Atrial Fibrillation: Pathogenesis,Predisposing Factors,and Genetics

Atrial fibrillation (AF) is the most frequent arrhythmia managed in clinical practice, and it is linked to an increased risk of death, stroke, and peripheral embolism. The Global Burden of Disease shows that the estimated prevalence of AF is up to 33.5 million patients. So far, successful therapeutic techniques have been implemented, with a high health-care cost burden. As a result, identifying modifiable risk factors for AF and suitable preventive measures may play a significant role in enhancing community health and lowering health-care system expenditures. Several mechanisms, including electrical and structural remodeling of atrial tissue, have been proposed to contribute to the development of AF. This review article discusses the predisposing factors in AF including the different pathogenic mechanisms, sedentary lifestyle, and dietary habits, as well as the potential genetic burden.     

Production of hydrogen for fuel cells by steam reforming of ethanol over supported noble metal catalysts

The catalytic performance of supported noble metal catalysts for the steam reforming (SR) of ethanol has been investigated in the temperature range of 600–850 °C with respect to the nature of the active metallic phase (Rh, Ru, Pt, Pd), the nature of the support (Al₂O₃, MgO, TiO₂) and the metal loading (0–5 wt.%). It is found that for low-loaded catalysts, Rh is significantly more active and selective toward hydrogen formation compared to Ru, Pt and Pd, which show a similar behavior. The catalytic performance of Rh and, particularly, Ru is significantly improved with increasing metal loading, leading to higher ethanol conversions and hydrogen selectivities at given reaction temperatures. The catalytic activity and selectivity of high-loaded Ru catalysts is comparable to that of Rh and, therefore, ruthenium was further investigated as a less costly alternative. It was found that, under certain reaction conditions, the 5% Ru/Al₂O₃ catalyst is able to completely convert ethanol with selectivities toward hydrogen above 95%, the only byproduct being methane. Long-term tests conducted under severe conditions showed that the catalyst is acceptably stable and could be a good candidate for the production of hydrogen by steam reforming of ethanol for fuel cell applications.     

Qualitative assessment of RANS models for Hypervapotron flow and heat transfer

The power densities present within a fusion device and its heating systems require the use of high heat flux (HHF) devices to sustain power densities >10 MW/m² in steady state. One such device, known as the Hypervapotron, uses internal water cooling along with a series of fins and cavities perpendicular to the flow to maximise the heat transfer capability. UKAEA, in collaboration with Cranfield University, have initiated a study whereby computational fluid dynamics (CFD) software will be used to predict the variation of heat transfer coefficients (HTC) throughout the Hypervapotron, allowing accurate calculations of both thermal and thermo-mechanical performance. In this paper, the first steps in this process are presented. In particular, different turbulence models are assessed and best practices identified for predicting single phase flow and heat transfer within Hypervapotron-sized cavities.     

三倍体毛白杨KP法蒸煮中木素结构的变化

以三倍体毛白杨为研究对象,进行了常规硫酸盐法蒸煮。采用酶-弱酸解两段法分别从原料和KP纸浆中分离出原料木素和纸浆残余木素。采用酸析法从KP蒸煮黑液中分离出溶出木素样品,经过弱酸水解得到纯木素试样。通过凝胶渗透色谱分析(GPC),对所有试样分别进行了分子质量的检测,得出各种木素样品的分子质量及其分布,分析了木素溶出过程中的分子质量的变化。通过磷谱核磁共振31P-NMR技术得出木素结构谱图,对原料木素、纸浆残余木素和黑液溶出木素结构中各官能团进行了定量分析对比,研究了木素结构在KP蒸煮过程中的变化规律。     

On-the-Fly Reseeding: A New Reseeding Technique for Test-Per-Clock BIST

In this paper we present a new reseeding technique for test-per-clock test pattern generation suitable for at-speed testing of circuits with random-pattern resistant faults. Our technique eliminates the need of a ROM for storing the seeds since the reseeding is performed on-the-fly by inverting the logic value of some of the bits of the next state of the Test Pattern Generator (TPG). The proposed reseeding technique is generic and can be applied to TPGs based on both Linear Feedback Shift Registers (LFSRs) and accumulators. An efficient algorithm for selecting reseeding points is also presented, which targets complete fault coverage and allows to well exploiting the trade-off between hardware overhead and test length. Using experimental results we show that the proposed method compares favorably to the other already known techniques with respect to test length and the hardware implementation cost.     

Highly Efficient Rapid Annealing of Thin Polar Polymer Film Ferroelectric Devices at Sub‐Glass Transition Temperature

An unexpected rapid anneal of electrically active defects in an ultrathin (15.5 nm) polar polyimide film at and below glass transition temperature (T_g) is reported. The polar polymer is the gate dielectric of a thin‐film‐transistor. Gate leakage current density (J_g) through the polymer initially increases with temperature, as expected, but decreases rapidly at T_g ? 60 °C. After ≈2 min at T_g, the leakage is reduced by nearly three orders of magnitude. A concomitant observation is that the drain current (I_d)–gate voltage (V_g) hysteresis decreases with temperature, reaching zero at nearly the same temperature at which J_g collapses. As J_g drops further, the drain current hysteresis increases again but in the opposite direction. This combination strongly supports the interpretation of rapid defect annealing.     

Phosphate application to firing range soils for Pb immobilization: the unclear role of phosphate

Phosphate treatment has emerged as a widely accepted approach to immobilize Pb in contaminated soils and waste media, relying on the formation of the highly insoluble mineral pyromorphite as solubility-controlling phase for Pb. As such, phosphate treatment has been proposed as a Best Management Practice (BMP) for firing ranges where Pb occurs in its metallic forms and several other phases (carbonates, oxides). While pyromorphite thermodynamically has the potential to control Pb solubility at low levels, its formation is kinetically controlled by pH, the solubility of the phosphate source, and the solubility of Pb species. Treatability studies have shown that excess quantities of soluble and acidic phosphate sources, such as phosphoric acid, are necessary for successful in situ treatment. Even under these conditions, Extended X-ray Absorption Fine Structure (EXAFS), the only reliable method to identify and quantify Pb speciation, showed that Pb conversion to pyromorphite in in situ treated soils was less than 45% after 32 months. Furthermore, the use of lime (CaO) to restore soil pH in acidified soil treatments inhibited further conversion. Additionally, phosphate treatment is known to reduce bioavailability through pyromorphite formation in the intestinal tract, and the phytoaccumulation of Pb; both desirable effects for Pb-impacted areas. Given the costs of phosphate treatment, the use of biogenic phosphate sources, such as bone meal, may be a more environmentally sustainable approach toward this end. In the many studies focusing on phosphate treatment, the attendant P leaching and eutrophication have been largely overlooked, along with other issues such as the enhanced leaching of oxyanionic contaminants, such as Se, As and W. The success and sustainability of applying phosphate as a BMP in firing range soils therefore remain questionable.     

Application of the Rietveld method to assess chromium(VI) speciation in chromite ore processing residue

The Rietveld method allows the quantification of crystalline phases and amorphous material identified by X-ray powder diffraction (XRPD) and other diffraction methods. The method assists in determining the speciation of contaminants in solid matrices both qualitatively and quantitatively in a statistically defensible approach, as it does not focus on a microscale. Rietveld was applied to chromite ore processing residue (COPR), a cementitious waste containing hexavalent chromium. Calcium aluminum chromium oxide hydrates (CACs) were the crystalline phases identified by XRPD that bind Cr(6+) in COPR according to their chemical formula. Rietveld quantification, combined with mass balances on Cr(6+), showed that CACs may bind Cr(6+) in variable percentages, ranging from 25% to 85%. Analysis of duplicate samples showed that material variability is the predominant factor of uncertainty in evaluating the role of CACs in Cr(6+) speciation, provided that a consistent quantification strategy is pursued. The choice of strategy was performed on the basis of the pertinent literature, preliminary analyses of the equipment and the software settings, and mass balances. The correlation between the average CAC-bound Cr(6+) concentration and the total Cr(6+) for five samples (R(2)=0.94), extracted from different zones and soil borings, suggests that CACs are a primary sink for Cr(6+) in COPR.     

Development of surrogate models for the prediction of the flow around an aircraft propeller

In the present work, the derivation of two surrogate models (SMs) for modelling the flow around a propeller for small aircrafts is presented. Both methodologies use derived functions based on computations with the detailed propeller geometry. The computations were performed using k–ω shear stress transport for modelling turbulence. In the SMs, the modelling of the propeller was performed in a computational domain of disk-like geometry, where source terms were introduced in the momentum equations. In the first SM, the source terms were polynomial functions of swirl and thrust, mainly related to the propeller radius. In the second SM, regression analysis was used to correlate the source terms with the velocity distribution through the propeller. The proposed SMs achieved faster convergence, in relation to the detail model, by providing also results closer to the available operational data. The regression-based model was the most accurate and required less computational time for convergence.     

Stress in interactive applications: analysis of the valence-arousal space based on physiological signals and self-reported data

Measuring users’ emotional reaction to interactive multimedia and hypermedia is important. One particularly popular self-reported method for emotion assessment is the Valence-Arousal (VA) Scale: a 9?×?9 affective grid. This paper aims to identify specific stress region(s) in the VA space by combining self-reported ratings (pairs of VA) and physiological signals (skin conductance). To this end, 31 healthy volunteers participated in an experiment by performing five stressful interaction tasks while their skin conductance was monitored. The selected interaction tasks were most frequently listed as stressful by a separate group of 15 interviewees. After each task, participants expressed their perceived emotional experience using the VA rating space. Our findings show which regions in the VA rating space may reliably indicate self-reported stress that is in alignment with one’s measured skin conductance while using interactive applications. One additional important contribution of this work is the proposed approach for the empirical identification of affect regions in the VA space based on physiological signals.