, a novel concept of a thermo-mechanical MEMS actuator using aluminum thin-film heaters on a thermal oxide for electrical insulation is presented. The actuator is part of an universal tensile testing platform for thermo-mechanical material characterization of one dimensional materials on a micro- and nano-scopic scale under different environmental conditions, as varying temperatures, pressure, moisture or even vacuum and is realised in BDRIE technology. It is shown, that the actuator concept fulfills the requirements for the use in a tensile loading stage along with heterogeneously integrated nanofunctional elements, following a specimen centered approach in line with bottom-up self-assembly processes. Simulation and experiment agree very well in the thermal and mechanical domain and allow subsequent optimisation of the actuator performance.     

Multi-body structural effects on the head-disk interface during operational shocks in hard disk drives

Over the past decades, there has been an increase in the demand for hard disk drives (HDDs) used in mobile computing devices. The work performance of a HDD mainly depends on its ability to withstand external disturbances in such applications. Studies of the HDD’s responses and failures during external shocks can be very beneficial for improving the HDD’s designs. Multi-body operational shock (op-shock) models are developed to study the HDDs’ responses during external shocks. Four models which include different components (a disk, a spindle motor, a base plate, a pivot and a head actuator assembly) are introduced in this study to investigate the effects of various components on the drives’ operating performance. It is found that the models must include certain critical components in order to give results for performance reliability when subjected to operational shocks.     

Measurement of Crack Tip Displacement Fields in Mixed Mode I–Mode III Fracture

A new method has been devised to propagate stable subcritical mixed mode I–mode III cracks in soda–lime–silicate and borosilicate glasses. The mode I content was measured using an original optical tunneling technique and mode III content via multiple-beam interferometry. Measurement of the mode III displacement field allows values of mode III fracture toughness, K_III, to be derived. K_III vs crack velocity (v) diagrams have been constructed for both glasses, and, in the case of the soda–lime–silicate glass, v vs K_III relationships have been determined for a variety of humidities. Comparison has been made with published K_I vs v data for this glass.     

Detecting Fixed Patterns in Chordal Graphs in Polynomial Time

The Contractibility problem takes as input two graphs G and H, and the task is to decide whether H can be obtained from G by a sequence of edge contractions. The Induced Minor and Induced Topological Minor problems are similar, but the first allows both edge contractions and vertex deletions, whereas the latter allows only vertex deletions and vertex dissolutions. All three problems are NP-complete, even for certain fixed graphs H. We show that these problems can be solved in polynomial time for every fixed H when the input graph G is chordal. Our results can be considered tight, since these problems are known to be W[1]-hard on chordal graphs when parameterized by the size of H. To solve Contractibility and Induced Minor, we define and use a generalization of the classic Disjoint Paths problem, where we require the vertices of each of the k paths to be chosen from a specified set. We prove that this variant is NP-complete even when k=2, but that it is polynomial-time solvable on chordal graphs for every fixed k. Our algorithm for Induced Topological Minor is based on another generalization of Disjoint Paths called Induced Disjoint Paths, where the vertices from different paths may no longer be adjacent. We show that this problem, which is known to be NP-complete when k=2, can be solved in polynomial time on chordal graphs even when k is part of the input. Our results fit into the general framework of graph containment problems, where the aim is to decide whether a graph can be modified into another graph by a sequence of specified graph operations. Allowing combinations of the four well-known operations edge deletion, edge contraction, vertex deletion, and vertex dissolution results in the following ten containment relations: (induced) minor, (induced) topological minor, (induced) subgraph, (induced) spanning subgraph, dissolution, and contraction. Our results, combined with existing results, settle the complexity of each of the ten corresponding containment problems on chordal graphs.     

Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings

Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 13–14, 2004 in Philadelphia, PA.