Variation in the carotenoid composition of acerola and its processed products

Acerola is now commercially produced and processed in Brazil. Known for its very high vitamin C content, this fruit is also a good source of β‐carotene. The present study was carried out to verify variation in the carotenoid composition along the food chain. Neoxanthin, violaxanthin, lutein, β‐cryptoxanthin, α‐carotene and β‐carotene were found in the acerola fruit. β‐Carotene predominated with mean concentrations of 12.4 and 38.1 µg g^?1 in the ripe fruit, 8.8 and 30.1 µg g^?1 in the peeled ripe fruit and 5.4 and 12.0 µg g^?1 in the partially ripe fruit of an undefined variety taken from home gardens and the commercial cultivar Olivier, respectively. Aside from β‐carotene, β‐cryptoxanthin increased significantly in both garden and commercial fruits and violaxanthin in the latter fruits during ripening. Peeling reduced β‐carotene in both garden and commercial lots, violaxanthin decreased in the commercial fruits, and the other carotenoids remained virtually unchanged. Four brands of frozen pulp and three brands of processed juice had variable and markedly lower carotenoid levels than those of the fresh fruit, indicating that the processing should be improved. Copyright © 2006 Society of Chemical Industry     

Photoelectrocatalytic determination of NADH in a flow injection system with electropolymerized methylene blue

It was firstly described that a glassy carbon electrode electropolymerized with methylene blue shows an efficient photoelectrocatalytic activity towards NADH oxidation in a phosphate buffer solution (pH 7.0). In order to perform the photoelectrocatalytic determination of NADH in a flow injection analysis (FIA) system, a home-made flow electrochemical cell with a suitable transparent window for the irradiation of the electrode surface was constructed. The currents obtained from the photoamperometric measurements in the FIA system at optimum conditions (flow rate of carrier solution, 1.3 mL min⁻¹; transmission tubing length, 10 cm; injection volume, 100 μL; and constant applied potential, +150 mV vs. Ag/AgCl) were linearly dependent on the NADH concentration and linear calibration curves were obtained in the range of 1.0 × 10⁻⁷–2.0 × 10⁻⁴ M. The detection limit was found to be 4.0 × 10⁻⁸ M for photoamperometric determination of NADH.     

Kinetics of para-nitrophenol and chemical oxygen demand removal from synthetic wastewater in an anaerobic migrating blanket reactor

A laboratory scale anaerobic migrating blanket reactor (AMBR) was operated at different HRTs (1-10.38 days) in order to determine the para-nitrophenol (p-NP) and COD removal kinetic constants. The reactor was fed with 40 mg L(-1)p-NP and 3000 mg L(-1) glucose-COD. Modified Stover-Kincannon and Grau second-order kinetic models were applied to the experimental data. The predicted p-NP and COD concentrations were calculated using the kinetic constants. It was found that these data were in better agreement with the observed ones in the modified Stover-Kincannon compared to Grau second-order model. The kinetic constants calculated according to Stover-Kincannon model are as follows: the saturation value constant (K(B)) and maximum utilization rate constants (R(max)) were found as 31.55 g CODL(-1)day(-1), 29.49 g CODL(-1)day(-1) for COD removal and 0.428 g p-NPL(-1)day(-1), 0.407 g p-NPL(-1)day(-1) for p-NP removal, respectively (R(2)=1). The values of (a) and (b) were found to be 0.096 day and 1.071 (dimensionless) with high correlation coefficients of R(2)=0.85 for COD removal. Kinetic constants for specific gas production rate were evaluated using modified Stover-Kincannon, Van der Meer and Heerrtjes and Chen and Hasminoto models. It was shown that Stover-Kincannon model is more appropriate for calculating the effluent COD, p-NP concentrations in AMBR compared to the other models. The maximum specific biogas production rate, G(max), and proportionality constant, G(B), were found to be 1666.7 mL L(-1) day(-1) and 2.83 (dimensionless), respectively in modified Stover-Kincannon gas model. The bacteria had low Haldane inhibition constants (K(ID)=14 and 23 mg L(-1)) for p-NP concentrations higher than 40 mg L(-1) while the half velocity constant (K(s)) increased from 10 to 60 and 118 mg L(-1) with increasing p-NP concentrations from 40 to 85 and 125 mg L(-1).     

Tolerance,Adaptation, and Cell Response Elicited by Micromonospora sp. Facing Tellurite Toxicity: A Biological and Physical-Chemical Characterization

The intense use of tellurium (Te) in industrial applications, along with the improper disposal of Te-derivatives, is causing their accumulation in the environment, where oxyanion tellurite (TeO₃²⁻) is the most soluble, bioavailable, and toxic Te-species. On the other hand, tellurium is a rare metalloid element whose natural supply will end shortly with possible economic and technological effects. Thus, Te-containing waste represents the source from which Te should be recycled and recovered. Among the explored strategies, the microbial TeO₃²⁻ biotransformation into less toxic Te-species is the most appropriate concerning the circular economy. Actinomycetes are ideal candidates in environmental biotechnology. However, their exploration in TeO₃²⁻ biotransformation is scarce due to limited knowledge regarding oxyanion microbial processing. Here, this gap was filled by investigating the cell tolerance, adaptation, and response to TeO₃²⁻ of a Micromonospora strain isolated from a metal(loid)-rich environment. To this aim, an integrated biological, physical-chemical, and statistical approach combining physiological and biochemical assays with confocal or scanning electron (SEM) microscopy and Fourier-transform infrared spectroscopy in attenuated total reflectance mode (ATR-FTIR) was designed. Micromonospora cells exposed to TeO₃²⁻ under different physiological states revealed a series of striking cell responses, such as cell morphology changes, extracellular polymeric substance production, cell membrane damages and modifications, oxidative stress burst, protein aggregation and phosphorylation, and superoxide dismutase induction. These results highlight this Micromonospora strain as an asset for biotechnological purposes.     

Differential susceptibility to HIV-GP120-sensitized apoptosis in CD4+ T-cell clones with different T-helper phenotypes: role of CD95/CD95L interactions

The susceptibility of Th1 and Th2 cell clones to apoptosis following HIV-gp120/CD4 cross-linking and TCR activation was investigated. We show that only Th1 clones are susceptible to HIV-gp120-sensitized apoptosis, although both types of clones express similar levels of CD4 and bind similar amounts of recombinant gp120. Both types of clones, however, undergo apoptosis induced by CD95 cross-linking with agonistic monoclonal antibody (MoAb). Apoptosis induced by gp120 in the Th1 clones is inhibited by either an anti-CD95 neutralizing MoAb or an anti-CD95L neutralizing MoAb as well as by a specific interleukin-1 beta converting enzyme (ICE) inhibitor. When triggered to apoptosis by gp120, Th1 but not Th2 clones express both cell-associated and soluble CD95L. The CD95L produced by Th1 clones induces cell death, inhibitable by anti-CD95 neutralizing MoAb, of CD95 positive Jurkat cells. These data suggest that, like activation-induced apoptosis, HIV-gp120 sensitized apoptosis in Th1 clones occurs via CD95/CD95L interaction and that lack or insufficient production of CD95L is responsible, at least in part, for the resistance of Th2 clones to such apoptosis.     

Biomedical sensors in interventional systems: present problems andfuture strategies

The authors consider important problems in biomedical sensor development, including physical configuration, packaging connection to the remaining system, power supply, simultaneous sensing of multiple variables, signal processing, and costs. In addition to using conventional sensing technologies, biomedical sensors have recently incorporated microelectronic, signal processing, and optical techniques. Traditional sensing approaches have been used in ways, and novel technologies have been developed for biomedical sensors     

Sensor for measuring surface fluid conductivity in vivo

Thin-film microelectronic technology was used to fabricate a miniature, flexible sensor that can be placed directly onto the surface of the airway to measure the electrical conductance of the fluids present. Gold was deposited on glass, oxidized silicon, and polyimide substrates. The parallel gold electrodes were etched into an interdigitated configuration that increased the effective sensing area without increasing the sensor size. A temperature-sensitive resistor was added to make calculations possible to account for the effect of temperature on fluid conductivity. Fluid conductivity was measured and from this information osmolarity was calculated. Physiologic evaluation of the device and corroboration of the calculations was obtained by placing the sensor in the airway of mongrel dogs and simultaneously collecting surface fluids for atomic absorption spectroscopy and freezing-point-depression analysis. Osmolarity calculations made from the sensor data were consistently about 25% lower than clinical laboratory osmolarity analysis. In vitro tests of the sensor included calibration in multiple dilute salt solutions, temperature sensitivity assessment, and evaluation of the effects of solution concentration on electrical conductance.<>     

Effects of postchlorination on key product and processing properties of PVC

The behavior of PVC resins has been shown to change dramatically when postchlorinated from 57 to 70 percent chlorine. Many of these changes are beneficial: heat resistance, thermoformability, and combustion properties are improved to an extent that opens new market opportunities for properly formulated chlorinated PVC (CPVC) materials. Sharply increasing melt viscosity also results from increasing chlorine content, creating the need for compounding and processing expertise differing from that for rigid PVC. The fact that such expertise has been developed, and is constantly being improved, is expanding the use of CPVC.     

Interpreting Visual Versus Audio Messages in Television News

A three-way experimental design examined the relative power of visual, audio, and audiovisual television messages on people's learning of and feelings about political issues. Evidence from these experiments showed that audio alone is just as effective as a combined audio and visual presentation for conveying information, including the critical interpretation of a news story. Comparing results across stories demonstrated that encoding information in a narrative form enhanced learning from the visual track alone. In stark contrast with much of the accumulated findings on the affective impact of visuals, the results here show little difference between the affective responses to audio and video channels. Rather, subjects were most emotionally aroused by a combination of audio and visual channels, which is the essential character of television.