Effect of Zwitterionic Surfactants on Interparticle Forces, Rheology, and Particle Packing of Silicon Nitride Slurries

Phosphocholine (PC) zwitterionic surfactants, with different hydrocarbon chain lengths (C₆C₆PC to C₉C₉PC), were absorbed on the surface of silicon nitride near the isoelectric point (pH 6). Adsorption of the surfactants changed the lateral and normal surface forces, the rheology, and the consolidation behavior of the particles. The normal force between two silicon nitride surfaces as a function of separation and the lateral (friction) forces were measured using an atomic force microscope (AFM). These measurements indicated that surfactant adsorption reduced the magnitude of the long-range attractive van der Waals force and produced a repulsive short-range force. Although the adsorbed layers provided a barrier to particle contact, they could be ejected with a critical force that increased with the hydrocarbon chain length. The effect of an adsorbed layer on the viscosity and consolidation of slurries was also measured. The viscosity of all slurries decreased with increasing shear rate, indicative of attractive particle networks. The highest viscosity was observed for slurries formulated at the isoelectric point without added surfactant. Much lower viscosities were observed when the surfactant concentration was greater than the critical micelle concentration (cmc). A relative density of 0.46 was obtained via pressure filtration at 4 MPa without a surfactant, and between 0.46 to 0.59 (C₆C₆PC to C₉C₉PC, respectively) for surfactant concentrations greater than the cmc. Comparing force measurements with rheology and packing density provides a basis for discussing the role of interparticle forces in ceramic powder processing via colloidal routes.     

Cellulose furoate. I. Synthesis in homogeneous and heterogeneous systems

Cellulose furoate was synthesized via heterogeneous and homogeneous reactions. Cotton cellulose and wood cellulose were used. Lithium chloride/dimethylacetamide solvent was used to dissolve the cellulose for the homogeneous reaction. The esterification reaction between cellulose and 2‐furoyl chloride was systematically studied. It revealed that the activation of cellulose was important for its esterification reaction. Activation by solvent exchange decreased the crystallinity and increased the accessibility of cellulose. X‐ray diffraction analysis showed no significant change in the spectrogram after activation of cellulose. The degree of substitution of cellulose furoate was influenced by the molecular weight of the cellulose, the stoichiometry of the reagents, the acid scavenger, and the reaction time. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2649–2655, 2001     

Polymerization of methyl methacrylate with a thermal iniferter: Diethyl 2,3‐dicyano‐2,3‐di(p‐tolyl)succinate

A hexa‐substituted ethane type compound, diethyl‐2,3‐dicyano‐2,3‐di(p‐tolyl)succinate (DCDTS), was successfully synthesized and used for initiation of methyl methacrylate (MMA) polymerization. The reaction demonstrated the characteristics of a “living” polymerization; i.e., both the yield and the molecular weight of the resulting polymers increased linearly with increasing reaction time, the molecular‐weight distribution of PMMA obtained was ～1.60 and almost unaffected by the conversion, and the resultant polymer can be chain extended by adding fresh MMA. End group analysis of the resultant PMMA confirmed that DCDTS behaves as a thermal iniferter for MMA polymerization. A block copolymer was prepared from the resultant PMMA, which contains a hexa‐substituted C? C bond functional end group. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2566–2572, 2001     

Effect of linear comonomers on the rate of crystallization of copolyesters

Small amounts of dimethyl‐4,4′‐biphenyldicarboxylate, 2,7‐dimethyl‐4,5,9,10‐tetrahydropyrenedicarboxylate, and dimethyl‐2,7‐pyrenedicarboxylate have been copolymerized into poly(ethylene) terephthalate (PET). The thermal transitions of the copolymers have been characterized, and the crystallization rates have been measured isothermally. Avrami analysis indicates that all the copolymers crystallized at a slower rate than that of the PET homopolymer. Addition of perylene to the copolymers containing pyrene enhanced the rate of crystallization, which could be the consequence of stacked arene assemblies serving as templates for crystal formation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2696–2704, 2001     

3-Deoxyschweinfurthin B Lowers Cholesterol Levels by Decreasing Synthesis and Increasing Export in Cultured Cancer Cell Lines

The schweinfurthins have potent antiproliferative activity in multiple glioblastoma multiforme (GBM) cell lines; however, the mechanism by which growth is impeded is not fully understood. Previously, we demonstrated that the schweinfurthins reduce the level of key isoprenoid intermediates in the cholesterol biosynthetic pathway. Herein, we describe the effects of the schweinfurthins on cholesterol homeostasis. Intracellular cholesterol levels are greatly reduced in cells incubated with 3‐deoxyschweinfurthin B (3dSB), an analog of the natural product schweinfurthin B. Decreased cholesterol levels are due to decreased cholesterol synthesis and increased cholesterol efflux; both of these cellular actions can be influenced by liver X‐receptor (LXR) activation. The effects of 3dSB on ATP‐binding cassette transporter 1 levels and other LXR targets are similar to that of 25‐hydroxycholesterol, an LXR agonist. Unlike 25‐hydroxycholesterol, 3dSB does not act as a direct agonist for LXR α or β. These data suggest that cholesterol homeostasis plays a significant role in the growth inhibitory activity of the schweinfurthins and may elucidate a mechanism that can be targeted in human cancers such as GBM.     

Material properties and operating configurations of membrane reactors for propane dehydrogenation

A modeling‐based approach is presented to understand physically realistic and technologically interesting material properties and operating configurations of packed‐bed membrane reactors (PBMRs) for propane dehydrogenation (PDH). PBMRs composed of microporous or mesoporous membranes combined with a PDH catalyst are considered. The influence of reaction and membrane transport parameters, as well as operating parameters such as sweep flow and catalyst placement, are investigated to determine desired “operating windows” for isothermal and nonisothermal operation. Higher Damköhler (Da) and lower Péclet (Pe) numbers are generally helpful, but are much more beneficial with highly H₂‐selective membranes rather than higher‐flux, lower‐selectivity membranes. H₂‐selective membranes show a plateau region of conversion that can be overcome by a large sweep flow or countercurrent operation. The latter shows a complex trade‐off between kinetics and permeation, and is effective only in a limited window. H₂‐selective PBMRs will greatly benefit from the fabrication of thin (～1 µm or less) membranes. © 2014 American Institute of Chemical Engineers AIChE J, 61: 922–935, 2015     

DEM‐CFD modeling of particle systems with long‐range electrostatic interactions

To investigate dynamic behaviors of monocharged particle systems, a direct truncation (DT) method and a hybrid particle‐cell (HPC) method are implemented into the discrete element method coupled with computational fluid dynamics (DEM‐CFD) with defined cutoff distances. The DT method only considers electrostatic interactions between particles within the cutoff distance while the HPC method computes electrostatic interactions in the entire computational domain. The deposition process of monocharged particles in a container in air was simulated using the developed DEM‐CFD. It was found that using the DT method, the macrostructure, evolution of granular temperature, and radial distribution function of the particle system were sensitive to the specified cutoff distance. In contrast, using the HPC method, these results were independent of the specified cutoff distance, as expected. This implies that, although electrostatic interactions between particles with large separation distances are weak, they should be considered in DEM‐CFD for accurate modeling of charged particle systems. © 2015 The Authors AIChE Journal published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers AIChE J, 61: 1792–1803, 2015     

Adventitial Tertiary Lymphoid Organs as Potential Source of MicroRNA Biomarkers for Abdominal Aortic Aneurysm

Abdominal aortic aneurysm (AAA) is an inflammatory disease associated with marked changes in the cellular composition of the aortic wall. This study aims to identify microRNA (miRNA) expression in aneurysmal inflammatory cells isolated by laser microdissection from human tissue samples. The distribution of inflammatory cells (neutrophils, B and T lymphocytes, mast cells) was evaluated in human AAA biopsies. We observed in half of the samples that adventitial tertiary lymphoid organs (ATLOs) with a thickness from 0.5 to 2 mm were located exclusively in the adventitia. Out of the 850 miRNA that were screened by microarray in isolated ATLOs (n = 2), 164 miRNAs were detected in ATLOs. The three miRNAs (miR-15a-3p, miR-30a-5p and miR-489-3p) with the highest expression levels were chosen and their expression quantified by RT-PCR in isolated ATLOs (n = 4), M1 (n = 2) and M2 macrophages (n = 2) and entire aneurysmal biopsies (n = 3). Except for the miR-30a-5p, a similar modulation was found in ATLOs and the two subtypes of macrophages. The modulated miRNAs were then evaluated in the plasma of AAA patients for their potential as AAA biomarkers. Our data emphasize the potential of miR-15a-3p and miR-30a-5p as biomarkers of AAA but also as triggers of ATLO evolution. Further investigations will be required to evaluate their targets in order to better understand AAA pathophysiology.     

Synthesis,Chiral Separation,Absolute Configuration Assignment,and Biological Activity of Enantiomers of Retro‐1 as Potent Inhibitors of Shiga Toxin

The Shiga toxin (Stx) family is composed of related protein toxins produced by the bacteria Shigella dysenteriae and certain pathogenic strains of E. coli. No effective therapies for Stx intoxication have been developed yet. However, inhibitors that act on the intracellular trafficking of these toxins may provide new options for the development of therapeutic strategies. This study reports the synthesis, chromatographic separation, and pharmacological evaluation of the two enantiomers of Retro‐1, a compound active against Stx and other such protein toxins. Retro‐1 works by inhibiting retrograde transport of these toxins inside cells. In vitro experiments proved that the configuration of the stereocenter at position 5 is not crucial for the activity of this compound. X‐ray diffraction data revealed (S)‐Retro‐1 to be slightly more active than (R)‐Retro‐1.