High‐Pressure High‐Temperature Transparent Fixed‐Bed Reactor for Operando Gas‐Liquid Reaction Follow‐up

A 3‐MPa, 350 °C fixed‐bed reactor was designed to follow‐up gas‐liquid‐solid reactions on a millimetric size heterogeneous catalyst with Raman spectroscopy. The transparent reactor is a quartz cylinder enclosed in a Joule effect heated stainless‐steel tube. A methodology to determine how to focus the microscope for liquid and solid phase characterization is presented. The setup was validated by performing diesel hydrodesulfurization on a CoMo/alumina extrudate catalyst with a conversion very close to expected values along with the acquisition of Raman spectra of the solid catalyst showing an evolution of the catalyst phase during sulfidation.     

Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

Nanocomposite piezoelectric films of P(VDF‐TrFE)/LiNbO3

Piezoelectric films were prepared by incorporation of lithium niobate (LiNbO₃) nanoparticles into copolymer of vinylidene difluoride and trifluoroethylene. Nanoparticles of LiNbO₃ with ferroelectric phase were successfully synthesized and dispersed homogenously by ultrasonication in the copolymer matrix without any surfactant or surface functionalization. The nanocomposites were fully characterized by electronic microscopy, X‐ray diffraction, differential scanning calorimetry, dynamical mechanical analysis, and piezometer. Surprisingly, the copolymer matrix crystallinity and morphology were not affected by the incorporation of nanoparticles. Therefore the nanocomposites remained good mechanicals properties and high ferroelectricity coupled to nonlinear optical activity thanks to the noncentro symmetric space group of lithium niobate. This could be a novel approach to develop new multifunctional materials. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Pretreatment and physical activation of acetylene cokes

Pretreatment of acetylene cokes at 450 °C with a mixture of nitrogen, oxygen and water vapour creates a relatively large surface area and some initial microporosity, further developed by water activation at 800 °C. For the same degree of burn-off, but without pretreatment, large micropores (L > 2–3 nm) are obtained and the external surface area remains small.     

The European project trust—reconfigurable terminals and supporting networks

To date, research into reconfigurable mobile communications has predominantly focussed on the software radio concept, and specifically on the hardware technologies required to move physical layer processing into a programmable environment [1, 2, 3]. Although an interesting and necessary challenge, this only represents a fraction of the overall support and technology required to realise the potential of the concept. Other necessary developments include network/terminal cooperation for seamless inter-standard handoff, QoS management for software download and reconfiguration, a secure software download mechanism, terminal software and mobile radio network architecture supporting terminal reconfiguration, management for software downloads, configuration management, capability negotiation, radio resource management and spectrum allocation policies etc… This paper describes results from the EuropeanIst Trust (Transparently Reconfigurable UbiquitouS Terminal) [4] project concerning user and operator requirements, the proposed overall system environment, security issues, concerted radio resource management, and expected time frame for the development of reconfigurable terminals.     

On the relevance of non-standard theories of uncertainty in modeling and pooling expert opinions

Wu, Apostolakis and Okrent¹ have recently analyzed the current status of emerging alternatives to classical probabilistic methods in the modeling and pooling of expert opinions in safety analysis of engineering systems. They have pointed out some difficulties faced by these theories, due to their relative lack of maturity. This paper pursues the investigation so as to clarify some aspects of belief functions and possibility theories, and also to point out the need for further research. A comparison between the mathematical models of expert opinion pooling offered by Bayesian probabilities, belief functions and possibility theory is carried out. It is proved that the Bayesian approach that these authors advocate suffers from the same numerical stability problems as possibilistic and evidential rules of combination in the presence of strongly conflicting information due to their strong structural similarities. The problem of dependence between experts is briefly addressed. The other main point of this paper is that a single combination rule cannot reasonably address all situations where expert opinions must be pooled. It is suggested that the framework of possibility and evidence theories offers a more flexible framework for representing and combining subjective uncertain judgments than the one of subjective probability alone although some progress is required to reach the maturity of the Bayesian theory.     

Application of ultrafiltration to the preparation of defined hydrolysates of bovine haemoglobin

Many uses of protein hydrolysates have been developed and applied to areas such as nutritional therapy, culture media, and the isolation of biologically active peptides. All these applications need carefully controlled and characterized hydrolysates. In order to produce such a type of hydrolysate, it is possible to use haemoglobin which is a very well defined and constant protein source. Enzymic hydrolysis of haemoglobin by pepsin was carried out at pilot-plant scale in an ultrafiltration reactor with mineral membranes. The object was to obtain a reproducible, decolorized, salt-free enzymic hydrolysate. Two types of membranes were tested having 10000 dalton (M5 type) and 20000 dalton (M4 type) cut-offs. Little significant difference was observed in the final products when both types of membranes were used. Reproducibility of hydrolysates was verified by amino acid analysis and gel filtration chromatography. The haemoglobin hydrolysates produced contained more than 90% protein and are especially suitable for fine applications.     

Preliminary investigations of weak non-adiabatic effects in materials from simulations on model clusters

According to earlier work, excited electronic states, despite their very small concentrations in wide-gap systems, might be involved in the initiation of energetic materials. To get further insight into the non-adiabatic electronic behaviour under intense mechanical perturbations, a simple approach is suggested, using finite clusters as models for materials. Preliminary calculations are carried out for isolated clusters undergoing vibrations. Electronic populations in excited states obtained from these simulations are much larger than expected on the basis of statistical mechanics. Therefore, an extension of the present scheme to the canonical NVT ensemble would be desirable.     

Characterization of PVA cryogel for intravascular ultrasound elasticity imaging

The present study characterizes the mechanical properties of polyvinyl alcohol (PVA) cryogel in order to show its utility for intravascular elastography. PVA cryogel becomes harder with an increasing number of freeze-thaw cycles, and Young's modulus and Poisson's ratio are measured for seven samples. Mechanical tests were performed on cylindrical samples with a pressure column and on a hollow cylinder with the calculation of an intravascular elastogram. An image of the Young's modulus was obtained from the elastogram using cylinder geometry properties. Results show the mechanical similitude of PVA cryogel with the biological tissues present in arteries. A good agreement between Young's modulus obtained from pressure column and from elastogram was also observed.