Studies of the influence of alloying elements on the growth of ferrite from austenite under decarburization conditions: Fe-C-Nl alloys

We have evaluated controlled decarburization as a method for probing the effect of alloying elements on ferrite growth from austenite. The technique permits the exploration of longer-time ferrite layer growth; it minimizes the effects of interface structure on ferrite growth; and it permits the isolation of the effects of temperature and alloying element concentration on ferrite/austenite interface motion. The study of the decarburization of initially homogeneous Fe-C-Ni alloys was complemented by experiments using specimens with a controlled nickel concentration gradient. Although the decarburization method yields consistent results at longer times, it is found to be less appropriate for the study of initial ferrite growth. Nucleation in the gas/solid interface region, coupled with uncertainties about the precise time of decarburization, leads to large relative errors at the earliest times. For these reasons, the method is considered a valuable complement to studies based on precipitation boundary conditions. This article is based on a presentation given in the symposium “The Effects of Alloying Elements on the Gamma to Alpha Transformation in Steels,” October 6, 2002, at the TMS Fall Meeting in Columbus, Ohio, under the auspices of the McMaster Centre for Steel Research and the TMS-ASM Phase Transformations Committee.     

Choice With Initial and Terminal Link Reinforcement: An Alternative Self-Control Paradigm.

Self-control is demonstrated when a less desirable immediate outcome is chosen to ensure a substantially better future. In a novel animal analogue of this situation, primary reinforcement was delivered in both the initial and terminal links of a concurrent chain schedule. Rats made initial link choices between equal amounts of ethanol-free or ethanol-containing milk. Choosing the ethanol-free reinforcer resulted in delivery of the larger terminal link reinforcer and was thus analogous to self-control. Self-control decreased as the delay between initial and terminal links increased. The results have implications for human choice situations where decisions are made between two immediately available reinforcement alternatives each associated with a different delayed outcome. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The effect of CaF<Subscript>2</Subscript> on thermodynamics of CaO-CaF<Subscript>2</Subscript>-SiO<Subscript>2</Subscript>(-MgO) slags

To address the role of CaF₂ in the CaO-CaF₂-SiO₂(-MgO) slag system employed for the production of low-pressure rotor steels, the thermodynamic aspects of the slag were investigated by equilibrating it with liquid iron at 1873 K in CaO or MgO crucibles. Presaturation of slag with an oxide block piece of CaO or MgO in a Pt crucible and application of a carbon paste to the outside of an oxide crucible were designed to prevent crucible failure during the slag-metal experiments. The liquidus isotherm and phase boundary of the preceding slag system were investigated using the slag-metal equilibria. Also, the effect of CaF₂ on the sulfide capacity and the activity coefficient of Fe _t O were of particular interest in controlling the sulfur level and cleanliness of low-pressure rotor steels.     

The transient to steady-state transition during the spray-rolling process

From the geometrical standpoint, this article presents a qualitative theoretical analysis and prediction of the transient to steady-state transition during the spray-rolling process, a novel manufacturing technique for aluminum strips. The analytical results indicate that, when the deposited materials at the specific points on one roll surface overlap their counterparts on the other roll surface, spray rolling transits from the transient state to the steady state. The specific points are the limiting deposition positions of the atomized droplets on the roll surface initially.     

Second-order stresses and strains in heterogeneous steels: Self-consistent modeling and X-ray diffraction analysis

Theoretical and experimetal methods have been developed to characterize the effect of mechanical loading on the mesoscopic and macroscopic mechanical state of polycrystalline materials. Ferritic and austenitic single-phase materials were first analyzed, then phase interaction was studied in a multiductile phase material (austeno-ferritic duplex steel) and a natural reinforced composite (pearlitic steel). The theoretical method is based on the self-consistent approach in which elastic and plastic characteristics of the phases have been applied through the micromechanical behavior of single-crystal-using slip systems and microscopic hardening. The effects of a crystallographic texture and phase interaction during loading and after unloading were studied. The elastic and plastic anisotropy of the grains having the same crystallographic orientation were assessed by diffraction strain analysis. The simulation was compared with the experiments performed using the X-ray diffraction technique. In the considered duplex and pearlitic steels, it was observed that the ferrite stress state is much lower than the austenite and cementite ones. The results of diffraction strain distribution have showed the pertinence of the models and give valuable information, for example, for the yield stress and the hardening parameters of each phase in a two-phase material.     

Cyclic oxidation response of multiphase niobium-based alloys

Cyclic oxidation tests were performed on multiphase Nb-based alloys containing silicide, Laves, and Nb solid solution phases. In particular, the oxidation resistance of six alloys with various compositions (Nb, Ti, Hf, Cr, Ge, and Si) and microstructures was characterized by thermal cycling from ambient temperature to a peak temperature that ranges from 900 °C to 1400 °C. Weight change data were obtained and the corresponding spalled oxides were collected and identified by X-ray diffraction. The results indicated that Nb-based alloys formed a mixture of CrNbO₄, Nb₂O₅, and Nb₂O₅ · TiO₂, with possibly small amounts of SiO₂ or GeO₂. The oxidation resistance was improved when CrNbO₄ formed instead of Nb₂O₅ and Nb₂O₅ · TiO₂. These results were used to assess the influence of microstructure and composition on the oxidation resistance of multiphase Nb-based alloys.     

Predicting Acute Renal Failure after Cardiac Surgery: Validation and Re‐definition of a Risk‐Stratification Algorithm

Background:  Acute renal failure (ARF) after cardiac surgery is associated with significant morbidity and mortality, irrespective of the need for dialysis. Previous studies have attempted to identify predictors of ARF and develop risk stratification algorithms. This study aims to validate the algorithm in an independent cohort of patients that includes a significant proportion of female and black patients and compares two different definitions of renal outcome.
Methods:  A large single center cardiac surgery database was examined (n, 24,660; 1993–2000) which included 29.9% females and 3.7% black patients. Post‐operative ARF was defined as: a) ARF requiring dialysis, b) > 50% reduction in creatinine clearance relative to baseline or requiring dialysis. Clinical variables related to baseline renal function and cardiovascular disease were used in recursive partitioning analysis for both outcome definitions. Chi‐square goodness of fit analysis was performed to validate the algorithm.
Results:  The frequency of post‐operative ARF requiring dialysis ranged between 0.5 and 15.5% based on the risk categories with the area under the receiver operating characteristic (ROC) curve of 0.78. Using the more inclusive definition of ARF, the frequency was significantly higher ranging from 2.6 to 25%(P < 0.001) with an area under ROC curve of 0.65.
Conclusions:  The renal risk stratification algorithm is valid in predicting post‐operative ARF in an independent cohort of patients, well represented by differences in gender and race. Since the need for dialysis remains subjective, a more objective and inclusive definition of ARF may help in identifying a larger number of patients 'at‐risk'.     

On one boundary-value problem for the Laplace equation

We have derived a Fredholm-type equation of the second kind for a directional derivative problem arising in the stationary theory of heat conduction. One result of Ya. B. Lopatinskii has been refined. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 2, pp. 197–200, March–April, 2007.     

Kernel Spectral Matched Filter for Hyperspectral Imagery

In this paper a kernel-based nonlinear spectral matched filter is introduced for target detection in hyperspectral imagery, which is implemented by using the ideas in kernel-based learning theory. A spectral matched filter is defined in a feature space of high dimensionality, which is implicitly generated by a nonlinear mapping associated with a kernel function. A kernel version of the matched filter is derived by expressing the spectral matched filter in terms of the vector dot products form and replacing each dot product with a kernel function using the so called kernel trick property of the Mercer kernels. The proposed kernel spectral matched filter is equivalent to a nonlinear matched filter in the original input space, which is capable of generating nonlinear decision boundaries. The kernel version of the linear spectral matched filter is implemented and simulation results on hyperspectral imagery show that the kernel spectral matched filter outperforms the conventional linear matched filter.