Structural mechanisms leading to improved water retention in acid milk gels by use of transglutaminase

Water retention in transglutaminase (TG)-treated acid milk gels was studied and linked with the gel formation dynamics. Heat-treated skim milk with and without pre-treatment by TG was acidified at 20 °C, 30 °C and 40 °C at constant glucono-δ-lactone (GDL) level to obtain different acidification rates. Formation dynamics and structural properties of acid-induced gels were followed by rheological and near-infrared light backscattering measurements as well as microscopy. TG-treated gels showed decreased tan δ values all through the acidification, which was pronounced around the gelation point. Backscattered light intensity was lowered in TG-treated gels compared to the controls indicating that TG-treated gels were comprised of smaller aggregates. Water holding capacity (WHC) was measured by using centrifugation at selected pH points (pH 5.2, 5.0, 4.8 and 4.6) during acidification. Both acidification temperature and TG treatment had significant effects on the water retention properties of the gels. Spontaneous syneresis observed at high acidification temperatures (≥30 °C) was prevented upon TG-treatment. WHC of TG-treated gels was significantly higher compared to the control gels at all pH points. TG-treated milk gels showed a homogeneous network formed of smaller aggregate and pore sizes at the gelation point and did not show any large-scale re-organisation thereafter. Transglutaminase is likely to act as a fixative of the protein network at an early stage of gelation and thereby limiting network rearrangements that take place in acid milk gels formed at high acidification temperatures leading to contraction and subsequent wheying off.     

Determination of antimicrobial effect of mint and basil essential oils on survival of E. coli O157:H7 and S. typhimurium in fresh-cut lettuce and purslane

In this research, mint and basil essential oils at concentrations of 0.01 ml/L, 0.032 ml/L or 0.08 ml/L were used for disinfection treatments of fresh-cut lettuce and purslane samples inoculated with Salmonella typhimurium or Escherichia coli 0157:H7. Disinfection treatment time was applied as 10 min (short) or 15 min (long). Disinfected samples were packaged aerobically and stored at refrigerator +4 °C for 7 days. It was observed that mint and basil essential oils showed antimicrobial effect on the survival of E. coli O157:H7 and S. typhimurium inoculated into lettuce and purslane samples during refrigerated storage. Mint essential oil showed higher antimicrobial effect on pathogens when compared to basil essential oil. Mint and basil essential oils at concentration of 0.08 ml/L were the most effective antimicrobial treatment against pathogens in two different vegetable. S. typhimurium was more resistant against basil oil in lettuce samples when compared to its resistance against basil oil in purslane samples, whereas E. coli O157:H7 was more resistant to mint oil in purslane samples when compared to its resistance against mint oil in lettuce samples.     

Can primary failure of arteriovenous fistulas be anticipated?

Primary failure, early thrombosis, and inadequate maturation are the main complications encountered in arteriovenous fistulas. Doppler ultrasonographic assessment of flow‐mediated dilatation (FMD) is currently used for the early diagnosis of atherosclerosis. Clinical experience in the use of FMD for preoperative assessment of vasculature is rather limited; therefore, we sought to elucidate the relationship between preoperative FMD and primary failure of the fistula. Thirty‐three patients with end‐stage renal disease who were admitted to our hospital between January and July 2005 were included in our study. Medical histories were established and the internal diameter, wall thickness, peak systolic flow rate, and resistive index (RI) were measured in the cephalic vein and radial and brachial arteries. Flow‐mediated dilatation and nitrate‐mediated dilatation (NMD) of the brachial artery were assessed. Fistulas were evaluated 48 hours and 30 days postoperatively. Brachial arterial internal diameter was lower in all fistulas that developed primary failure in 48 hours (0.4 ± 0.07 cm vs. 0.35 ± 0.07 cm, P = 0.016). The radial artery RI was found to be significantly elevated in fistulas with both early (48‐hour) and late‐term (30‐day) failure (0.9 ± 0.08 vs. 0.68 ± 0.3, P = 0.01, and 0.86 ± 0.8 vs. 0.67 ± 0.3, P = 0.038, respectively). The brachial artery peak systolic flow rate was significantly reduced in patients in the radiocephalic fistula group that developed early and late‐term failure (42.9 ± 12 cm/sec vs. 68.4 ± 10 cm/sec, P = 0.01, and 44.1 ± 13 cm/sec vs. 57.7 ± 16 cm/sec, P = 0.038, respectively). Our study, constrained by a smaller, older patient group, was unable to show a statistically significant correlation between FMD, NMD, and fistula success. Any single parameter may not be sufficient to assess vascular health preoperatively. A multifactorial approach incorporating parameters evaluating arterial and venous function might be more effective in predicting fistula success. Further studies on larger patient groups may indeed demonstrate the value of these assessments.     

Corn gluten hydrolysis by Alcalase: Calibration of pH-stat

In the present study, pH-stat method was calibrated by TNBS and OPA reactions for control of hydrolysis of corn gluten by Alcalase. Hydrolysis experiments were conducted in a batch reactor at the temperature of 50 °C for various pH values, and at pH 7 for 40 and 60 °C. The calibration was characterized by good linear correlations for both methods. The mean pK values of corn gluten hydrolysates were obtained as 6.83, 6.59 and 6.36 for 40, 50 and 60 °C, respectively.     

Evaluation of sericin/collagen membranes as prospective wound dressing biomaterial

Sericin, a silk protein, has high potential for use in biomedical applications. In this study, wound dressing membranes of Sericin (S) and Collagen (C) were prepared by glutaraldehyde cross-linking at S/C; 2:1, 1:1, 1:2, and 0:1 weight ratios. They were stable in water for 4 weeks. However, increasing the proportion of sericin had decreasing effect on the membrane stability. Water swelling property of membranes was enhanced with sericin. The highest water swelling was obtained in 1:1 group (9.06 g/g), but increasing collagen or sericin content in the membranes had a diminishing effect. Highest water vapor transmission rate was obtained with 1:2 group (1013.80 g/m²/day). Oxygen permeability results showed that 1:2 (7.67 mg/L) and 2:1 (7.85 mg/L) S/C groups were better than the other groups. While sericin decreased the tensile strength and elongation of membranes, it increased modulus. Sericin also increased brittleness of membranes, but their UTS range (24.93–44.92 MPa) was still suitable for a wound dressing. Membranes were not penetrable to microorganisms. Cytotoxicity studies showed that fibroblasts and keratinocytes attached and gained their characteristic morphologies. They also proliferated on membranes significantly. After 1 week of subcutaneous implantation, a fibrous capsule formed around all membranes with an acute inflammation. Sericin containing membranes showed signs of degradation (at 2nd week), while collagen only membranes remained largely intact. Eventually, sericin containing membranes degraded in 3 weeks with moderate inflammatory response. Overall results suggest that sericin/collagen membranes would be favorable as wound dressing material when sericin ratio is less than or equal to the collagen component.     

A kinetic study on sesame cake protein hydrolysis by Alcalase

In the present study, the hydrolysis of sesame cake protein was performed by Alcalase, a bacterial protease produced by Bacillus licheniformis, to investigate the reaction kinetics of sesame cake hydrolysis and to determine decay and product inhibition effects for Alcalase. The reactions were carried out for 10 min in 0.1 L of aqueous solutions containing 10, 15, 20, 25, and 30 g protein/L at various temperature and pH values. To determine decay and product inhibition effects for Alcalase, a series of inhibition experiments were conducted with the addition of various amounts of hydrolysate. The reaction kinetics was investigated by initial rate approach. The initial reaction rates were determined from the slopes of the linear models that fitted to the experimental data. The kinetic parameters, K(m) and V(max), were estimated as 41.17 g/L and 9.24 meqv/L x min. The Lineweaver-Burk plots showed that the type of inhibition for Alcalase determined as uncompetitive, and the inhibition constant, K(i), was estimated as 38.24% (hydrolysate/substrate mixture). Practical Application: Plant proteins are increasingly being used as an alternative to proteins from animal sources to perform functional roles in food formulation. Knowledge of the kinetics of the hydrolysis reaction is essential for the optimization of enzymatic protein hydrolysis and for increasing the utilization of plant proteins in food products. Therefore, in the present study, the hydrolysis of sesame cake protein was performed by Alcalase, a bacterial protease produced by B. licheniformis, to investigate the reaction kinetics of sesame cake hydrolysis and to determine decay and product inhibition effects for Alcalase.     

Anodic behaviour of fulvestrant and its voltammetric determination in pharmaceuticals and human serum on highly boron-doped diamond electrode using differential pulse adsorptive stripping voltammetry

The electrochemical oxidation of fulvestrant was made on highly boron-doped diamond electrode using differential pulse adsorptive stripping voltammetry. The highest current intensities were obtained by applying +1.10 V during 150 s for boron-doped diamond electrode. For boron-doped diamond electrode, linear responses were obtained for the concentrations between 1 × 10⁻⁶ and 8 × 10⁻⁵ M in standard samples and between 1 × 10⁻⁶ and 4 × 10⁻⁵ M in serum samples. The repeatability of the method was 0.55 RSD% for differential pulse adsorptive stripping voltammetry. The analytical values of the method are demonstrated by quantitative determination of fulvestrant in pharmaceutical formulations and human serum, without the need for separation or complex sample preparation, since there was no interference from the excipients and endogenous substances. Selectivity, reproducibility, and accuracy of the developed methods were demonstrated by recovery studies.     

Failure analysis of an aircraft piston engine components

In this study, failed parts from the piston engine of TB-20 Trinidad aircraft which declared an emergency landing to Anadolu University Airport, Eski?ehir, Turkey due to the overspeed of propeller during a training flight were investigated. Fortunately, landing was successful, however, most of the engine parts were found to be damaged. Some of the failed parts such as propeller governor idler gear and cam followers were examined by using a variable pressure scanning electron microscope (SEM) attached with an energy dispersive X-ray spectrometer (EDX) to identify the cause of failure in the engine.     

An investigation of agricultural use potential of wastewater sludges in Turkey--case of heavy metals.

Landfilling is one of the most common methods that are used in the final disposal of sludge world wide, as well as in Turkey. However, increasing sludge quantities and limited landfilling areas make this method difficult to apply. The use of sludge in agriculture presents a possible alternative for disposal. However, it also poses some risks to be evaluated. In this respect, it is important to identify the heavy metal content of sewage sludges because of its adverse health effects. This study aims to determine the heavy metal contents of sludges and wastewaters from three different wastewater treatment plants in Turkey. The selection of plants was carried out according to the different treatment technologies applied to wastewater and sludge in those plants. Heavy metal analysis of sludges and wastewaters was conducted using a microwave assisted digestion procedure. After sampling and analysis, the results show that all the related metal concentrations are below the values that are set in the Soil Pollution Control Regulation of Turkey. However, in two of the three plants, Zn and Ni concentration should be tracked carefully.     

Preparation and characterization of ethylenediamine and cysteamine plasma polymerized films on piezoelectric quartz crystal surfaces for a biosensor

This paper describes a method for the modification of quartz crystal surfaces to be used as a transducer in biosensors that allow recognition and quantification of certain biomolecules (antibodies, enzymes, proteins, etc). Quartz crystal sensors were modified by a plasma based electron beam generator in order to detect the level of the toxin histamine within biological liquids (blood, serum) and food (wine, cheese, fish etc.). Cysteamine and ethylenediamine were used as precursors in the plasma. After each modification step, the layers on the quartz crystal were characterized by frequency measurements. Modified surfaces were also characterized by contact angle, X-ray photoelectron spectroscopy and atomic force microscopy to determine the physical and chemical characteristics of the surfaces after each modification. Finally, the performance of the sensors were tested by the response to histamine via frequency shifts. The frequency shifts of the sensors prepared by plasma polymerization of ethylenediamine and cysteamine were approximately 3230 Hz and 5630 Hz, respectively, whereas the frequency change of the unmodified crystal surface was around 575 Hz.