Slot coating flows of non‐colloidal particle suspensions

Slot coating is used in the manufacturing of functional films, which rely on specific particle microstructure to achieve the desired performance. Final structure on the coated film is strongly dependent on the suspension flow during the deposition of the coating liquid and on the subsequent drying process. Fundamental understanding on how particles are distributed in the coated layer enables optimization of the process and quality of the produced films. The complex coating flow leads to shear‐induced particle migration and non‐uniform particle distribution. We study slot coating flow of non‐colloidal suspensions by solving the mass and momentum conservation equations coupled with a particle transport equation using the Galerkin/Finite element method. The results show that particle distribution in the coating bead and in the coated layer is non‐uniform and is strongly dependent on the imposed flow rate (wet thickness). © 2016 American Institute of Chemical Engineers AIChE J, 63: 1122–1131, 2017     

Ecofriendly modification of acetosolv lignin from oil palm biomass for improvement of PMMA thermo‐oxidative properties

The environmentally friendly esterification of acetosolv lignin (AL), obtained from pressed oil palm mesocarp fibers, is described, for the improvement of thermo‐oxidative properties of poly(methyl methacrylate) (PMMA) films. Acetylation of AL was performed in ecofriendly conditions using acetic anhydride in the absence of catalysts. Acetylated acetosolv lignin (AAL) was successfully obtained in only 12 min with a solvent‐free and catalyst‐free microwave‐assisted procedure. Lignins were characterized by Fourier transform infrared spectroscopy, size exclusion chromatography, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC), confirming the efficacy of the methodology employed. AL and AAL as fillers in different concentrations (1% and 5%) were added to PMMA films. The thermal and mechanical properties of the lignin‐incorporated films were analyzed by TGA, DSC, and dynamic mechanical analysis (DMA). The films incorporated with lignin and acetylated lignin presented initial degradation temperature (T_onset) and onset oxidative temperature (OOT) values higher than pure PMMA films, contributing thus to an enhancement of thermo‐oxidative stability of PMMA. The DMA analyses showed that incorporation of AL or AAL increased the storage modulus (E′) of PMMA films, but did not affect their glass‐transition temperatures (T_g). The results indicate the potential use of oil palm mesocarp lignin to enhance the thermo‐oxidative properties of PMMA without compromising its mechanical response. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45498.     

Thermal and mechanical properties of PES/PTFE composites and nanocomposites

Polyethersulphone/polytetrafluoroethylene (PES/PTFE) nanocomposites and composites were prepared by precipitation of PES into a PTFE latex‐containing nanoparticles. Different samples were obtained by varying the relative ratio between PES and PTFE. The complex crystallization process, discussed within the fractionated crystallization frame, allowed to identify and quantify different dispersion degree of the PTFE nanoparticles within the PES matrix. The different samples were thus divided into nanocomposite and composites. The effect of crystalline PTFE domains on the mobility of PES was investigated and discussed. The dynamic‐mechanical behavior was explained in terms of the particle aggregation state. The mechanical properties of the PES/PTFE composites were found to depend on both the dispersion and the concentration of the PTFE nanoparticles. In the glassy state the stiffness of the materials was found to increase with the dispersion degree, resulting higher for the nanocomposite with respect to composites. On the contrary, in the rubbery state the modulus was found proportional to the PTFE nanoparticles concentration, resulting higher in the composites with respect to the nanocomposite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3624–3633, 2013     

Indirect Determination of Hydroxyl Radicals in Fine Particle Mist Generated from an Odor Control Technology via HPLC

Size distribution analysis of microsized water particle mist generated from an odor control technology showed the majority of particles to be in the low micron range. The indirect detection and determination of hydroxyl radicals generated by their reaction with benzene to produce phenol was performed through UV-Vis spectrophotometry (UV-Vis) and high performance liquid chromatography (HPLC). These techniques gave verification of the presence of hydroxyl radical species in the water samples collected via this odor control technology. This technology is currently being utilized at various wastewater treatment plants.     

Molecular Characterization of a Lysophosphatidylcholine Acyltransferase Gene Belonging to the MBOAT Family in Ricinus communis L.

Acyl-CoA:lysophosphatidylcholine acyltransferase (LPCAT, EC 2.3.1.23) catalyzes acylation of lysophosphatidylcholine (lysoPtdCho) to produce phosphatidylcholine (PtdCho), the main phospholipid in cellular membranes. This reaction is a key component of the acyl-editing process, involving recycling of the fatty acids (FA) mainly at the sn-2 position of PtdCho. Growing evidences indicate that the LPCAT reaction controls the direct entry of newly synthesized FA into PtdCho and, at least in some plant species, it has an important impact on the synthesis and composition of triacylglycerols. Here we describe the molecular characterization of the single LPCAT gene found in the genome of Ricinus communis (RcLPCAT) that is homologous to LPCAT genes of the MBOAT family previously described in Arabidopsis and Brassica. RcLPCAT is ubiquitously expressed in all organs of the castor plant. Biochemical properties have been studied by heterologous expression of RcLPCAT in the ale1 yeast mutant, defective in lysophospholipid acyltransferase activity. RcLPCAT preferentially acylates lysoPtdCho against other lysophospholipids (lysoPL) and does not discriminates the acyl chain in the acceptor, displaying a strong activity with alkyl lysoPL. Regarding the acyl-CoA donor, RcLPCAT uses monounsaturated fatty acid thioesters, such as oleoyl-CoA (18:1-CoA), as preferred donors, while it has a low activity with saturated fatty acids and shows a poor utilization of ricinoleoyl-CoA (18:1-OH-CoA). These characteristics are discussed in terms of a possible role of RcLPCAT in regulating the entry of FA into PtdCho and the exclusion from the membranes of the hydroxylated FA.     

Iron concentration and acceptation of yoghurt prepared in casting iron pots (iron migration and acceptation of yogurt)

Food fortification is an interesting strategy to treat and prevent iron anemia. This study aims to quantify the iron in yoghurt, with gelatin and sugar and without, prepared in iron and glass containers. Sensorial test was use to evaluate the acceptance and preference of the both products. The yoghurt was prepared in containers of iron and glass with UHT milk, powder milk and natural industrialized yoghurt. After fermentation, half of the product received addition of sugar and strawberry flavor gelatin. The collected samples get the total iron quantified by ICP OES. Sensorial analysis involving 105 consumers was use to determine the acceptance and preference of the products. 0,018 and 0,882mg of iron per 100g added in the natural yoghurt prepared in the glass and in the iron pots, respectively. The yoghurt with gelatin presented 0,037 and 1,302mg of iron per 100g when prepared in the glass and in the iron pots, respectively. The preference was low for the yoghurt prepared in the iron pot (29,5%), but when added strawberry gelatin it was about 51,5%. The yoghurt prepared in iron pots, is easily home made and adds important amount of iron. Add gelatin and sugar can favored its consumption.     

H2S retention with Ca-based sorbents in a pressurized fixed-bed reactor: application to moving-bed design

The H₂S retention with Ca-based sorbents in a pressurized fixed-bed reactor (1 MPa) has been analyzed, obtaining the breakthrough curves with a dolomite and two different limestones, different particle size (+0.8-1.0, +1.25-1.6, and +1.6-2.0 mm), and both at calcining (1173 K) and non-calcining conditions (1123 K). The effect of the stoichiometric time in the breakthrough curves has been analyzed varying the bed length, the gas velocity and the sorbent fraction in the bed. From these results, the conversion and H₂S concentration profiles in the transition zone and the length of unused bed (LUB) have been determined. H₂S retention in fixed-bed until concentration close to the given by the thermodynamic equilibrium was obtained using dolomite or limestone at calcining conditions, and dolomite at non-calcining conditions. The results of H₂S retention in a fixed-bed reactor has been applied to the calculus of the minimum height of a countercurrent moving-bed reactor to obtain the maximum H₂S retention with the minimum amount of sorbent. A mathematical model was developed to predict the experimental results obtained in the fixed-bed reactor, which was also valid for the design of countercurrent moving-bed reactors for gas desulphurization.