FF现场总线的网段负载能力的设计及计算

从生产安全运行的管理要求；电压压降和电流的限制及信号的衰减；网络运行时间的要求；系统设计的影响；备用能力的考虑等各个方面，结合上海赛科聚苯乙烯项目的具体设计，分析隔爆条件下FF现场总线的H1网段负载能力的设计，以供大家探讨。     

地下埋藏式钢岔管抗外压稳定性分析

考虑了钢岔管与混凝土垫层的初始缝隙和初始几何缺陷,给出了一套地下埋藏式钢岔管抗外压稳定性的三维有限元分析和求解方法。采用该方法分析某工程实例,将其成果与阿氏公式计算的结果进行了比较,证明了该方法的可行性,并得到一些对工程设计有参考价值的成果。     

电调整微蚀刻

评述了采用电调整微蚀刻试验表明,它适用于各种各样的线宽和间距的精细导线的制造。比起常规喷射蚀刻工艺来,其侧蚀小、蚀刻因子和tanθ高的效果。     

He-Ne激光自混合干涉的模式研究

对一般He—Ne激光和频率分裂激光器中偏振态相互垂直的o光和e光的自混合于涉的模式进行了研究，发现了单模变三模的现象，并进行了解释。     

在无铅环境中的热风整平

当电子工业走向无铅焊接的时候,热风焊料整平仍然是继续可焊性保护的优选方法。     

Recovery of gold cyanide using inherently conducting polymers

Removal of gold from basic solutions containing [Au(CN)₂]^? has been demonstrated using the inherently conducting polymer polypyrrole. Polymers containing sulfonated aromatic dopants have been found to display a significant ability to remove gold from such solutions. Experiments performed in solutions containing both gold and copper cyanide complexes indicate that the recovery process is not highly selective. However, the polypyrroles used display significantly faster rates of gold recovery than activated carbon. © 2003 Society of Chemical Industry     

基于手写笔的多功能电子白板系统的实现

该文针对当前电子白板系统对个性化支持的不足,引入手写笔作为输入设备,充分利用其功能参数,设计开发了具有模拟毛笔、钢笔、铅笔等真实笔特征的多笔型功能的电子白板系统。     

High-performance MIM capacitor using ALD high-k HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectrics

For the first time, we successfully fabricated and demonstrated high performance metal-insulator-metal (MIM) capacitors with HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectric using atomic layer deposition (ALD) technique. Our data indicates that the laminate MIM capacitor can provide high capacitance density of 12.8 fF//spl mu/m/sup 2/ from 10 kHz up to 20 GHz, very low leakage current of 3.2 /spl times/ 10/sup -8/ A/cm/sup 2/ at 3.3 V, small linear voltage coefficient of capacitance of 240 ppm/V together with quadratic one of 1830 ppm/V/sup 2/, temperature coefficient of capacitance of 182 ppm//spl deg/C, and high breakdown field of /spl sim/6 MV/cm as well as promising reliability. As a result, the HfO/sub 2/-Al/sub 2/O/sub 3/ laminate is a very promising candidate for next generation MIM capacitor for radio frequency and mixed signal integrated circuit applications.     

用MATLAB进行三相交-交变频电源的仿真设计

三相交－交变频电源在低频拖动控制中有广泛的应用，通过晶闸管设计的静止式变频电源具有效率高，无噪声的优点，但却存在设计复杂、成本高，高速困难等缺点，而利用MATLAB软件中的Simlink仿真工具来实现三相交－交变频电源的仿真设计和分析，能做到省时，省成本，易于操作，在静止式变频电源设计中有很好的使用价值。采用MATLAB仿真工具完成了一个全数字控制的三相交－交变频电源的设计。