Shell-and-Tube Minichannel Condenser for Low Refrigerant Charge

The design of an innovative shell-and-tube heat pump condenser using 2 mm ID minichannels is presented. This condenser has been designed aiming at the minimization of the charge, which can be required by safety or environmental restrictions. Nevertheless, minichannels represent also a solution to the high-pressure challenge when using carbon dioxide as a refrigerant. The present prototype was realized for the use with propane in the framework of the European project SHERHPA, concerning the development of heat pumps working with natural fluids. Experimental data for heat transfer and pressure drop are reported in the present paper. The measurements have been obtained using refrigerant R22, which displays a temperature versus pressure saturation curve pretty close to the one of propane. The data have also been compared against a computational procedure for shell-and-tube heat exchangers design. The refrigerant charge has been computed by means of different void fraction correlations, showing that the expected charge is less than half the quantity required by a brazed plate condenser giving the same capacity.     

New processes in the environmental chemistry of nitrite. 2. The role of hydrogen peroxide

The oxidation of nitrite and nitrous acid to *NO2 upon irradiation of dissolved Fe(III), ferric (hydr)oxides, and nitrate has previously been shown to enhance phenol nitration. This allowed the proposal of a new role for nitrite and nitrous acid in natural waters and atmospheric aerosols. This paper deals with the interaction between hydrogen peroxide, a key environmental factor in atmospheric oxidative chemistry, and nitrite/nitrous acid. The reaction between nitrous acid and hydrogen peroxide yields peroxynitrous acid, a powerful nitrating agent and an important intermediate in atmospheric chemistry. The kinetics of this reaction is compatible with a rate-determining step involving either H3O2+ and HNO2 or H2O2 and protonated nitrous acid. In the former case the rate constant between the two species would be 179.6 +/- 1.4 M(-1) s(-1), in the latter case it would be as high as (1.68 +/- 0.01) x 10(10) M(-1) s(-1) (diffusion-controlled reaction). Due to the more reasonable value of the rate constant, the reaction between H3O2+ and HNO2 seems more likely. In the presence of HNO2 + H2O2 the nitration of phenol is strongly enhanced when compared with HNO2 alone. The nitration rate of phenol in the presence of peroxynitrous acid decreases as pH increases, thus HOONO is a potential source of atmospheric nitroaromatic compounds in acidic water droplets. The mixture Fe(II) + H2O2 (Fenton reagent) can oxidize nitrite and nitrous acid to nitrogen dioxide, which results in phenol nitration. The nitration in the presence of Fe(II) + H2O2 + NO2-/HNO2 occurs more rapidly than the one with H2O2 + NO2-/HNO2 at pH 5, where little HNO2 is available to directly react with hydrogen peroxide. Both systems, however, are more effective than NO2-/HNO2 alone in producing nitrophenols from phenol. Another process leading to the oxidation of nitrite to nitrogen dioxide is the photo-Fenton one. It can be relevant at pH > or = 6, as nitrite does not react with H2O2 at room temperature. Under such conditions the source of Fe(II) is the photolysis of ferric (hydr)oxides (heterogeneous photo-Fenton reaction). In the presence of nitrite this reaction induces very effective nitrophenol formation from phenol.     

Comparative analysis of the outdoor performance of a dye solar cell mini‐panel for building integrated photovoltaics applications

New generation photovoltaic (PV) devices such as polymer and dye sensitized solar cells (DSC) have now reached a more mature stage of development, and among their various applications, building integrated PVs seems to have the most promising future, especially for DSC devices. This new generation technology has attracted an increasing interest because of its low cost due to the use of cheap printable materials and simple manufacturing techniques, easy production, and relatively high efficiency. As for the more consolidated PV technologies, DSCs need to be tested in real operating conditions and their performance compared with other PV technologies to put into evidence the real potential. This work presents the results of a 3 months outdoor monitoring activity performed on a DSC mini‐panel made by the Dyepower Consortium, positioned on a south oriented vertical plane together with a double junction amorphous silicon (a‐Si) device and a multi‐crystalline silicon (m‐Si) device at the ESTER station of the University of Rome Tor Vergata. Good performance of the DSC mini‐panel has been observed for this particular configuration, where the DSC energy production compares favorably with that of a‐Si and m‐Si especially at high solar angles of incidence confirming the suitability of this technology for the integration into building facades. This assumption is confirmed by the energy produced per nominal watt‐peak for the duration of the measurement campaign by the DSC that is 12% higher than that by a‐Si and only 3% lower than that by m‐Si for these operating conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Performance Analysis of Arbitration Policies for SoC Communication Architectures

As technology scales toward deep submicron, the integration of a large number of IP blocks on the same silicon die is becoming technically feasible, thus enabling large-scale parallel computations, such as those required for multimedia workloads. The communication architecture is becoming the bottleneck for these multiprocessor Systems-on-Chip (SoC), and efficient contention resolution schemes for managing simultaneous access requests to the shared communication resources are required to prevent system performance degradation. The contribution of this work is to analyze the impact on multiprocessor SoC performance of different bus arbitration policies under different communication patterns, showing the distinctive features of each policy and the strong correlation of their effectiveness with the communication requirements of the applications. Beyond traditional arbitration schemes such as round robin and TDMA, another policy is considered that periodically allocates a temporal slot for contention-free bus utilization to a processor which needs fixed predictable bandwidth for the correct execution of its time-critical task. The results are derived on a complete and scalable multiprocessor SoC simulation platform based on SystemC, whose software support includes a complete embedded multiprocessor OS (RTEMS). The communication architecture is AMBA compliant, and we exploit the flexibility of this multi-master commercial standard, which does not specify the arbitration algorithm, to implement the explored contention resolution schemes.     

Low-power high-speed rail-to-rail LCD output buffer with dual-path push–pull operation and quiescent current control

The present paper addresses a new compact low-power high-speed output buffer amplifier topology for large-size liquid crystal display applications. The suggested buffer achieves fast driving performance, draws a low quiescent current during static operation and offers a rail-to-rail common-mode input range. The circuit provides enhanced slewing capabilities with a limited power consumption by simultaneously exploiting the push–pull output sections of two basic complementary-type input amplifiers to realize a dual-path push–pull operation of the output stage. An auxiliary biasing network integrated in the input differential stage allows the quiescent bias conditions of the class-AB output stage to be inherently controlled without additional current dissipation. Post-layout simulation results confirm that the proposed amplifier can drive a 1-nF column line load within a 0.9-μs settling time under a 3-V full voltage swing, while drawing only 3.5-μA quiescent current. Monte Carlo simulations are finally carried out, showing a good degree of robustness of the proposed output buffer against process and mismatch variations.     

A 0.18 μm CMOS direct down-converter for highly integrated 3G receivers

This paper presents the design of a high dynamic range direct down-converter for 3G cell-phone applications. The mechanisms responsible for second-order intermodulation distortion are discussed in details, leading to the following design strategy: the transconductor is degenerated by means of an RC filter, an LC network resonating at RF frequency loads the switching pair and carefully matched resistors are used in the output load. Prototypes realized in 0.18 μm CMOS show: +78 dBm IIP2 minimum among 40 samples, +10 dBm IIP3, 4 nV/√Hz input-referred noise density while burning only 4 mA from 1.8 V.     

On the Spatial Distribution of Fingerprint Singularities

Fingerprint singularities play an important role in several fingerprint recognition and classification systems. Although some general relationships and constraints about the location of singularities in the different fingerprint classes are well known, to the best of our knowledge no statistical models have been developed until now. This paper studies the spatial distributions of singularity locations in nature and derives, from a representative dataset of labelled samples, the probability density functions of the four main fingerprint classes. The results obtained can be directly exploited to improve the accuracy of many techniques relying on the position of singularities, as confirmed by the results of two experiments on fingerprint classification and synthesis.     

Mitigation of Liquefaction-Induced Lateral Deformation in a Sloping Stratum: Three-dimensional Numerical Simulation

Finite-element (FE) simulations are increasingly providing a versatile environment for conducting lateral ground deformation studies. In this environment, mitigation strategies may be assessed in order to achieve economical and effective solutions. On the basis of a systematic parametric study, three-dimensional FE simulations are conducted to evaluate mitigation by the stone column (SC) and the pile-pinning approaches. Mildly sloping saturated cohesionless strata are investigated under the action of an applied earthquake excitation. For that purpose, the open-source computational platform OpenSees is employed, through a robust user interface that simplifies the effort-intensive pre- and postprocessing phases. The extent of deployed remediation and effect of the installed SC permeability are investigated. The influence of mesh resolution is also addressed. Generally, SC remediation was found to be effective in reducing the sand stratum lateral deformation. For a similar stratum with permeability in the silt range, SC remediation was highly ineffective. In contrast, pile pinning appeared to be equally effective for the sand and silt strata permeability scenarios. Overall, the conducted study highlights the potential of computations for providing insights toward the process of defining a reliable remediation solution.     

Rawseeds ground truth collection systems for indoor self-localization and mapping

A trustable and accurate ground truth is a key requirement for benchmarking self-localization and mapping algorithms; on the other hand, collection of ground truth is a complex and daunting task, and its validation is a challenging issue. In this paper we propose two techniques for indoor ground truth collection, developed in the framework of the European project Rawseeds, which are mutually independent and also independent on the sensors onboard the robot. These techniques are based, respectively, on a network of fixed cameras, and on a network of fixed laser scanners. We show how these systems are implemented and deployed, and, most importantly, we evaluate their performance; moreover, we investigate the possible fusion of their outputs.