Evaluating card-based protocols in terms of execution time

International Journal of Information Security - Card-based cryptography is an attractive and unconventional computation model; it provides secure computing methods using a deck of physical cards....     

On arginine-based polyurethane-blends specific to vascular prostheses

Polymer blends based on Tecoflex™ and an experimental aliphatic polyurethane (HMDI-PCL-arginine stands for 4,4 (metylene-biscyclohexyl) isocyanate - poly (ε caprolactone) diol, SPUUR stands for segmented poly(urea)urethanes using amino acid of L-Arginine as chain extender) were obtained by solvent casting, and further studied by fourier transform infrared (FTIR) and Raman spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis, and X-ray diffraction (XRD). Their biological performances were assessed in terms of hemocompatibility and Human umbilical vein endothelial cell (HUVEC) cytotoxicity. Tensile properties of dumbbell specimens were compared to longitudinal and circumferential tensile properties of tubular vascular graft. FTIR showed that as the SPUUR content increased in the blend, absorptions at 2860 cm⁻¹ increased, carbonyl absorptions at 1724 cm⁻¹ broaden and the small peak at 2796 cm⁻¹, typical of Tecoflex™ disappeared. Raman spectroscopy showed that the low intensity carbonyl absorption at 1724 cm⁻¹ also increased with SPUUR content. DSC allowed detection of PCL soft segment melting (T_m = 50°C) in agreement with X-ray reflections at 21.3° and 23.6°, assigned to SPUUR. However, no improvements in thermal stability were detected by TGA by blending. The addition of SPUUR to Tecoflex™ improved hemocompatibility and HUVEC cytotoxicity. The vascular grafts performance showed that 40% SPUUR blends exhibited the highest force in the longitudinal test whereas 50% SPUUR blends showed the highest circumferential force. Pressure burst strength was higher than 1000 mmHg for all blends. Overall, these blends can be used for high caliber vascular grafts.     

Oxidation Behavior of Ni-3,6, 10 wt.% Al Alloys at 800°C

The oxidation behavior of Ni and Ni-3, 6, and 10Al alloys at 800°C in an N₂–O₂ gas mixture was investigated. The mass gain of each alloy depended on both the oxidation periods and Al content. NiO scale was formed on all alloy substrates accompanied by internal oxides of Al₂O₃. Many cavities were formed at the NiO/substrate interface at shorter oxidation times, and these cavities were found to be filled by metallic Ni(Al) from the matrix in the internal-oxidation zone by the development of internal oxides. The filling of cavities by Ni(Al) was more significant on higher Al alloys, which had a higher density of internal Al₂O₃. Once metallic Ni(Al) formed along the entire NiO/substrate interface, the oxidation kinetics became the same as pure Ni. It was concluded that pure Ni filling the cavities at the interface provided a diffusion path of Ni from the substrate to the NiO scale, and that controlled the oxidation kinetics.     

Fracture dynamics of sprayed and laser-glazed titania by an inverse processing of elastic waves

A new elastic wave (EW) or acoustic emission (AE) monitoring and signal processing system has been developed and used to elucidate the fracture behavior of sprayed and laser-glazed ceramic coatings. The system measures the minute surface displacements excited by the propagation of elastic waves. It enables elucidation of the fracture dynamics (fracture mode and kinetics) of stressed coatings. The surface displacement at the sensor position was computed by the convolution integral of an assumed source wave with the dynamic Green’s function until signals resembled the measured wave. This new signal processing method was used to determine the fracture strength and dynamics of microcracks in sprayed and laser-glazed titania subjected to four-point bending. It was found that mode II shear cracking along the interface between the coating and substrate occurred prior to mode I cleavage cracking. The fracture strength of laser-glazed titania was higher than that of as-sprayed titania in most cases; however, this depended on the coating structure. This article introduces the principle of source inversion processing of elastic waves, the monitoring system, laser glazing of sprayed titania, and experimental work on the fracture behavior of titania coatings.     

Simulation of ultrasonic-vibration drawing using the finite element method (FEM)

In ultrasonic-vibration drawing, wires are drawn while ultrasonic vibration is applied to a drawing die. Prior studies provide experimental proof that ultrasonic-vibration drawing reduces drawing resistance, improves lubrication and prevents wire breakage. In the future, ultrasonic-vibration drawing is expected to contribute to the drawing of difficult-to-draw materials and operations, such as shaped wires, ultrafine wires, and the wire drawing operation in semidry or dry condition. However, a detailed analysis and understanding of the mechanism of improvement is not possible on the basis of conventional experimental observations because the ultrasonic-vibration processing phenomenon occurs at high speed. Therefore, we attempted to understand the processing mechanism of ultrasonic-vibration drawing using the finite element method (FEM). ABAQUS was used for the FEM. Drawing force and stress–strain distributions in drawn wires were analyzed. From these studies, we quantitatively clarified the mechanism of improved drawing characteristics, such as decreased drawing force.     

Whole-body vibration exposure in sport: four relevant cases

This study investigates the whole-body vibration exposure in kite surfing, alpine skiing, snowboarding and cycling. The vibration exposure was experimentally evaluated following the ISO 2631 guidelines. Results evidenced that the most critical axis is the vertical one. The weighted vibration levels are always larger than 2.5 m/s² and the vibration dose values are larger than 25 m/s^1.75. The exposure limit values of the EU directive are reached after 8–37 min depending on the sport. The vibration magnitude is influenced by the athletes’ speed, by their skill level and sometimes by the equipment. The large vibration values suggest that the practice of sport activities may be a confounding factor in the aetiology of vibration-related diseases.     

A wide view auto‐stereoscopic 3D display with an eye‐tracking system for enhanced horizontal viewing position and viewing distance

This paper describes the development of auto‐stereoscopic three‐dimensional (3D) display with an eye‐tracking system for not only the X‐axis (right–left) and Y‐axis (up–down) plane directions but also the Z‐axis (forward–backward) direction. In the past, the eye‐tracking 3D system for the XY‐axes plane directions that we had developed had a narrow 3D viewing space in the Z‐axis direction because of occurrence of 3D crosstalk variation on screen. The 3D crosstalk variation on screen was occurred when the viewer's eye position moved back and forth along the Z‐axis direction. The reason was that the liquid crystal (LC) barrier pitch was fixed and the LC barrier was able to control the only barrier aperture position. To solve this problem, we developed the LC barrier that is able to control the barrier pitch as well as the barrier aperture position in real time, corresponding to the viewer's eye position. As a result, the 3D viewing space has achieved to expand up to 320–1016 mm from the display surface in the Z‐axis direction and within a range of ±267 mm in the X‐axis direction. In terms of the Y‐axis direction, the viewing space is not necessary to be considered, because of a stripe‐shaped parallax barrier.     

Learning Temperature Dynamics on Agar-Based Phantom Tissue Surface During Single Point CO $$_2$$ 2 Laser Exposure

Neural Processing Letters - This paper presents an approach to determine a model of superficial tissue temperature dynamics during continuous wave CO $$_2$$ laser irradiation. The main contribution...