Preparation of Iron Filler-Based Photocomposites and Application in 3D Printing

The introduction of metallic fillers to polymers via the photopolymerization approach can endow the composite materials with some unique properties, but the relevant research is still scarce due to the issue of light penetration and inner filter effect. Herein, for the first time the fabrication of photocomposites based on fine iron powder (i.e., a typical kind of metallic filler) is reported in this work. The free radical polymerization of two different acrylate monomers, poly(ethylene glycol) diacrylate and trimethylolpropane triacrylate, is performed in the presence of iron filler under mild conditions (i.e., light emitting diode (LED)@405 nm irradiation at room temperature under air). And the real-time Fourier transform infrared spectroscopy reveals remarkable photopolymerization kinetics of acrylates with high final conversions and fast polymerization rates despite the increasing contents of iron filler in the composites. Interestingly, the 3D printing technique is applied to the iron filler-based composites to produce tridimensional patterns with excellent spatial resolution. This work not only paves the way for the investigation of photocomposites based on metallic fillers through photochemical methods, but also broadens the potential application prospects.     

3D Printing Conductive Composites with Poly(ionic liquid) as a Noncovalent Intermedia to Fabricate Carbon Circuits

In this study, a kind of imidazole type poly(ionic liquid) ([PEP-MIM]Cl) is synthesized, which can disperse carbon effectively. [PEP-MIM]Cl is used as an intermediate to coat carbon on the poly(acrylic acid)(PAA-co-MBA) via ion exchange to obtain conductive polymer composite (CPC). A series of characterizations are performed. Experiments show that carbon can be coated on the PAA-co-MBA uniformly, and compared with using carbon as filler, this method requires less carbon to achieve good conductive performance. The carbon layer on the polymer's surface is enriched via the swelling-shrinking properties of PAA-co-MBA according to the SEM images. Furthermore, in combination with 3D printing technology, PAA-co-MBA can be designed into different shapes to achieve various functions such as pressure-sensing element. Finally, a new type of CPC named carbon clad polymeric laminate (CCPL) is prepared by using the carbon coating method and 3D printing technology. It has the potential to replace copper clad laminate (CCL) and printed circuit board (PCB), to a certain extent. This technology expands the preparation method and application of the CPC such as flexible and wearable conductive fabrics.     

Correction to: Bismuth Yttrium Oxide (Bi3YO6), A New Electrode Material For Asymmetric Aqueous Supercapacitors

Journal of Inorganic and Organometallic Polymers and Materials - The original version of this article unfortunately contained mistakes. In line 9 of the abstract, 5% should read as 2%. The...     

砂岩翻砂废砂在水泥生料配料中的应用

我公司拥有2×2 500 t/d新型干法水泥生产线,在生产中逐步以废砂来替代砂岩进行生料配料,本文探讨了废砂的使用对水泥生产过程、熟料质量性能以及成本效益等方面的影响。结果表明：使用废砂替代砂岩进行水泥生料配料煅烧硅酸盐水泥熟料,未对熟料煅烧过程及熟料性能产生不良影响,烟气排放指标和熟料质量技术指标均符合国家标准要求。按我公司目前年产熟料110万t、掺加量按5.8%计算,年消耗废砂约10.0万t,每年节约成本约100万元,经济效益明显。     

Effect and Evolution of Oxide Film in the HDH-Ti Powder Surface on Densification Behavior During Sintering

Metallurgical and Materials Transactions A - In this work, we used hydride-dehydride Ti (HDH-Ti) powders (with the oxygen levels of 0.17 and 0.51 wt pct, respectively) combined with microstructural...     

耐腐蚀高压柱塞泵用新型双相不锈钢的研究

叙述了新型双相不锈钢－ＷＳＤ钢的组织及其耐蚀性能。试验结果表明，ＷＳＤ钢在氯化物介显示出优异耐蚀性能，其抗点蚀性能远超过Ｃｒ１３，１８－８Ｔｉ，３１６Ｌ等钢种，达到国外Ａｌ－６Ｘ，ＳＡＦ２２０５等钢种的水平。     

陶瓷喷砂嘴的冲蚀磨损特性及其损坏机理

采用热压烧结工艺制备了Al2O3/TiC、Al2O3/(W,Ti)C和B4C陶瓷喷砂嘴.以SiC和Al2O3为冲蚀磨料进行了喷砂冲蚀试验.结果表明纯B4C陶瓷材料的烧结温度高、保温时间长、致密度低、晶粒粗,抗弯强度和断裂韧性低,但硬度最高;而Al2O3/TiC和Al2O3/(W,Ti)C陶瓷材料的烧结温度和保温时间比纯B4C陶瓷大大减小,致密度高,抗弯强度和断裂韧性比纯B4C陶瓷高1倍以上,但硬度相对低.对陶瓷喷砂嘴在磨料冲蚀下的应力状态进行了有限元分析,结果表明陶瓷喷嘴入口处所受的应力最大,出口次之,中间区域最小.B4C陶瓷喷砂嘴的最佳入口锥角为11°,而Al2O3/(W,Ti)C陶瓷喷砂嘴的最佳入口锥角为16°.陶瓷喷嘴入口和出口处的磨损机理主要表现脆性断裂;而中间区域的磨损机理主要表现为磨料颗粒对喷嘴内壁表面的研磨、抛光和微切削作用.     

纺机织轴边盘的金属型低压铸造

介绍了采用金属型低压铸造生产边盘所涉及的设备、模具、工艺 ,并对产品质量和经济效益进行了分析     

冲压件CAPP系统中几何信息提取实现

基于对AutoCAD的DXF文件格式的详细分析，充分利用多义线的表达简洁性优点，并结合冲压件自身特点，提出了冲压件几何信息获取的方法及程序框架，详细说明了几何信息库的创建方法，并进一步采用Delphi6．0语言编程，实现了冲压几何信息库的建立和几何信息自动提取。     

半导体硫化银纳米管的制备与光学性能

在以Triton X-100为表面活性剂形成的反相胶束体系中,成功地制备了半导体硫化银纳米管,管径88 nm～120nm、长度大于2.6 μm.X射线衍射测定表明,产物为纯单斜结构.紫外-可见光谱在275 nm处发现新的吸收峰,最大发射波长与体相材料相比,蓝移了38 nm.