Simple Views on Metal/Oxide Interfaces: Contributions of the Long-Range Interactions to the Adhesion Energy

The image and van der Waals contributions to the metal/oxide work of adhesion are compared through the extent to which they follow the known prevalent trends, i.e. the increase in work of adhesion (a) with narrowing oxide band gap and (b) with increasing conduction electron density of the metal. The van der Waals interaction is shown to follow both trends, while the image term is suggested to be significant only for dense metals in contact with very ionic oxides. The relative contribution of these long-range interactions to the overall metal/oxide work of adhesion is found to be maximized for systems involving metals with low electronic densities and oxides with wide band gaps. At variance, high metallic electronic densities and narrow oxide gaps likely favour short-range interactions arising from charge transfer.     

Nanocomposite piezoelectric films of P(VDF‐TrFE)/LiNbO3

Piezoelectric films were prepared by incorporation of lithium niobate (LiNbO₃) nanoparticles into copolymer of vinylidene difluoride and trifluoroethylene. Nanoparticles of LiNbO₃ with ferroelectric phase were successfully synthesized and dispersed homogenously by ultrasonication in the copolymer matrix without any surfactant or surface functionalization. The nanocomposites were fully characterized by electronic microscopy, X‐ray diffraction, differential scanning calorimetry, dynamical mechanical analysis, and piezometer. Surprisingly, the copolymer matrix crystallinity and morphology were not affected by the incorporation of nanoparticles. Therefore the nanocomposites remained good mechanicals properties and high ferroelectricity coupled to nonlinear optical activity thanks to the noncentro symmetric space group of lithium niobate. This could be a novel approach to develop new multifunctional materials. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of transparent PMMA/Fe(IO3)3 nanocomposite films from microemulsion polymerization

Polymethyl methacrylate (PMMA)/Fe(IO₃)₃ nanocomposite thin films are obtained by in situ particle generation in microemulsions and subsequent photopolymerization of a mixture containing methyl methacrylate, trimethylolpropane triacrylate, and crystallized iron iodate (Fe(IO₃)₃) nanorods. Hyper‐Rayleigh scattering measurements combined with X‐ray diffraction, transmission electron microscopy, and dynamic light scattering are first used to probe in situ the crystallization kinetics of iron iodate nanorods in water‐in‐oil microemulsions prepared with methyl methacrylate as the oil phase and marlophen NP12 as a surfactant. Trimethylolpropane triacrylate is then added as a crosslinker before spin‐coating. Films are deposited on glass substrates for the nonlinear optical characterizations and on silicon wafers for the piezoelectric and mechanical measurements. Nanocomposite films treated by corona discharge are finally characterized through optical microscopy, laser Doppler vibrometry, and Brillouin spectroscopy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1203‐1211, 2013     

Influence of the amorphous phase molecular mobility on impact and tensile properties of polyamide 6,6

In this work, the relationship between molecular mobility of polyamide 6,6 amorphous phase and mechanical properties is studied. PA66 formulations having different glass transition temperatures (T_g) obtained by additivation, chemical modification of the polyamide chains, and/or water conditioning at different hygrometry levels, are considered. The main emphasis is put on the impact strength, as measured by instrumented Charpy impact tests over a broad temperature range. It is observed that the brittle‐tough transition temperature T_B/T is closely correlated with the T_g of the samples rather than to the β secondary relaxation. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43457.     

Investigation of the Sintering of Heterogeneous Powder Systems by Synchrotron Microtomography and Discrete Element Simulation

Collective particle behavior such as interparticle coordination and particle rearrangement plays a significant role in the sintering of heterogeneous powder systems. Those phenomena have been investigated by in situ X-ray microtomography and discrete element simulation (DEM). In situ 3D images of sintering copper-based systems have been obtained at the European Synchrotron Research Facilities. The sintered systems comprise a dense packing of atomized copper powder with a size range of 0–63 μm and the same powder including artificial pores. Quantitative analysis of these images provided valuable data on local strain, coordination number, and particle movement. The sintering of the same systems has been simulated with the discrete element code dp3D. From this set of information, the importance of collective behavior on densification and microstructural evolution is assessed and the relevance of DEM to describe it is discussed.     

Densification and grain growth during solid state sintering of LaPO4

This work is devoted to the kinetic study of densification and grain growth of LaPO₄ ceramics. By sintering at a temperature close to 1500 °C, densification rate can reach up to 98% of the theoretical density and grain growth can be controlled in the range 0.6–4 μm. Isothermal shrinkage measurements carried out by dilatometry revealed that densification occurs by lattice diffusion from the grain boundary to the neck. The activation energy for densification (E_D) is evaluated as 480 ± 4 kJ mol⁻¹. Grain growth is governed by lattice diffusion controlled pore drag and the activation energy (E_G) is found to be 603 ± 2 kJ mol⁻¹. The pore mobility is so low that grain growth only occurs for almost fully dense materials.     

Potential influence of microorganisms on the corrosion of carbon steel in the French high- and intermediate-level long-lived radioactive waste disposal context

In the context of the high-level radioactive waste disposal CIGEO, the corrosion rate due to microbially influenced corrosion (MIC) has to be evaluated. In France, it is envisaged to dispose of high- and intermediate-level long-lived radioactive waste at a depth of 500 m in a deep geological disposal, drilled in the Callovo-Oxfordian claystone (Cox) formation. To do so, a carbon steel casing will be inserted inside disposal cells, which are horizontal tunnels drilled in the Cox. A specific cement grout will be injected between the carbon steel casing and the claystone. A study was conducted to evaluate the possibility of MIC on carbon steel in the foreseeable high radioactive waste disposal. The corrosiveness of various environments was investigated at 50°C and 80°C with or without microorganisms enriched from samples of Andra's underground research laboratory. The monitoring of corrosion during the experiments was ensured using gravimetric method and real-time corrosion monitoring using sensors based on the measurements of the electrical resistance. The corrosion data were completed with microbiological analyses including cultural and molecular characterizations.     

Stress corrosion cracking susceptibility of P285NH and API 5L X65 steel grades in the high-level radioactive waste repository cell concept

Since 2014, the concept developed for the disposal of high-level radioactive waste in the French deep geological repository project Cigéo includes a cement-based grout material. This cement-based grout material will be injected between the casing and the claystone to neutralize the potential acidity resulting from the claystone oxidation induced by the drilling process of the disposal cell. In these conditions of pH (around 10.5) and temperature (90°C, maximum expected during the disposal), the metallic materials could be sensitive to stress corrosion cracking (SCC). In this project, different environments (aerated or deaerated, at room temperature or at 90°C) and synthetic solutions are considered to reproduce the different periods expected during the long life repository. The project is based on electrochemical measurements (polarization curves to define the SCC critical domain of potentials), slow strain rate tensile tests, and long-term immersion for crack initiation and propagation tests.     

Mass Spectrometry-Based Proteomics Reveal Alcohol Dehydrogenase 1B as a Blood Biomarker Candidate to Monitor Acetaminophen-Induced Liver Injury

Acute liver injury (ALI) is a severe disorder resulting from excessive hepatocyte cell death, and frequently caused by acetaminophen intoxication. Clinical management of ALI progression is hampered by the dearth of blood biomarkers available. In this study, a bioinformatics workflow was developed to screen omics databases and identify potential biomarkers for hepatocyte cell death. Then, discovery proteomics was harnessed to select from among these candidates those that were specifically detected in the blood of acetaminophen-induced ALI patients. Among these candidates, the isoenzyme alcohol dehydrogenase 1B (ADH1B) was massively leaked into the blood. To evaluate ADH1B, we developed a targeted proteomics assay and quantified ADH1B in serum samples collected at different times from 17 patients admitted for acetaminophen-induced ALI. Serum ADH1B concentrations increased markedly during the acute phase of the disease, and dropped to undetectable levels during recovery. In contrast to alanine aminotransferase activity, the rapid drop in circulating ADH1B concentrations was followed by an improvement in the international normalized ratio (INR) within 10–48 h, and was associated with favorable outcomes. In conclusion, the combination of omics data exploration and proteomics revealed ADH1B as a new blood biomarker candidate that could be useful for the monitoring of acetaminophen-induced ALI.