DNA Antenna Tile‐Associated Deoxyribozyme Sensor with Improved Sensitivity

Some natural enzymes increase the rate of diffusion‐limited reactions by facilitating substrate flow to their active sites. Inspired by this natural phenomenon, we developed a strategy for efficient substrate delivery to a deoxyribozyme (DZ) catalytic sensor. This resulted in a three‐ to fourfold increase in sensitivity and up to a ninefold improvement in the detection limit. The reported strategy can be used to enhance catalytic efficiency of diffusion‐limited enzymes and to improve sensitivity of enzyme‐based biosensors.     

Enhanced transport properties of Sn-substituted proton-conducting BaZr0.8Sc0.2O3–δ ceramic materials

High-temperature proton conductors based on acceptor-doped barium zirconate exhibit excellent chemical stability in atmospheres containing CO₂ or H₂O. However, due to their refractory nature, these conductors have a low grain growth rate, which negatively affects the overall electrical conductivity. A possible strategy for increasing the ionic conductivity of zirconates lies in the partial substitution of Zr-ions with other isovalent dopants. In this work, we carried out systematic studies of the crystal structure, microstructure, hydration capacity, transport, and thermal properties of BaZr_0.8–xSn_xSc_0.2O_3–δ (x = 0, 0.1, and 0.2). According to X-ray powder diffraction and scanning electron microscopy data, all studied ceramic samples have a cubic perovskite structure, whose average grain size decreases with tin doping. It is found that the composition with x = 0.1 exhibits the highest values in terms of total, ionic, grain, and grain-boundary conductivities. The complex analysis of the obtained data shows that a low-level substitution of Zr⁴⁺- with Sn⁴⁺-ions is a competent approach for designing new proton-conducting electrolytes attractive for high-temperature applications.     

Kinetic modeling of hemicellulose hydrolysis in the presence of homogeneous and heterogeneous catalysts

Kinetic models were developed for the hydrolysis of O‐acetyl‐galactoglucomannan (GGM), a hemicellulose appearing in coniferous trees. Homogeneous and heterogeneous acid catalysts hydrolyze GGM at about 90°C to the monomeric sugars galactose, glucose, and mannose. In the presence of homogeneous catalysts, such as HCl, H₂SO₄, oxalic acid, and trifluoroacetic acid, the hydrolysis process shows a regular kinetic behavior, while a prominent autocatalytic effect was observed in the presence of heterogeneous cation‐exchange catalysts, Amberlyst 15 and Smopex 101. The kinetic models proposed were based on the reactivities of the nonhydrolyzed sugar units and the increase of the rate constant (for heterogeneous catalysts) as the reaction progresses and the degree of polymerization decreases. General kinetic models were derived and special cases of them were considered in detail, by deriving analytical solutions for product distributions. The kinetic parameters, describing the autocatalytic effect were determined by nonlinear regression analysis. The kinetic model described very well the overall kinetics, as well as the product distribution in the hydrolysis of water soluble GGM by homogeneous and heterogeneous catalysts. The modelling principles developed in the work can be in principle applied to hydrolysis of similar hemicelluloses as well as starch and cellulose. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1066–1077, 2014     

Heat Treatment and Chemical Composition of Fatty Acids and Rosin Acids Mixtures: Effects on Their Thermal Properties and Morphology

Mixtures of fatty acids and rosin acids are industrially important products utilized as a raw material for several purposes. Their thermal properties, especially cold stability and crystallization behavior is also important. Several fatty acid and rosin acid mixtures both from industrial products and from commercially available fatty and rosin acids were prepared and treated for 30 min at 80 °C under an inert atmosphere. Thereafter, the mixture was cooled to the desired temperature. Determination of the cloud point, chemical analysis of liquid and solid phase, thermal analysis by differential scanning calorimetry as well as morphology analysis by scanning electron microscopy were performed. The results revealed that crystallization was more rapid when it occurred at 10 °C compared to 25 °C. The crystal sizes increased with decreasing the crystallization temperature. Furthermore, crystals were of irregular shape and agglomerated when rapid cooling of the mixture occurred. Chemical analysis revealed that liquid phase was enriched with stearic acid, whereas crystals contained large amounts of abietic, dehydroabietic and linoleic acids. The cloud point of the mixtures increased with increasing amount of stearic and rosin acids. Dehydroabietic acid addition improved the cold stability of the synthetic fatty acid–rosin acids mixture.     

Design of Porous Alginate Hydrogels by Sacrificial CaCO3 Templates: Pore Formation Mechanism

Fabrication of porous alginate hydrogels with a well‐controlled architecture useful for tissue engineering is still a challenge. Here, CaCO₃‐based templating is utilized to design stable alginate gels with controlled pore dimensions in the range of 5–50 μm. The mechanism of pore formation is studied considering two factors affecting the pore size: i) osmotic pressure generated during the dissolution of sacrificial CaCO₃ templates and ii) alginate gel network density. Osmotic pressure can achieve an upper limit of 100 MPa but does not affect the gel porosity. Additional osmotic pressure (range of kPa) induced by dextrans pre‐encapsulated into CaCO₃ vaterite is also insufficient for pore enlargement. Pore stability depends merely on the gel network density and on the number of crosslinking calcium ions provided locally per unit time; pores are collapsed when template dissolution is too slow or if there is insufficient alginate concentration (below 2%). Young's modulus indicates the soft nature of the prepared hydrogels (tens of kPa) applicable as soft porous scaffolds with a tuned internal structure.     

Local Accumulation of Lymphocytes in the Intima of Human Aorta Is Associated with Giant Multinucleated Endothelial Cells: Possible Explanation for Mosaicism of Atherosclerosis

Distribution of different types of atherosclerotic lesions in the arterial wall is not diffuse, but is characterized by mosaicism. The causes of such distribution remain to be established. At the early stages of atherogenesis, low-density lipoprotein (LDL) particles and immune cells penetrate into the intimal layer of the arterial wall through the endothelium. In adult humans, the luminal surface of the arterial wall is a heterogeneous monolayer of cells with varying morphology including typical endothelial cells (ECs) and multinucleated variant endothelial cells (MVECs). We hypothesized that distribution of MVECs in the endothelial monolayer can be related to the distribution pattern of early atherosclerotic lesions. We obtained en face preparations of intact adult (22–59 years old) aortic wall sections that allowed us to study the endothelial monolayer and the subendothelial layer. We compared the distribution of MVECs in the endothelial monolayer with the localization of early atherosclerotic lesions in the subendothelial layer, which were characterized by lipid accumulation and immune cell recruitment. In primary culture, MVECs demonstrated increased phagocytic activity compared to mononuclear ECs. Moreover, we have shown that unaffected aortic intima contained associates formed as a result of aggregation and/or fusion of LDL particles that are non-randomly distributed. This indicated that MVECs may be involved in the accumulation of LDL in the subendothelial layer through increased transcytosis. Interaction of LDL with subendothelial cells of human aorta in primary culture increased their adhesive properties toward circulating immune cells. Study of unaffected aortic intima revealed non-random distribution of leukocytes in the subendothelial layer and increased localization of CD45+ leukocytes in the subendothelial layer adjacent to MVECs. Together, our observations indicate that MVECs may be responsible for the distribution of atherosclerotic lesions in the arterial wall by participating in LDL internalization and immune cell recruitment.