Removing of light hydrocarbons from gas mixtures using polymeric composite membranes based on poly(1-trimethylsilylpropyne)

Usually the methodologies used to analyse the feasibility of water reuse projects are focused on the internal costs. The aim of this paper is to show a methodology to assess the feasibility of a water reuse project taking into account not just the internal impact, but also the external impact (environmental and social, for example) and the opportunity cost derived from the project. Internal benefit is obtained from the difference between internal income and internal costs. Internal income is obtained by multiplying the selling price of reclaimed water and the volume obtained. Internal costs are made up of the sum of investment costs, operating costs, financial costs and taxes. While some of these factors identified can be calculated directly in terms of money, biophysical and social aspects demand the definition of units of measurement. In order to homogenize results, an annual reference is proposed. A monetary value can be obtained from the calculation of each impact. However, there are a series of externalities for which no explicit market exists. In these cases economic valuation methods are used, based on hypothetical scenarios or patterns observed in related markets.     

General intracavity method for laser transition characterization byrelaxation oscillations spectral analysis

Monitoring the transient buildup of laser emission is proposed as a simple method for spectro-temporal intracavity diagnostics of laser transitions and materials. Using this method, we determined the absolute magnitude of both laser emission and absorption cross sections for a line-narrowed tunable Er³⁺-fiber laser     

Mathematical modelling of the transient behaviour of cstrs with reactive particulates: Part 2 — Application to pyrite pressure oxidation

A population balance based transient reactor model is applied to a particulate process employed in the hydrometallurgical industry. The process is the pressure oxidation of pyritic concentrates, pertinent to the treatment of refractory gold materials. The chemical reaction system involves first an oxygen gas to aqueous mass transfer step, followed by a chemical reaction on the surface of mineral particles. The chemical reactor stimulated is a multi-stage continuous autoclave with variable compartment size. The model accounts for recycling oxidized solids, as well as for venting the gas phase. A complex system of partial and non-linear ordinary differential equations is rendered dimensionless and solved by a method developed previously using the Mathematica® software. The transient response of the reactor to different modes of reactor start-up, as well as the response to a step change of a key variable, are examined. The validity of the steady-state solution is assessed by comparing it to previous modelling attempts.     

Mathematical modelling of the transient behaviour of cstrs with reactive particulates: Part 1 — The population balance framework

The population balance model appears to be the best approach to model particulate systems where multiple heterogeneous reactions occur. This work demonstrates a mathematical formulation that is based on the population balance model, and aims at simulating the non steady-state behaviour of a single-stage CSTR under isothermal operation. The chemical reaction system is a typical example from the field of hydrometallurgy with two parallel reactions, one being leaching, the other precipitation with simultaneous reactant regeneration. The solution of the resulting system of the partial and ordinary differential equations is achieved by combining the moment transformation of the population balance equations with the numerical method of lines, using the Mathematica® software. Finally, examples are given for a reactor startup in two cases: a single leaching reaction, and simultaneous leaching and precipitation reactions. In the first case, the difference between simultaneous and sequential feeding in achieving steady-state is also discussed.     

Unconventional gallium oxide nanowires

Zigzag and helical beta-Ga(2)O(3) one-dimensional nanostructures were produced by thermal evaporation of gallium oxide in the presence of gallium nitride. High-resolution TEM analysis indicates that each individual zigzag nanostructure has a periodic arrangement of three distinct blocks: two structurally perfect blocks mirrored with respect to each other on the (002) plane, and one stacking-fault-rich block sandwiched between them. In a zigzag nanostructure, the growth orientation of a beta-Ga(2)O(3) crystal changes alternately in three blocks. The zigzag nanostructure as a whole has the [001] axial direction. In addition to zigzag nanostructures, single-crystalline helical nanowires were also obtained.     

Application of Inhibitor‐Loaded Halloysite Nanotubes in Active Anti‐Corrosive Coatings

Halloysite particles are aluminum‐silicate hollow cylinders with a length of 0.5–1 µm, an outer diameter of ca. 50 nm and a lumen of 15 nm. These nanotubes are used for loading and sustained release of corrosion inhibitors. The inhibitor is kept inside the particles infinitely long under dry conditions. Here, halloysite nanotubes filled with anticorrosive agents are embedded into a SiO_x–ZrO_x hybrid film. An aluminum plate is dip‐coated and immersed into 0.1 M sodium chloride aqueous solution for corrosion tests. A defect in the sol–gel coating induces pitting corrosion on the metal accompanied by a strong anodic activity. The inhibitor is released within one hour from halloysite nanotubes at corrosion spots and suppresses the corrosion process. The anodic activity is successfully restrained and the protection remains for a long time period of immersion in NaCl water solution. The self‐healing effect of the sol–gel coating doped with inhibitor‐loaded halloysite nanotubes is demonstrated in situ via scanning vibrating electrode technique measurements.     

Template Deformation‐Tailored ZnO Nanorod/Nanowire Arrays: Full Growth Control and Optimization of Field‐Emission

Here, a facile and effective route toward full control of vertical ZnO nanorod (NR)/nanowire (NW) arrays in centimeter‐scale areas and considerable improvement of field‐emission (FE) performance is reported. Controlled deformation of colloidal crystal monolayer templates is introduced by heating near glass‐transition temperature. The NR/NW density, uniformity, and tapering were all adjusted through selection of template size and deformation, and electrolyte composition. In line with the adjustments, the field‐emission performance of the arrays is significantly improved. A low turn‐on electric field of 1.8 V µm^?1, a field‐enhancement factor of up to 5 750, and an emitting current density of up to 2.5 mA cm^?2 were obtained. These improved parameters would benefit their potential application in cold‐cathode‐based electronics.     

Characterization,Cathodoluminescence, and Field‐Emission Properties of Morphology‐Tunable CdS Micro/Nanostructures

High‐quality, uniform one‐dimensional CdS micro/nanostructures with different morphologies—microrods, sub‐microwires and nanotips—are fabricated through an easy and effective thermal evaporation process. Their structural, cathodoluminescence and field‐emission properties are systematically investigated. Microrods and nanotips exhibit sharp near‐band‐edge emission and broad deep‐level emission, whereas sub‐microwires show only the deep‐level emission. A significant decrease in a deep‐level/near‐band‐edge intensity ratio is observed along a tapered nanotip towards a smaller diameter part. This behavior is understood by consideration of defect concentrations in the nanotips, as analyzed with high‐resolution transmission electron microscopy. Field‐emission measurements show that the nanotips possess the best field‐emission characteristics among all 1D CdS nanostructures reported to date, with a relatively low turn‐on field of 5.28 V µm^?1 and the highest field‐enhancement factor of 4 819. The field‐enhancement factor, turn‐on and threshold fields are discussed related to structure morphology and vacuum gap variations under emission.