When simulated environments make the difference: the effectiveness of different types of training of car service procedures

An empirical analysis was performed to compare the effectiveness of different approaches to training a set of procedural skills to a sample of novice trainees. Sixty-five participants were randomly assigned to one of the following three training groups: (1) learning-by-doing in a 3D desktop virtual environment, (2) learning-by-observing a video (show-and-tell) explanation of the procedures, and (3) trial-and-error. In each group, participants were trained on two car service procedures. Participants were recalled to perform a procedure either 2 or 4 weeks after the training. The results showed that: (1) participants trained through the virtual approach of learning-by-doing performed both procedures significantly better (i.e. p < .05 in terms of errors and time) than people of non-virtual groups, (2) the virtual training group, after a period of non-use, were more effective than non-virtual training (i.e. p < .05) in their ability to recover their skills, (3) after a (simulated) long period from the training—i.e. up to 12 weeks—people who experienced 3D environments consistently performed better than people who received other kinds of training. The results also suggested that independently from the training group, trainees’ visuospatial abilities were a predictor of performance, at least for the complex service procedure, adj R ² = .460, and that post-training performances of people trained through virtual learning-by-doing are not affected by learning styles. Finally, a strong relationship (p < .001, R ² = .441) was identified between usability and trust in the use of the virtual training tool—i.e. the more the system was perceived as usable, the more it was perceived as trustable to acquire the competences.     

Air‐ground Matching: Appearance‐based GPS‐denied Urban Localization of Micro Aerial Vehicles

In this paper, we address the problem of globally localizing and tracking the pose of a camera‐equipped micro aerial vehicle (MAV) flying in urban streets at low altitudes without GPS. An image‐based global positioning system is introduced to localize the MAV with respect to the surrounding buildings. We propose a novel air‐ground image‐matching algorithm to search the airborne image of the MAV within a ground‐level, geotagged image database. Based on the detected matching image features, we infer the global position of the MAV by back‐projecting the corresponding image points onto a cadastral three‐dimensional city model. Furthermore, we describe an algorithm to track the position of the flying vehicle over several frames and to correct the accumulated drift of the visual odometry whenever a good match is detected between the airborne and the ground‐level images. The proposed approach is tested on a 2 km trajectory with a small quadrocopter flying in the streets of Zurich. Our vision‐based global localization can robustly handle extreme changes in viewpoint, illumination, perceptual aliasing, and over‐season variations, thus outperforming conventional visual place‐recognition approaches. The dataset is made publicly available to the research community. To the best of our knowledge, this is the first work that studies and demonstrates global localization and position tracking of a drone in urban streets with a single onboard camera.     

Modelling of interfacial mass transfer in microfluidic solvent extraction: part II. Heterogeneous transport with chemical reaction

The use of a microfluidic device in determining the extraction kinetics of Co^II ions by di-(2-ethylhexyl) phosphoric acid (DEHPA) was demonstrated. Experimental data obtained using a Y-Y-shaped microchannel were modelled using a finite volume method. The contributions of diffusion and reaction transport resistances to the overall rate of mass transfer were obtained. A diffusion-controlled transfer assumption could not account for the experimental data, confirming that transport occurs under a mixed reaction–diffusion resistance regime. The reaction rate constant was determined to be $(2.4 \pm 0.6) \times 10^{-10}$  m/s, in good agreement with corresponding Lewis cell measurements from the literature.     

Laser pyrolysis in papers and patents

Journal of Intelligent Manufacturing - This paper presents a critical review of laser pyrolysis. Although this technology is almost 60&nbsp;years old, in literature many researchers, both from...     

AlphaPilot: autonomous drone racing

Autonomous Robots - This paper presents a novel system for autonomous, vision-based drone racing combining learned data abstraction, nonlinear filtering, and time-optimal trajectory planning. The...     

Herding stochastic autonomous agents via local control rules and online target selection strategies

Autonomous Robots - We propose a simple yet effective set of local control rules to make a small group of “herder agents” collect and contain in a desired region a large ensemble of...     

Prototyping and modeling of the centrifugal casting process for paraffin waxes

Centrifugal casting is a technology used for manufacturing hybrid rocket paraffin grains. This technology helps avoiding voids formation inside the solid paraffin as it cools. Voids are formed because of air bubbles being entrapped while pouring and because the liquid wax shrinks by 17–19% upon cooling. In this work, the centrifugal casting process for the manufacturing of paraffin cylinders was prototyped at two different scales considering critical casting issues. The effects of process parameters (rotational speed, melt temperature, and flow rate) on the tensile properties of the manufactured grains were analyzed. The results of the optimization conducted at the lower scale (2.5?kg) were up scaled to manufacture 25?kg grains. The resulting mechanical properties complied with the design specifications, and they were better than those characterized from the gravity cast wax. A numerical model of growth and dissolution of bubbles during the process was then developed to predict the quality of the castings. The numerical results showed how increasing the mold rotational speed up to 1800?rpm reduced the removal time. However, compared to grains solidification time, the predicted removal times were much shorter, proving the advantage of centrifugal casting in counteracting voids formation.     

Performance evaluation of efficient multi-objective evolutionary algorithms for design space exploration of embedded computer systems

Multi-objective evolutionary algorithms (MOEAs) have received increasing interest in industry because they have proved to be powerful optimizers. Despite the great success achieved, however, MOEAs have also encountered many challenges in real-world applications. One of the main difficulties in applying MOEAs is the large number of fitness evaluations (objective calculations) that are often needed before an acceptable solution can be found. There are, in fact, several industrial situations in which fitness evaluations are computationally expensive and the time available is very short. In these applications efficient strategies to approximate the fitness function have to be adopted, looking for a trade-off between optimization performance and efficiency. This is the case in designing a complex embedded system, where it is necessary to define an optimal architecture in relation to certain performance indexes while respecting strict time-to-market constraints. This activity, known as design space exploration (DSE), is still a great challenge for the EDA (electronic design automation) community. One of the most important bottlenecks in the overall design flow of an embedded system is due to simulation. Simulation occurs at every phase of the design flow and is used to evaluate a system which is a candidate for implementation. In this paper we focus on system level design, proposing an extensive comparison of the state-of-the-art of MOEA approaches with an approach based on fuzzy approximation to speed up the evaluation of a candidate system configuration. The comparison is performed in a real case study: optimization of the performance and power dissipation of embedded architectures based on a Very Long Instruction Word (VLIW) microprocessor in a mobile multimedia application domain. The results of the comparison demonstrate that the fuzzy approach outperforms in terms of both performance and efficiency the state of the art in MOEA strategies applied to DSE of a parameterized embedded system.     

A coarse-grain reconfigurable architecture for multimedia applications supporting subword and floating-point calculations

Signal processors exploiting ASIC acceleration suffer from sky-rocketing manufacturing costs and long design cycles. FPGA-based systems provide a programmable alternative for exploiting computation parallelism, but the flexibility they provide is not as high as in processor-oriented architectures: HDL or C-to-HDL flows still require specific expertise and a hardware knowledge background. On the other hand, the large size of the configuration bitstream and the inherent complexity of FPGA devices make their dynamic reconfiguration not a very viable approach. Coarse-grained reconfigurable architectures (CGRAs) are an appealing solution but they pose implementation problems and tend to be application specific. This paper presents a scalable CGRA which eases the implementation of algorithms on field programmable gate array (FPGA) platforms. This design option is based on two levels of programmability: it takes advantage of performance and reliability provided by state-of-the-art FPGA technology, and at the same time it provides the user with flexibility, performance and ease of reconfiguration typical of standard CGRAs. The basic cell template provides advanced features such as sub-word SIMD integer and floating-point computation capabilities, as well as saturating arithmetic. Multiple reconfiguration contexts and partial run-time reconfiguration capabilities are provided, tackling this way the problem of high reconfiguration overhead typical of FPGAs. Selected instances of the proposed architecture have been implemented on an Altera Stratix II EP2S180 FPGA. On this system, we mapped some common DSP, image processing, 3D graphics and audio compression algorithms in order to validate our approach and to demonstrate its effectiveness by benchmarking the benefits achieved.