Wavelet decomposition of cardiovascular signals for baroreceptor function tests in pigs

In this paper, the discrete wavelet transform (DWT) was applied to analyze the fluctuations in RR interval and systolic arterial pressure (SAP) recorded from eight alpha-chloralose anesthetized pigs. Our aim was to characterize the autonomic modulation before and after cardiac autonomic blockade and during baroreflex function tests. The instantaneous power of decomposed low-frequency (LF) and high-frequency (HF) components was used for a time-variant spectral analysis. Our results suggested that transient events and changes in autonomic modulation were detected with high temporal resolution. A nonlinear relationship between RR interval and SAP during pharmacologically induced changes in blood pressure was found, when the superimposed effect of respiratory sinus arrhythmia was removed. In addition, the baroslopes were nearly linear when both the LF and HF components were removed using DWT decomposition.     

A Plan for the Development of Fusion Energy

This is the final report of a panel set up by the U.S. Department of Energy (DOE) Fusion Energy Sciences Advisory Committee (FESAC) in response to a charge letter dated September 10, 2002 from Dr. Ray Orbach, Director of the DOE's Office of Science. In that letter, Dr. Orbach asked FESAC to develop a plan with the end goal of the start of operation of a demonstration power plant in approximately 35 years. This report, submitted March 5, 2003, presents such a plan, leading to commercial application of fusion energy by mid-century. The plan is derived from the necessary features of a demonstration fusion power plant and from the time scale defined by President Bush. It identifies critical milestones, key decision points, needed major facilities and required budgets. The report also responds to a request from DOE to FESAC to describe what new or upgraded fusion facilities will best serve our purposes over a time frame of the next twenty years.     

过氧化物对QY8911-Ⅲ树脂固化过程的影响

利用差示扫描量热(DSC)法研究了过氧化物对QY8911-Ⅲ型双马来酰亚胺树脂(BMI)的固化过程的影响。测试了过氧化物含量对树脂固化特性和力学性能的影响。结果表明,引入过氧化物降低了树脂的起始反应温度,提高了固化速度。弯曲强度略有提高,而冲击强度下降,因而过氧化物含量应小于0.6%。注射模压实验表明,引入过氧化物后,消除了短碳纤维(CF)增强BMI复合材料注射模压过程中的严重溢料现象,并使成型时间由原来的2 h缩短到15 min。     

Evaluating the crash and citation rates of Utah drivers licensed with medical conditions, 1992-1996

BACKGROUND: Medical problems may affect the ability to drive motor vehicles, and programs that control the issuing of driver licenses to individuals with medical conditions exist in most states. The main activity of these programs is the imposition of restrictions upon the driving privileges of individuals with medical conditions that are deemed to pose some risk to public safety. However, little is known about the effectiveness of these licensing programs. OBJECTIVE: The objective of this study was to compare the rates of adverse driving events (crash, at-fault crash and citations) experienced by drivers licensed with medical conditions to those of age-, sex- and location-matched controls. Separate comparisons were made for drivers reporting medical conditions licensed with full driving privileges, and those with restricted driving privileges (e.g. speed, area and time of day). DESIGN: Retrospective case-control. METHODS: The study population was all drivers licensed in the state of Utah who reported a medical condition on their driver license application, over the 5-year period 1992-1996. Drivers enter the program by self-reporting their medical problems. Control drivers were chosen from the entire population of drivers licensed in Utah for the same period. Information on driver license status, participation in the medical conditions program, citations, involvement in crashes, and death certificate data was obtained from the relevant state agencies. Probabilistic linkage methodology was used to link the records in these disparate databases for eventual analysis. Rates of citation, crashes and at-fault crashes, expressed as events per 10000 license days, were calculated separately for program drivers and their corresponding control groups for each medical condition category and restriction status. These data were used to determine an estimate of relative risk (RR) and 95% confidence intervals. Results: As a group, medical conditions drivers had modestly elevated rates of adverse driving events compared with control drivers (RR 1.09-1.74). Rates in the largest medical category, 'cardiovascular conditions', were not higher than controls. Rates were higher than control for some conditions, such as 'alcohol' and 'learning and memory', for some adverse events (RR 2.2 -5.75). Drivers with more than one medical condition appeared comparable to the general group of medical conditions program drivers. CONCLUSIONS: Drivers in Utah medical conditions program had modestly elevated rates of adverse driving events compared to matched controls. Possible underreporting of medical conditions and accurate assessment of exposure rates are potential weaknesses in the program.     

Electrokinetic stacking injection of neutral analytes under continuous conductivity conditions

In capillary electrokinetic chromatography, neutral analytes can be injected by electroosmotic flow directly from a sample matrix into a separation buffer containing an electrokinetic vector with an opposite mobility. Analytes are injected at the velocity of electroosmotic flow but are retained at the interface of the sample matrix co-ion and separation buffer micelle zones as analyte/micelle complexes. A simple electrokinetic chromatography system containing sodium dodecyl sulfate as the micellar agent with borate as the buffering electrolyte included in the separation buffer and in the sample matrix to provide continuous conductivity was investigated. Concentrations of the micelle, methanol, and borate in the separation buffer were explored to increase maximum injection length of neutral analytes. Reducing the analyte velocity in the separation buffer without substantially decreasing the velocity of the analyte during injection from the sample vial allowed greatly extended sample plug injection lengths. It is presently possible to inject sample solvent volumes equivalent to approximately 7 effective capillary lengths (180 cm) with a 50-microm-i.d. capillary (24.5 cm effective capillary length), total volume of sample injection approximately 3.5 microL Equations describing the injection process and maximum injection lengths for this mode of stacking in electrokinetic capillary chromatography are introduced. The result of this work leads to a postulated generalization of electrokinetic stacking injection maximums for electrophoretic processes, and the concept of orthogonal analyte stacking/injection systems is discussed.     

High-resolution imaging with an aberration-corrected transmission electron microscope

Recently an electromagnetic hexapole system for the correction of the spherical aberration of the objective lens of a 200 kV transmission electron microscope has been constructed by Haider and coworkers. By appropriately exciting the hexapole elements it is possible to adjust specific values of the spherical aberration coefficient ranging from the value of the original uncorrected instrument over zero even to negative values. In the first part of the paper the consequences of the tunable spherical aberration are investigated. New imaging modes are available: By adjustment of an optimum value for the spherical-aberration coefficient, the point resolution of phase-contrast imaging can be extended to the information limit. Phase-contrast imaging can be improved by a reduced level of contrast delocalisation. For zero aberration contrast delocalisation does not occur. In this case high-resolution investigations are carried out under amplitude-contrast conditions, where the local image intensity of crystalline objects is controlled by electron diffraction channelling. The defocus and spherical aberration values related to the new imaging modes are given. In the second part novel applications of the instrument to semiconductor heterostructures and ceramic grain boundaries are examined.     

An adaptive technique for content-based image retrieval

We discuss an adaptive approach towards Content-Based Image Retrieval. It is based on the Ostensive Model of developing information needs—a special kind of relevance feedback model that learns from implicit user feedback and adds a temporal notion to relevance. The ostensive approach supports content-assisted browsing through visualising the interaction by adding user-selected images to a browsing path, which ends with a set of system recommendations. The suggestions are based on an adaptive query learning scheme, in which the query is learnt from previously selected images. Our approach is an adaptation of the original Ostensive Model based on textual features only, to include content-based features to characterise images. In the proposed scheme textual and colour features are combined using the Dempster-Shafer theory of evidence combination. Results from a user-centred, work-task oriented evaluation show that the ostensive interface is preferred over a traditional interface with manual query facilities. This is due to its ability to adapt to the user's need, its intuitiveness and the fluid way in which it operates. Studying and comparing the nature of the underlying information need, it emerges that our approach elicits changes in the user's need based on the interaction, and is successful in adapting the retrieval to match the changes. In addition, a preliminary study of the retrieval performance of the ostensive relevance feedback scheme shows that it can outperform a standard relevance feedback strategy in terms of image recall in category search.     

Nano‐emissive display technology for large‐area HDTV

Abstract— Using nano‐emissive display (NED) technology, Motorola labs has successfully developed 5‐in. full‐color display prototypes. Carbon‐nanotube‐based field‐emission displays with a pixel size of 0.726 mm for a 42‐in. HDTV exhibit video image quality comparable to CRT displays and demonstrate a luminance of 350 cd/m². These novel low‐drive‐voltage NEDs take advantage of selective growth of CNTs to obtain the desired electron‐emission performance while maintaining inexpensive manufacturing due to a simple self‐focusing and self‐regulating planar structure. Improved video image quality and color purity are achieved with very low power consumption and without the need for an expensive focusing grid.     

利用Excel实现监控系统数据的二次计算

在实时监控系统中,数据处理是一项基本功能,对于较复杂的数据计算通常不得不在系统设计期间确定计算的方式和输入变量,这样降低了系统的灵活性。本文介绍了一种通过调用Excel组件实现复杂二次计算的方法,利用此法可使在设计期并不确定二次计算的方式,而在运行中通过数据库的设定和Excel工作表的设计实现各种二次计算。     

结合土地利用再谈城市交通可持续发展

针对城市交通的现状分析了中国城市交通可持续发展的制约因素,论述了合理的土地利用规划是城市交通规划的前提,是解决21世纪我国城市交通面临的主要矛盾的根本方法,是实现我国城市交通可持续发展的有效途径.