Zum Einsatz synthetischer Pyrethroide im vorbeugenden Holzschutz

The synthetic pyrethroids fenvalerate and cypermethrine, natural pyrethrum and lindane were investigated as wood preservatives under conditions of application to determine their contribution to indoor pollution. While pyrethrum degraded within 10 days, fenvalerate and cypermethrine showed high stability and long-term remaining in wood and no volatility into gasphase. In contrast to lindane they do not contribute to indoor pollution.     

Changes in RBE of 14-MeV (d + T) neutrons for V79 cells irradiated in air and in a phantom: is RBE enhanced near the surface?

PURPOSE: The relative biological effectiveness (RBE) for inactivation of V79 cells was determined as function of dose at the Heidelberg 14-MeV (d + T) neutron therapy facility after irradiation with single doses in air and at different depths in a therapy phantom. Furthermore, to assess the reproducibility of RBE determinations in different experiments we examined the relationship between the interexperimental variation in radiosensitivity towards neutrons with that towards low LET 60Co photons. METHODS: Clonogenic survival of V79 cells was determined using the colony formation assay. The cells were irradiated in suspension in small volumes (1.2 ml) free in air or at defined positions in the perspex phantom. Neutron doses were in the range, Dt = 0.5-4 Gy. 60Co photons were used as reference radiation. RESULTS: The radiosensitivity towards neutrons varied considerably less between individual experiments than that towards photons and also less than RBE. However, the mean sensitivity of different series was relatively constant. RBE increased with decreasing dose per fraction from RBE = 2.3 at 4 Gy to RBE = 3.1 at 0.5 Gy. No significant difference in RBE could be detected between irradiation at 1.6 cm and 9.4 cm depth in the phantom. However, an approximately 20% higher RBE was found for irradiation free in air compared with inside the phantom. Combining the two effects, irradiation with 0.5 Gy free in air yielded an approximately 40% higher RBE than a dose of 2 Gy inside the phantom. CONCLUSION: The measured values of RBE as function of dose per fraction within the phantom is consistent with the energy of the neutron beam. The increased RBE free in air, however, is greater than expected from microdosimetric parameters of the beam and may be due to slow recoil protons produced by interaction of multiply scattered neutrons or to an increased contribution of alpha particles from C(n, alpha) reactions near the surface. An enhanced RBE in subcutaneous layers of skin combined with an increase in RBE at low doses per fraction outside the target volume could potentially have significant consequences for normal tissue reactions in radiotherapy patients treated with fast neutrons.     

Dynamic light scattering and ultrasonic investigations during the cure reaction of an epoxy resin

Brillouin scattering (BS), photon correlation spectroscopy (PCS), and ultrasonic (US) measurements were conducted to study the curing process of diglycidyl ether of bisphenol A with butane-1,4-diol at a curing temperature of 100°C. The experimental techniques probe the primary glass-rubber transition during the curing reaction. The primary relaxation time τ obtained from the BS and US velocity and absorption increases with curing time and hence the BS experiment measures τ at earlier stages of cure than the US experiment. The relaxation times at a different extent of reaction and for different measuring temperatures are consistent with BS, US, PCS, and DSC measurements and conform to a single reduced Vogel–Fulcher–Hesse–Tamann equation. Furthermore, the US experiments show evidence of secondary relaxations in the epoxy system.     

Development and characterization of a biocompatible OH-modified copolymer based on polyurethane

Different polyurethanes were synthesized by varying the diol as well as the diisocyanate components and chain extenders. Polyurethanes with OH-groups were obtained by photo- and thermoinitiation of the radical polymerization of hydroxy alkyl acrylates in the presence of the polyurethanes. The polymers were evaluated with respect to their biocompatibility by measuring the cell spreading, the rates of DNA- and protein synthesis and the swelling behaviour. The differences in the surfaces and the bulks between the selected basic polyurethane and the functionalized modification were determined and characterized by XPS, FTIR-ATR and ¹³C-FT-NMR-spectroscopy. The mechanical data of Tecoflex EG 60D® and Pellethane 2363–80AE® were compared with the data of the synthesized polyurethanes.     

Influence of compaction on the interfacial transition zone and the permeability of concrete

The interfacial transition zone (ITZ) is regarded as a key feature for the transport properties and the durability of concrete. In this study one self-compacting concrete (SCC) mixture and two conventionally vibrated concrete (CVC) mixtures are studied in order to determine the influence of compaction on the porosity of the ITZ. Additionally oxygen permeability and water conductivity were measured in vertical and horizontal direction. The quantitative analysis of images made with an optical microscope and an environmental scanning electron microscope shows a significantly increased porosity and width of the ITZ in CVC compared to SCC. At the same time oxygen permeability and water conductivity of CVC are increased in comparison to SCC. Moreover, considerable differences in the porosity of the lower, lateral and upper ITZ are observed in both types of concrete. The anisotropic distribution of pores in the ITZ does not necessarily cause anisotropy in oxygen permeability and water conductivity though.     

Rheological and dielectrical characterization of melt mixed polycarbonate-multiwalled carbon nanotube composites

A series of composites of polycarbonate (PC) with 23 different contents of multiwalled carbon nanotubes (MWNT) was produced by melt mixing using the masterbatch dilution method. In dielectric measurements, AC conductivity and complex permittivity data obtained in the frequency range between 10⁻³ and 10⁷ Hz at room temperature indicated the electrical percolation threshold at about 1.0 wt%.

The dynamic mode melt rheological measurements for the same samples at eight temperatures between 170 and 280 °C showed a visible change in the frequency dependence of dynamic moduli and the absolute value of the complex viscosity |η*| particularly at low frequencies. In literature these changes are sometimes related to so called ‘percolation threshold concentration’. Applying this picture to our experimental data we have to assume that the percolation threshold is strongly dependent on the measurement temperature. It changes from about 5 to 0.5 wt% MWNT by increasing the measurement temperature from 170 to 280 °C, respectively. This temperature dependence cannot be explained by a classical liquid-solid transition but may be related to the existence of a combined nanotube-polymer network.     

Underpotential alloy formation in the system Ag(hkl)/Cd2+

The underpotential deposition (UPD) of Cd on “real” and “quasi-ideal” silver single crystal surfaces of (111) and (100) crystallographic orientation as well as on polycrystalline silver substrate has been investigated in 0.5 M Na₂SO₄ supporting electrolyte solutions. At high underpotentials 100 < ΔE < 350 mV, the UPD is characterized by a quasi-reversible adsorption/desorption of Cd whereas at low underpotentials. ΔE < 50 mV, an increase of the anodic stripping charge with the polarization time is found due to the formation of an AgCd alloy at the substrate surface. The time dependence of this process can be described by a parabolic rate law, the rate constant of which is a function of ΔE and temperature T. Relatively low activation energies of about 70 kJmol^?1 were determined from measurements at 293 ? T ? 338 K. The results are discussed in terms of a semi-infinite-linear diffusion model. The alloy formation process is assumed to be initiated by a place exchange between Ag substrate atoms and vacancy sites within a mobile Cd adsorbate layer thus forming the initial stage of a highly distorted AgCd alloy. The further growth will take place by the movement of Ag atoms through the vacancy-rich surface alloy and the simultaneous deposition of Cd at the interface AgCd/Cd²⁺.     

Energieinformatik

Due to the increasing importance of producing and consuming energy more sustainably, Energy Informatics (EI) has evolved into a thriving research area within the CS/IS community. The article attempts to characterize this young and highly dynamic field of research by describing current EI research topics and methods and provides an outlook of how the field might evolve in the future. It is shown that two general research questions have received the most attention so far and are likely to dominate the EI research agenda in the coming years: How to leverage information and communication technology (ICT) to (1) improve energy efficiency, and (2) to integrate decentralized renewable energy sources into the power grid. Selected EI streams are reviewed, highlighting how the respective research questions are broken down into specific research projects and how EI researchers have made contributions based on their individual academic background.