风机动力型末端在变风量空调系统中的应用

通过对从低温送风技术中发展起来的变风量系统末端--风机动力箱的分析,在实际应用中对比两种型式的该种末端,分析其优缺点,认为这是一种值得在高级办公大楼中优先考虑和推广的系统形式.     

Electroplated hard magnetic material and its application in microelectromechanical systems

We describe the preparation of CoNiMnP-based permanent-magnet material using several sulfate and chloride solutions. We studied eight samples, and all the samples show vertical magnetic anisotropy. Sample8, which was electroplated from a low-concentration chloride solution and under external magnetic field, demonstrates the best magnetic properties with coercivity 2632 Oe, remanence 0.20 T, and maximum magnetic energy 10.185 kJ/m/sup 3/. An array structure can avoid the stress between the electroplated layer and the seed layer. The electroplated Co/sub 0.8/Ni/sub 0.1174/Mn/sub 0.0062/P/sub 0.0762/ permanent magnet has potential for bidirectional actuators in micro-electromechanical systems.     

The hydration characteristics and expansion machanism of expansive cement at low<Emphasis Type="Italic">W/B</Emphasis> ratio

The hydration characteristics and expansion impetus of three kinds of cement paste under free-and confined-curing conditions were investigated, which were respectively mixed with three different kinds of expansive agent at low W/B ratio. The results show that the hydration products of pure cement paste and paste mixed with expansive agent are same, but the amount of hydration products, un-hydrated C₃S and C₂S are obviously different at the same hydration age. At 3 d age, the amount of CH in pure cement paste is less than that of paste mixed with expansive agent, but it is reverse when at 28 d age. The amount of AFt at 3d and 28d age in pure cement paste is less than those of paste mixed with expansive agent. Regardless of under free- or confined-curing condition, the amount of ettringite produced varies little since 3d age. The joint effect of the tumefaction of gel-ettringite due to water absorption and the expansive pressure on the pore caused by the crystalloid ettringite is the cause of the volume expansion of cement paste, and the former effect is much greater than the latter. LU Lin-nu : Born in 1972 Funded by 973 High-tech Project of China (No. 2001CB610704-2) and the Natural Science Foundation of Hubei Province(No. 2002AB075)     

飞轮贮能电池的发展与应用

介绍了飞轮贮能电池作为一种新概念电池所具有的优点：比能量、比功率大，寿命长，无二次污染；概括了飞轮储能电池所涉及的相关技术领域；对国内外飞轮储能技术的发展现状、主要应用领域和发展趋向进行了详细的论述。     

防爆自耦减压起动柜的改进设计

通过对防爆自耦减压起动柜电气设计中涉及到的常见问题进行分析，提出了一些较为可行的改进方案，并重新对其进行了设计。     

导控溢流阀动态数学模型的建立及动态性能分析

分析了导控型溢流阀的动态特性，建立了其运动状态的数学模型，并对微分方程进行拉氏变换，得出了动态系统的方框图。     

圆锥相贯线的数控切割原理

对圆锥面上的两种相贯线进行了分析，获得了数控切割加工的理论模型，并介绍了为解决这类空间曲线切割加工而研制的数控切割设备，以及该设备在宝山钢铁公司３号高炉制造中的成功使用     

任意形状螺线管磁场的研究

导出了任意形状通电螺线管所产生的磁场在空间的分布情况，并讨论了螺线管在仪器设备中的普遍应用，给出了这类仪器设计中磁场计算的可靠模型     

气相色谱法测定四甘醇样品甲苯和正庚烷含量

建立了测定四甘醇样品中甲苯、正庚烷含量的气相色谱分析法。采用峰面积归一化法进行定量 ,测得甲苯和正庚烷的回收率分别为 98 32 %～ 1 0 2 87%和 97 81 %～ 1 0 2 84% ,相对标准偏差不大于 1 5 0 %和 1 97%。该法快速 ,准确 ,精密度高 ,简单易行 ,具有一定的实用价值。     

马钢四铁厂2号高炉开炉实践

马钢四铁厂2号高炉通过开炉前的认真准备，加强人员培训，选择合适开炉料和送风参数以及送风后尽快降硅、合理调整煤气流等一系列措施，高炉开炉后生产水平快速上升，实现了开炉15天达产，第二个月高炉利用系数达2．238的好成绩。