Leachability of degradation products from hard chairside reline resins in artificial saliva: Effect of water‐bath post‐polymerization treatment

The effect of a post‐polymerization treatment on the leaching of methacrylic acid (MA) and benzoic acid (BA) from the reline resins [Kooliner (K), New Truliner (N), Ufi Gel hard (U), and Tokuso Rebase Fast (T)] was evaluated. Specimens of each material were divided into two groups: Group C (control) – left untreated; Group WB (water‐bath) – immersion in water at 55 ± 1°C for 10 min. Specimens were placed in artificial saliva at 37 ± 1°C and, after 1‐, 3‐, 5‐, 24‐h and 3‐, 7‐, 14‐, and 30‐day intervals, aliquots were removed and analyzed using high performance liquid chromatography. Data were analyzed by using Wilcoxon, Mann–Whitney or Kruskal–Wallis tests (α = 0.05). At 1 h, the concentration of MA released from U control specimens was higher than those of the other ones, and decreased after 3 h. WB specimens released lower amounts of MA than control specimens only for material U, at the 1‐ and 3‐h periods. For all control specimens, concentrations of leached BA progressively decreased within 5 h and from 24 h to the end. WB specimens released significantly lower amounts of BA than did the control groups. The highest concentration of MA was leached from control specimens of Ufi Gel hard. Water‐bath post‐polymerization treatment caused a significant reduction in elution of BA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Thermodynamic and Experimental Investigations of High-Temperature Refractory Corrosion by Molten Slags

Corrosion mechanisms between MgO refractory substrates and FeNi slags were investigated. The FeNi slags taken into consideration represent a simple synthetically mixed slag with specific oxides and a real slag from a ferroalloy producer. The MgO refractory substrates with the specimens of FeNi slag were heated in a hot-stage microscope at 10 K/min from room temperature to three different temperatures 1573 K, 1723 K, and 1923 K (1300 °C, 1450 °C, and 1650 °C). The experiments were carried out under a controlled gas atmosphere that simulates the relevant process conditions. The corrosion mechanisms of each system were followed by scanning electron microscope analyses. The results obtained showed that slag corrosion dominates, with a pronounced partial dissolution of refractory fines forming Mg-silicates of type forsterite. It was also observed that iron oxide present in the slag diffused into the coarse refractory grains forming magnesiowustite. Finally, the results obtained were compared with those predicted by FACTSAGE software to understand the corrosion mechanisms and draw implications for improving the refractory performance and lifetime.     

An observer‐metamerism sensitivity index for electronic displays

The effect of observer metamerism induced by electronic displays depends to a large extent on their primary spectra (red, green, and blue in the most common case). In particular, for narrow‐band primary spectra whose peak wavelength lies in the range of high variability of the observer's color‐matching function, some observers can experience very large differences between actual surface colors (e.g. in a light booth) and displayed colors if the monitor is optimized for the International Commission on Illumination (CIE) 1931 standard observer. However, because narrow‐band light‐emitting diodes lead to larger color gamuts, more and more monitors with very narrow band primaries are coming onto the market without manufacturers taking into account the associated problem of observer variations. Being able to measure these variations accurately and efficiently is therefore an important objective. In this paper, we propose a new approach to predict the extent of observer metamerism for a particular multiprimary display. Unlike existing dedicated models, ours does not depend on a reference illuminant and a set of reflectance spectra and is computationally more efficient.     

Atmospheric trace gas analysis with cavity ring-down spectroscopy

Cavity ring-down spectroscopy (CRDS) is a highly sensitive laser absorption method. It can be used for quantitative analysis of molecular species at the sub-ppb level. The absorption cell (cavity) is sealed by two high-reflective mirrors on each side, which results in an effective absorption path-length of some kilometers. Our experiments for atmospheric gas analysis have been carried out so far with an Excimer pumped dye laser in the UV-VIS and a CO overtone sideband laser in the wavelength region around 3 μm. Experiments with an all solid-state difference frequency laser system will follow. In the UV-VIS region, we measured trace gas molecules like SO₂, NO₂, and CH₂O. In the mid-infrared, around 3 μm, we measured hydrocarbons like CH₄, C₂H₆, and C₂H₄ with a detection limit of less than 1 ppb. The noise equivalent absorption coefficients in the MIR are in the order of 1.7·10⁻⁹ cm⁻¹. Due to the high data acquisition rate and the high sensitivity, CRDS enables real-time detection of trace gases in ambient air.     

An in situ intercalative polymerization method for preparing UV curable clay–polymer nanocomposites

A novel in situ intercalative polymerization technique was used to disperse clay mineral in a precursor resin for use in UV curing by performing an in situ ion exchange reaction during polyesterification. Unmodified montmorillonite (MMT) was added to a reaction mixture composed of monomers and methyl, tallow, bis‐2‐hydroxyethyl ammonium (MTEtOH) during the synthesis of unsaturated polyesters to create resins containing highly dispersed, organically modified MMT. UV‐curable clay–polymer nanocomposite (CPN) films were then prepared utilizing donor–acceptor chemistry through reactions of the unsaturated polyester resin with triethylene glycol divinyl ether. Functional group conversion improved up to 15% by the incorporation of clay mineral into the polymer matrix through the in situ polymerization method. The CPNs also had improved barrier, mechanical, and thermal properties over a control film containing no clay mineral. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42601.     

基于星敏感器指向的船载雷达轴系误差分离模型

针对现有船载雷达动态标校方法的不足,提出了一种基于星敏感器的船载雷达轴系误差标校方法。该方法以精确的星敏感器地平指向为比对基准,解算船载雷达的轴系误差。设计了基于星敏感器的船载雷达动态标校方案,分析了船摇测量误差对雷达测角精度的影响,推导了天线座垂向变形引起的雷达测角误差修正模型。根据测量目标的不同,分别建立了联合测星与跟踪目标时的船载雷达轴系误差分离模型。最后通过联合测星试验对轴系误差分离模型进行了验证。试验结果表明,利用动态标校成果修正后的船载雷达方位、俯仰系统残差分别为3”和9”,随机残差分别为40”和45”,满足雷达轴系误差标定要求,具有较高的实用价值。