Spatial distribution and temporal variation of metals in the vicinity of a municipal solid waste incinerator after a modernization of the flue gas cleaning systems of the facility

In June 1994 and 1997, the concentrations of a number of elements were determined in soil and herbage samples collected in the vicinity of a municipal solid waste incinerator (MSWI) (Tarragona, Catalonia, Spain). In August 1997, an adaptation to the EU legislation on pollutant emissions from the stack was carried out to the incinerator. In June 1999, soil and herbage samples were collected again at the same sampling points and the levels of arsenic (As), cadmium (Cd), chromium (Cr), lead (Pb), manganese (Mn), mercury (Hg), nickel (Ni) and vanadium (V) were measured by ICP-MS or AAS with graphite furnace. The results are compared with those obtained in the 1994 and 1997 surveys. In the period 1997-1999, the only significant changes in soil levels corresponded to Cd and Pb, with decreases of 21.0% and 53.5%, respectively. In vegetation, only Mn levels showed a significant reduction, which contrasts with the notable increases found in the concentrations of As, Hg and Ni. According to the results of this survey, it seems evident that other metal emission sources in the same area of study are masking the environmental improvements carried out in the MSWI.     

Explicit geometric model of a radioscopic imaging system

In this paper a new explicit model of a radioscopic imaging system is presented. The model includes three parts: X-ray projection, image intensifier and CCD camera. The X-ray projection is modelled as a linear central projection. The image intensifier is modelled using a new explicit model that considers the curved input screen and the non-linear projection caused by electromagnetic fields. The CCD camera is modelled according to a general 2D projective transformation of the output screen of the image intensifier. Thus, the back-projection, required for 3D reconstruction, can be expressed in a closed-form. The model is compared to seven other known models. The presented model achieves high accuracy.     

Antigenically profound amino acid substitutions occur during large population passages of foot-and-mouth disease virus

Protein kinase C (PKC) is an ubiquitous regulatory enzyme with dense myocardial distribution and activity; however, its physiologic relevance to myocardial function remains poorly understood. Although endogenous Ca2+ is a potent stimulus of PKC isoforms alpha and beta (cPKCs) it remains unknown whether exogenous Ca2+ activates these PKC isoforms, and if so, whether PKC plays any role in Ca2+-induced myocardial inotropy. To study this, ventricular sections from isolated rat hearts, with and without Ca2+-induced inotropy (CaCl2, 0.5 mM coronary concentration x 2 min), were probed for cPKC isoform translocation using immunofluorescence in order to determine if exogenous Ca2+ indeed activates cPKCs. We further examined the effects of exogenous Ca2+, with and without concurrent PKC inhibition (chelerythrine, 20 microM coronary concentration x 2 min), on fundamental physiologic parameters of myocardial developed pressure (DP), dP/dt, and coronary flow (CF) in the isolated rat heart to determine if Ca2+-induced inotropy involves PKC. Results indicated that exogenous Ca2+ results in translocation of PKC a from the cytoplasm to the sarcolemma and intercalated discs, as well as the translocation of PKC beta from the perinuclear to the intranuclear compartment. This dose of exogenous Ca2+ resulted in myocardial inotropy as determined by DP, dP/dt, and CF. Furthermore, myocardial inotropy was attenuated with concurrent inhibition of PKC activity. These findings link the physiologic effects of exogenous Ca2+ to PKC, providing a better understanding of the physiologic mechanism of Ca2+-induced inotropy.     

Broad-beam transmission data for new brachytherapy sources, Tm-170 and Yb-169

The characteristics of the radionuclides (170)Tm and (169)Yb are highly interesting for their use as high dose-rate brachytherapy sources. The introduction of brachytherapy equipment containing these sources will lead to smaller required thicknesses of the materials used in radiation protection barriers compared with the use of conventional sources such as (192)Ir and (137)Cs. The purpose of this study is to determine the required thicknesses of protection material for the design of the protecting walls. Using the Monte Carlo method, transmission data were derived for broad-beam geometries through lead and concrete barriers, from which the first half value layer and tenth value layer are obtained. In addition, the dose reduction in a simulated patient was studied to determine whether transmission in the patient is a relevant factor in radiation protection calculations.     

Structuration and integration of magnetic nanoparticles on surfaces and devices

Different experimental approaches used for structuration of magnetic nanoparticles on surfaces are reviewed. Nanoparticles tend to organize on surfaces through self-assembly mechanisms controlled by non-covalent interactions which are modulated by their shape, size and morphology as well as by other external parameters such as the nature of the solvent or the capping layer. Further control on the structuration can be achieved by the use of external magnetic fields or other structuring techniques, mainly lithographic or atomic force microscopy (AFM)-based techniques. Moreover, results can be improved by chemical functionalization or the use of biological templates. Chemical functionalization of the nanoparticles and/or the surface ensures a proper stability as well as control of the formation of a (sub)monolayer. On the other hand, the use of biological templates facilitates the structuration of several families of nanoparticles, which otherwise may be difficult to form, simply by establishing the experimental conditions required for the structuration of the organic capsule. All these experimental efforts are directed ultimately to the integration of magnetic nanoparticles in sensors which constitute the future generation of hybrid magnetic devices.     

Surface enhanced fluorescence of anti-tumoral drug emodin adsorbed on silver nanoparticles and loaded on porous silicon

Fluorescence spectra of anti-tumoral drug emodin loaded on nanostructured porous silicon have been recorded. The use of colloidal nanoparticles allowed embedding of the drug without previous porous silicon functionalization and leads to the observation of an enhancement of fluorescence of the drug. Mean pore size of porous silicon matrices was 60 nm, while silver nanoparticles mean diameter was 50 nm. Atmospheric and vacuum conditions at room temperature were used to infiltrate emodin-silver nanoparticles complexes into porous silicon matrices. The drug was loaded after adsorption on metal surface, alone, and bound to bovine serum albumin. Methanol and water were used as solvents. Spectra with 1 μm spatial resolution of cross-section of porous silicon layers were recorded to observe the penetration of the drug. A maximum fluorescence enhancement factor of 24 was obtained when protein was loaded bound to albumin, and atmospheric conditions of inclusion were used. A better penetration was obtained using methanol as solvent when comparing with water. Complexes of emodin remain loaded for 30 days after preparation without an apparent degradation of the drug, although a decrease in the enhancement factor is observed. The study reported here constitutes the basis for designing a new drug delivery system with future applications in medicine and pharmacy.     

Femtosecond laser deposition of TiO2 by laser induced forward transfer

Femtosecond lasers have been used for laser induced forward transfer (LIFT) of TiO₂, a wide-band semiconductor with many industrial and research applications. TiO₂ polycrystalline thin films on quartz (obtained by pulsed laser deposition) were used as donors and both quartz and fluorine-doped tin dioxide coated glass substrates as acceptors. LIFT was performed at the laser wavelengths of 248 and 800 nm with pulses of 450 and 300 fs respectively. The transferred material was characterized by energy-dispersive X-ray spectroscopy, X-ray diffraction and micro-Raman spectroscopy to determine the composition and crystalline quality, and by scanning electron microscopy and atomic force microscopy to assess the surface morphology. The relation between these properties and the laser transfer conditions, including wavelength, pulse energy and acceptor substrate, are presented.     

One step room temperature photodeposition of Cu/TiO2 composite films and its conversion to CuO/TiO2

Cu/TiO₂ composite films were prepared at low temperature on glass substrates by a photodeposition method. Films were deposited by irradiating the substrate while in contact with an aqueous TiO₂ suspension containing copper(II) nitrate and ethanol. Cu/TiO₂ composite films of 500 nm in thickness were deposited at room temperature after a short irradiation time (15 min) with a 125 W mercury vapour lamp. According to scanning electron microscopy observations, the obtained films were homogeneous and porous. Energy dispersive X-ray spectroscopy analysis revealed a 3:1 Cu:Ti atomic ratio. Grazing angle X-ray diffraction analysis showed that the films contained Cu and TiO₂ as major components and Cu₂O as a minor component. Heat treatment at 400 °C in air for a period of 3 h transformed the initial material into a CuO/TiO₂ composite, improved the adhesion to the substrate and favoured a more regular distribution of copper oxide according to backscattering micrographs.     

Operational flexibility quantification in a make-to-order assembly system

Manufacturing flexibility is becoming a fundamental production objective, along with cost, quality, and delivery time. Current production systems face quick changes in market conditions and they need to adapt in this environment. The supply chain and industrial globalization give an important role for assembly systems. Placed at the end of the value chain, assembly systems must face those quick changes successfully to reach the expected performance. The key performance indicators are normally based on cost, quality, and delivery time objectives. Reducing costs and improving quality are almost universal goals. Delivery time is typically determined by customer demand in the supply chain, planning from make-to-stock to make-to-order, and aspiring to reach a just-in-time manufacturing system. In this context, flexibility could be the differential advantage to tackle uncertainty. Closely related to the rest of production objectives and the overall performance of the system, flexibility must be integrated in the system for successful decision-making in operations. This work presents this approach of flexibility. A brief review of flexibility concepts and measurements in the literature precedes an introduction to flexibility, defined based on the function of utility. This function represents the expectations of system performance. This approach allows the formulation of the taxonomy of operational flexibility in agreement with the classical types identified in former works. Next, an integer model is programmed to simulate the basic behavior of task planning in a make-to-order assembly system. This first application illustrates flexibility quantification based on utility evolution. The use of common industrial parameters to quantify operational flexibility will finally facilitate an integrated interpretation of system performance trends.     

Quo vadis source tracking? Towards a strategic framework for environmental monitoring of fecal pollution

Advances in microbial source tracking (MST) have largely been driven by the need to comply with water quality standards based on traditional indicator bacteria. Recently, a number of culture-independent, and library-independent methods based on polymerase chain reaction (PCR) have been gaining popularity among source trackers. However, only a limited number of these methods have been successfully used in field applications, primarily due to the fact that many of them are still being developed. In this critical outlook, we examine different viewpoints associated with the practical use of MST to identify critical research gaps, propose a priority-based timeline to address them, and outline emerging technologies that will likely impact the future of source tracking. We propose that it is necessary to consider each of these aspects in order to advance towards a unifying framework in source identification, so that fecal pollution monitoring can be reliably used for comprehensive environmental microbial monitoring, to develop risk assessment models, and to implement and validate adequate management practices.