Towards β-phase formation probability in spin coated PVDF thin films

This work aimed towards the study on variations in the percentage of β-phase in Poly vinylidene fluoride (PVDF) thin films deposited by spin coating technique. PVDF is a semi-crystalline polymer which exhibits α, β, γ and δ polymorphs. Among these polymorphs, generally it crystallizes in a non-polar α-phase, which is of little importance as far as its applications are concerned. However, the β-phase, which exhibits spontaneous polarity created tremendous interest and showed a path towards the devices based on its pyro- and piezoelectric properties. Fourier Transform Infrared (FTIR) spectroscopy and XRD techniques were used to study the percentage of formation of β-phase in spin coated PVDF thin films at different processing conditions viz. spin rotation speed (rpm), solution concentration and annealing temperature. We identified the β-phase percentage in PVDF thin films, which are (i) Deposited with different rotation speeds ranging from 1000 to 9000 rpm, (ii) Annealed at different temperatures viz.; room temperature to 100C, and (iii) Deposited at various solution concentrations. It is identified that percentage of formation of β-phase is high in the films deposited with 15(w/v)% solution concentration which is annealed at 100C. The films deposited at higher rpm is showing low enhancement in the β-phase with annealing temperature.     

KINETICS OF URANIUM EXTRACTION BY MACROPOROUS BIFUNCTIONAL PHOSPHINIC ACID RESIN

ABSTRACT

The rate of extraction of uranium by macroporous bifunctional phosphinic acid (MPBPA) resin from nitric acid medium has been studied under particle diffusion controlled conditions. The internal diffusion coefficient was found to increase with increase in temperature and decrease with increase in particle size. The activation energies and entropies suggest that the extraction of uranium essentially follows ion exchange mechanism at low concentration of nitric acid while it is through linkage of >P=0 group of the resin at high concentrations.     

NdFeAsO1−xFx Superconductor – Impact of Fluorine Variation on Microstructure and Transport Properties

Polycrystalline samples of NdFeAsO_1?xF_x (Nd1111) with x = 0, 0.1, 0.2, 0.3, and 0.4 were synthesized using a solid‐state method at ambient pressures. A maximum transition temperature (T_C) of 52.0 K and a J_C of 1050 A/cm² at 12 K were observed for x = 0.3 and 0.4, respectively. The transport and magnetic properties observed for each stoichiometry have remarkable correlation with their corresponding structural and microstructural aspects. Moreover, the superconducting properties exhibited in this material, processed at a relatively low temperature of 1000°C, are competitive as compared to the existing reports wherein high pressures/temperatures are inevitable.     

Study on glass transition temperature and mechanical properties of cadmium sulfide/polystyrene nanocomposites

The cadmium sulfide/polystyrene (CdS/PS) nanocomposites with concentration (0, 2, 4, 6, and 8) wt% of CdS nanoparticles were prepared by solution casting method and characterized through fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) measurements. The particle size of nanoparticles is found to be around 15 nm. Glass transition and mechanical behavior of CdS/PS nanocomposites were investigated using dynamic mechanical analyzer (DMA). The mechanical properties such as Young's modulus and tensile strength were determined at room, as well as at elevated temperatures through their stress–strain curves. The result shows that glass transition temperature (T_g) is shifted toward the higher temperature after the addition of CdS nanoparticles. The mechanical properties increased at low wt% loading of CdS nanoparticles and decreased for higher wt% loading of CdS nanoparticles. It was also found that mechanical properties decline with increase in the temperature. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Difference in the Nature of Eu3+ Environment in Eu3+‐Doped BaTiO3 and BaSnO3

BaTiO₃ and BaSnO₃ samples doped with Eu³⁺ ions were prepared using glycine‐nitrate gel combustion method. Relative intensities and line shapes of magnetic dipole allowed ⁵D₀ → ⁷F₁ and electric dipole allowed ⁵D₀ → ⁷F₂ transitions of Eu³⁺ from the hosts, BaTiO₃ and BaSnO₃, are significantly different. Based on detailed structural investigations, it is confirmed that synthesizedBaTiO₃ sample is tetragonal with no center of symmetry around Ba²⁺ ions. Unlike this BaSnO₃ is cubic with centrosymmetric Ba²⁺ site. From X‐ray diffraction and experimentally obtained Judd–Ofelt parameters (Ω₂ and Ω₄ values), it is confirmed that in BaTiO₃ there is a decrease in the average Ba–O and Ba–Ba distances compared with that in BaSnO₃. This leads to higher Eu–O bond polarizability and adds to the distortion in its environment around Eu³⁺ in BaTiO₃:Eu compared with BaSnO₃:Eu. This is responsible for the observed difference in the luminescence properties.     

Arabidopsis thaliana Plants with Different Levels of Aliphatic- and Indolyl-Glucosinolates Affect Host Selection and Performance of Bemisia tabaci

Generalist insects show reduced selectivity when subjected to similar, but not identical, host plant chemical signatures. Here, we produced transgenic Arabidopsis thaliana plants that over-express genes regulating the aliphatic- and indolyl- glucosinolates biosynthetic pathways with either a constitutive (CaMV 35S) or a phloem-specific promoter (AtSUC2). This allowed us to examine how exposure to high levels of aliphatic- or indolyl-glucosinolates in homogenous habitats (leaf cage apparatus containing two wild-type or two transgenic leaves) and heterogeneous habitats (leaf cage apparatus containing one wild-type and one transgenic leaf) affects host selection and performance of Bemsia tabaci, a generalist phloem-feeding insect. Data from homogenous habitats indicated that exposure to A. thaliana plants accumulating high levels of aliphatic- or indolyl-glucosinolates negatively affected the performance of both adult females and nymphs of B. tabaci. Data from heterogeneous habitats indicated that B. tabaci adult females selected for oviposition plants on which their offspring perform better (preference-performance relationship). However, the combinations of wild-type and transgenic plants in heterogeneous habitats increased the period of time until the first choice was made and led to increased movement rate on transgenic plants, and reduced fecundity on wild-type plants. Overall, our findings are consistent with the view that both performance and selectivity of B. tabaci decrease in heterogeneous habitats that contain plants with closely-related chemical signatures.     

Mechanically robust and thermally enhanced sand-polyacrylamide-2D nanofiller composite hydrogels for water shutoff applications

Herein, we report a facile preparation method for mechanically robust and thermally enhanced sand-polyacrylamide (PAM)-2D-nanofillers composite hydrogels and their application in water shutoff. To prepare the sample, 4 wt% of aqueous PAM solution is mixed with organic cross-linkers of hydroquinone (HQ) and hexamethylenetetramine (HMT) in a 1:1 weight ratio and aqueous potassium chloride (KCl) solution and with a specific amount of 2D-nanofillers such as commercial graphene (CG) nanosheets or boron nitride nanoparticles (BN NPs). A specific amount of the above solution is added to sand, well mixed, and subsequently cured at 150°C for 8 h. The prepared composite hydrogels were characterized by Fourier-transform infrared spectroscopy (FT-IR) for chemical composition and X-ray diffraction (XRD) for successful hydrogel coating onto the sand particles. Thermal stabilities of the samples have been evaluated by differential scanning calorimetry (DSC). Mechanical properties (storage modulus [G′]; loss modulus [G″]; gel strength (G′/G″); and damping factor [G″/G′]) of the samples were determined using dynamic mechanical analyses. The thermal stability of the samples has reached as high as 193.4°C, while the gel strength is found to be a maximum of 16.2. The water swelling ratio for the composite hydrogel has reached a maximum of 1100% within 1 h.     

Cellulose acetate and sulfonated polysulfone blend ultrafiltration membranes. I. Preparation and characterization

Modification of polymeric membrane materials by incorporation of hydrophilicity results in membranes with low fouling behavior and high flux. Hence, Polysulfone was functionalized by sulfonation and ultrafiltration membranes were prepared based on sulfonated polysulfone and cellulose acetate in various blend compositions. Polyethyleneglycol 600 was employed as a nonsolvent additive in various concentrations to the casting solution to improve the ultrafiltration performance of the resulting membranes. The total polymer concentration, cellulose acetate, and sulfonated polysulfone polymer blend composition, additive concentration, and its compatibility with polymer blends were optimized. The membranes prepared were characterized in terms of compaction, pure water flux, membrane resistance, and water content. The compaction takes place within 3–4 h for all the membranes. The pure water flux is determined largely by the composition of sulfonated polysulfone and concentration of additive. Membrane resistance is inversely proportional to pure water flux, and water content is proportional to pure water flux for all the membranes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1749–1761, 2002     

Use of rice bran oil and epoxidized rice bran oil in carbon black–filled natural rubber–polychloroprene blends

In the present study we report the results obtained on the use of rice bran oil (RBO), a naturally occurring nontoxic oil, and its epoxidized variety (epoxidized RBO, or ERBO) in the compounding and vulcanization of different natural rubber–chloroprene rubber (NR–CR) blends. The processability, cure characteristics, and physical properties of the blends prepared with these oils were compared with those of control mixes prepared with aromatic oil. The optimum cure time and scorch time values of the different blends prepared with these oils were found to be lower than those of the respective control blends prepared with aromatic oil. Evaluation of physical properties of the different experimental blends showed that replacement of aromatic oil with these oils did not adversely affect their physical properties. Because RBO contains a good amount of free fatty acids it was tried as a coactivator in addition to its role as a processing aid. The level of these oils required for the blend preparation was optimized in a Brabender plasticorder. Physical properties such as tensile strength, elongation at break, tear strength, swelling index, and abrasion loss, for example, were evaluated for both experimental and control mixes. Comparison of cure characteristics and physical properties of the blends prepared with aromatic oil and with these oils showed that these oils could be used in place of aromatic oil in the above blends. It is also to be noted that aromatic oil is of petroleum origin and is reported to be carcinogenic. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4084–4092, 2003