Poly(lactic acid) fibers obtained by solution blow spinning: Effect of a greener solvent on the fiber diameter

Poly(lactic acid) (PLA) fibers has been obtained by solution blow spinning (SBS) using different solvents, however most of them are toxic and can be dangerous to human health or cause harm to the environment. Therefore, this work aimed to evaluate the use of dimethyl carbonate (DMC), a greener solvent, on the production of PLA fibers by SBS using surface response analysis to evaluate and compare the influence of three solvents (chloroform, DMC, and 1,1,1,3,3,3‐hexafluoro‐2‐propanol, HFP) in the average fiber diameter. Scanning electron microscopy (SEM) was used to analyze the fiber morphology and different ranges of fiber diameter was observed when varying the solvents (chloroform: 260–970 nm; DMC: 240–650 nm; and HFP: 220–470 nm). Regression analysis showed the polymer concentration was significant for all solvents and the air pressure was significant when using chloroform and HFP. Regardless of the air pressure, increasing the PLA concentration increased the average fiber diameters for all solvents. Chloroform and HFP indicated a tendency of reduction on the average fiber diameter when the air pressure was decreased, however this behavior was not observed for DMC. It was also observed that the standard deviation indicated to be more affected by the polymer concentration than by the air pressure. The results also indicated that lower surface tension and viscosity can reduce fiber thickness. All solvents showed to be feasible to produce PLA fibers by SBS and DMC can be used to produce PLA fibers with an affordable price using a greener process. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43379.     

Effect of a Self-Etching Adhesive System Containing a Novel Antimicrobial Polymer (QAMP) on Inhibiting Carious Lesions by Evaluating the Mechanical Properties of the Resin–Dentin Interface

The objective of this study was to assess the in vitro effect of a quaternary ammonium methacrylate polymer (QAMP) incorporated into a self-etching adhesive system on inhibiting caries by evaluating the mechanical properties of the adhesive interface. Twenty-four human third molars were distributed into: Clearfil? SE Bond containing 5% QAMP (experimental group), Clearfil? Protect Bond (positive control), and Clearfil? SE Bond (negative control). Teeth of each group were divided according to the method for producing artificial caries lesions: pH-cycling or microbiological assay. All samples were sectioned and polished in order to obtain hardness (H) and Young's modulus (E) values by nanoindentation test in the hybrid layer and dentin. Data were analyzed by ANOVA and Games Howell's post hoc test (α = 0.05). Regarding the hybrid layer, Clearfil? SE Bond containing QAMP demonstrated H and E values statistically higher than Clearfil? SE Bond in both pH-cycling and microbiological experiments. Considering dentin, Clearfil? SE Bond containing QAMP showed H and E values statistically higher than Clearfil? Protect Bond and Clearfil? SE Bond in the pH-cycling method and then Clearfil? SE Bond concerning the microbiological method. In general, Clearfil? SE Bond containing QAMP provided better mechanical properties for the resin–dentin interface after cariogenic challenges.