PWR's xenon oscillation control through a fuzzy expert system automatically designed by means of genetic programming

This work proposes the use of genetic programming (GP) for automatic design of a fuzzy expert system aimed to provide the control of axial xenon oscillations in pressurized water reactors (PWRs). The control methodology is based on three axial offsets of xenon (AOx), iodine (AOi) and neutron flux (AOf), effectively used in former work. Simulations were made using a two-point xenon oscillation model, which employs the non-linear xenon and iodine balance equations and the one group, one-dimensional neutron diffusion equation, with non-linear power reactivity feedback, also proposed in the literature. Results have demonstrated the ability of the GP in finding a good fuzzy strategy, which can effectively control the axial xenon oscillations.     

Desorption isotherms and thermodynamic properties of sweet corn cultivars (Zea mays L.)

The desorption isotherms and thermodynamic properties of two cultivars of sweet corn were obtained during the drying process of these products. The isotherms were determined by a dynamic method for various temperature and humidity conditions. Equilibrium moisture content (X_eq) data were correlated by the Guggenheim–Anderson–de Boer model and an artificial neural network (ANN) model. These models were fitted to the experimental data. The X_eq for corn grain increased with an increase in the relative humidity at fixed temperature and decreased with an increase in temperature at a constant relative humidity. The experimental data were analysed by a thermodynamic approach to obtain the isosteric heat of desorption (ΔH), differential entropy (ΔS), activation energy (E_a) and Gibbs free energy (ΔG). The ΔH and ΔS increased with a decrease in moisture content, while ΔG decreased exponentially with an increase in X_eq. The Arrhenius equation was used to obtain E_a values, with Supersweet corn having higher E_a.     

Modelling of the radiative properties of an opaque porous ceramic layer

Solid Oxide Fuel Cells (SOFCs) operate at temperatures above 1,100 K where radiation effects can be significant. Therefore, an accurate thermal model of an SOFC requires the inclusion of the contribution of thermal radiation. This implies that the thermal radiative properties of the oxide ceramics used in the design of SOFCs must be known. However, little information can be found in the literature concerning their operating temperatures. On the other hand, several types of ceramics with different chemical compositions and microstructures for designing efficient cells are now being tested. This is a situation where the use of a numerical tool making possible the prediction of the thermal radiative properties of SOFC materials, whatever their chemical composition and microstructure are, may be a decisive help. Using this method, first attempts to predict the radiative properties of a lanthanum nickelate porous layer deposited onto an yttria stabilized zirconium substrate can be reported.     

Theoretical Investigations of Interfaces in Electroceramic Materials

Some recent computer modeling studies of grain boundaries in electroceramics are reviewed. The report focuses on rutile and zinc oxide, which both have electronic device applications and describes computational methodologies employed in these investigations, both classical and quantum mechanical. Although the number of calculations is limited, there are indications that undoped symmetric grain boundaries in rutile and zinc oxide are not electrically active whereas doped boundaries do exhibit interface states in the bandgap, which will influence the electrical properties of the material.     

Preparation of electrospun nanofibrous polycaprolactone scaffolds using nontoxic ethylene carbonate and glacial acetic acid solvent system

In recent years, solution electrospinning has attracted the interest of researchers due to the possibility to design nanofibrous scaffolds with large surface area to volume ratios. Polycaprolactone (PCL), because of its biocompatibility and easy processability, has been widely used to develop electrospun structures for tissue engineering. However, the use of organic solvents and the poor PCL solution stability still hinder the development of the solution electrospinning process. The relatively benign glacial acetic acid (GAC) as a solvent of PCL was used to fabricate microfibrous fibers or beaded fibers. Thus, ethylene carbonate (EC) as a nontoxic assistant solvent was added to the PCL/GAC solution to successfully fabricate electrospun nanofibrous PCL scaffolds. The stability of the PCL/GAC/EC solution system was demonstrated as the viscosity, which showed no significant change during 48 h. The ultrafine PCL fiber diameter decreased as EC concentration was increased from 0 to 9 vol% and started to slightly increase when EC concentration increased beyond 9 vol%. MTT assay evidenced that MC3T3-E1 cells on the nanofibrous PCL scaffolds exhibited a better enhancement on cell proliferation. In summary, EC was added in PCL/GAC to establish a stable and low toxic solution electrospinning system, which provides promising strategy in tissue engineering field. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48387.     

Design and Evaluation of a Lorazepam Transdermal Delivery System

The aim of this work was to study the release and the permeation rate of lorazepam, in order to develop a transdermal therapeutic system (TTS) containing that drug. Only a small number of drugs are by themselves able to permeate the skin at a useful rate in order to achieve a therapeutic effect. The lorazepam permeation rate did not reach that value and required a skin permeation enhancer to increase the skin's permeability. Three permeation enhancers (Tween 80, sodium lauryl sulfate, and benzalkonium chloride) were investigated in two different concentrations: 1% and 5% of the amount of lorazepam. The best permeation enhancement results were obtained using benzalkonium chloride in concentration of 5%.     

Sustained-Release Tablet Containing Oxazepam: Study and Design

Sustained-release tablets containing oxazepam were prepared and dissolution profiles were investigated. The total dose of oxazepam is constituted of initial and maintenance dosage. A method for the preparation of hydrophilic matrix tablets is presented. The study of the dissolution rate of these preparations in artificial gastric (in the first two hours) and enteric juices (in the following ten hours) was experimented. No significant differences in oxazepam release rate were found between the formulations containing lactose, zinc sulfate, calcium sulfate or calcium phosphate added intragranularly to the maintenance dosage. The dissolutions studies of oxazepam preparations demonstrated differences in drug release properties depending on the content of extragranular croscarmellose sodium.     

Nitrogen removal and ammonia-oxidising bacteria in a vertical flow constructed wetland treating inorganic wastewater

Nitrogen removal performance and the ammonia-oxidising bacterial (AOB) community were assessed in the batch loaded 1.3 ha saturated surface vertical flow wetland at CSBP Ltd, a fertiliser and chemical manufacturer located in Kwinana, Western Australia. From September 2008 to October 2009 water quality was monitored and sediment samples collected for bacterial analyses. During the period of study the wetland received an average inflow of 1,109 m3/day with NH3-N = 40 mg/L and NO3-N = 23 mg/L. Effluent NH3-N and NO3-N were on average 31 and 25 mg/L, respectively. The overall NH3-N removal rate for the period was 1.2 g/m2/day indicating the nitrifying capacity of the wetland. The structure of the AOB community was analysed using group specific primers for the ammonia monooxygenase gene (amoA) by terminal restriction fragment length polymorphism and by clone libraries to identify key members. The majority of sequences obtained were most similar to Nitrosomonas sp. while Nitrosospira sp. was less frequent. Another two vertical flow wetlands, 0.8 ha each, were commissioned at CSBP in July 2009, since then the wetland in this study has received nitrified effluent from these two new cells.     

Retrieval of linear optical functions from finite range spectra

There are many experimental situations in which infrared reflectivity spectra can be acquired only over a limited spectral range. It is therefore necessary to find computing procedures that allow the efficient analysis of such data. In this paper, we propose a new procedure labeled constrained finite range correction (CFRC) that can be advantageously substituted to multiply subtractive Kramers-Kronig relations. The constrained finite range correction is able to produce realistic results even when very little supplementary information is available. For semitransparent crystals, the hypothesis of the phase spectrum positiveness alone is often sufficient to compute satisfactory approximations of the optical functions. The efficiency of the new method is shown through the analysis of several synthetic and experimental spectra.