Non-Rigid Shape Comparison of Plane Curves in Images

A mathematical theory for establishing correspondences between curves and for non-rigid shape comparison is developed in this paper. The proposed correspondences, called bimorphisms, are more general than those obtained from one-to-one functions. Their topology is investigated in detail.A new criterion for non-rigid shape comparison using bimorphisms is also proposed. The criterion avoids many of the mathematical problems of previous approaches by comparing shapes non-rigidly from the bimorphism.Geometric invariants are calculated for curves whose shapes can be exactly matched with a bimorphism. The invariants are related to the concave and convex segments of a curve and provide justification for parsing the curve into such segments.     

Food safety and assurance: the role of information technology

The dairy industry is under pressure to improve product security, implement efficient risk management and rapid response capabilities, and manage quality 'from trough to table' to achieve full, verifiable traceability. In order to invest proactively in the future of the industry, individual processors must reassess their handling of quality and traceability data for strategic and competitive success, make appropriate physical configuration and operational adjustments, and deploy readily available technological tools to meet legislative and consumer demands, enhance product quality and increase operational efficiency and profits.     

Emergency planning and the Control of Major Accident Hazards (COMAH/Seveso II) Directive: an approach to determine the public safety zone for toxic cloud releases

The EU Control of Major Accidents Hazards Directive (Seveso II) requires an external emergency plan for each top tier site. This paper sets out a method to build the protection of public health into emergency planning for Seveso sites in the EU. The method involves the review of Seveso site details prescribed under the directive. The site safety report sets out the potential accident scenarios. The safety report's worst-case scenario, and chemical involved, is used as the basis for the external emergency plan. A decision was needed on the appropriate threshold value to use as the level of concern to protect public health. The definitions of the regulatory standards (air quality standards and occupational standards) in use were studied, how they are derived and for what purpose. The 10 min acute exposure guideline level (AEGL) for a chemical is recommended as the threshold value to inform decisions taken to protect public health from toxic cloud releases. The area delimited by AEGL 1 defines the population who may be concerned about being exposed. They need information based on comprehensive risk assessment. The area delimited by AEGL 2 defines the population for long-term surveillance when indicated and may include first responders. The area delimited by AEGL 3 defines the population who may present acutely to the medical services. It ensures that the emergency responders site themselves safely. A standard methodology facilitates discussions with plant operators and concerned public. Examples show how the methodology can be adapted to suit explosive risk and response to fire.     

Charge‐Carrier Density Independent Mobility in Amorphous Fluorene‐Triarylamine Copolymers

A charge‐carrier density dependent mobility has been predicted for amorphous, glassy energetically disordered semiconducting polymers, which would have considerable impact on their performance in devices. However, previous observations of a density dependent mobility are complicated by the polycrystalline materials studied. Here charge transport in field‐effect transistors and diodes of two amorphous, glassy fluorene‐triarylamine copolymers is investigated, and the results explored in terms of a charge‐carrier density dependent mobility model. The nondispersive nature of the time‐of‐flight (TOF) transients and analysis of dark injection transient results and transistor transfer characteristics indicate a charge‐carrier density independent mobility in both the low‐density diode and the high‐density transistor regimes. The mobility values for optimized transistors are in good agreement with the TOF values at the same field, and both have the same temperature dependency. The measured transistor mobility falls two to three orders of magnitude below that predicted from the charge‐carrier density dependent model, and does not follow the expected power‐law relationship. The experimental results for these two amorphous polymers are therefore consistent with a charge‐carrier density independent mobility, and this is discussed in terms of polaron‐dominated hopping and interchain correlated disorder.     

Correlating Emissive Non‐Geminate Charge Recombination with Photocurrent Generation Efficiency in Polymer/Perylene Diimide Organic Photovoltaic Blend Films

Evidence for a correlation between the dynamics of emissive non‐geminate charge recombination within organic photovoltaic (OPV) blend films and the photocurrent generation efficiency of the corresponding blend‐based solar cells is presented. Two model OPV systems that consist of binary blends of electron acceptor N′‐bis(1‐ethylpropyl)‐3,4,9,10‐perylene tetracarboxy diimide (PDI) with either poly(9,9‐dioctylfluorene‐co‐benzothiadiazole) (F8BT) or poly(9,9‐dioctylindenofluorene‐co‐benzothiadiazole) (PIF8BT) as electron donor are studied. For the F8BT:PDI and PIF8BT:PDI devices photocurrent generation efficiency is shown to be related to the PDI crystallinity. In contrast to the F8BT:PDI system, thermal annealing of the PIF8BT:PDI layer at 90 °C has a positive impact on the photocurrent generation efficiency and yields a corresponding increase in PL quenching. The devices of both blends have a strongly reduced photocurrent on higher temperature annealing at 120 °C. Delayed luminescence spectroscopy suggests that the improved efficiency of photocurrent generation for the 90 °C annealed PIF8BT:PDI layer is a result of optimized transport of the photogenerated charge‐carriers as well as of enhanced PL quenching due to the maintenance of optimized polymer/PDI interfaces. The studies propose that charge transport in the blend films can be indirectly monitored from the recombination dynamics of free carriers that cause the delayed luminescence. For the F8BT:PDI and PIF8BT:PDI blend films these dynamics are best described by a power‐law decay function and are found to be temperature dependent.     

Triplet Formation in Fullerene Multi‐Adduct Blends for Organic Solar Cells and Its Influence on Device Performance

In organic solar cells, high open circuit voltages may be obtained by choosing materials with a high offset between the donor highest occupied molecular orbital (HOMO) and acceptor lowest unoccupied molecular orbital (LUMO). However, increasing this energy offset can also lead to photophysical processes that compete with charge separation. In this paper the formation of triplet states is addressed in blends of polyfluorene polymers with a series of PCBM multi‐adducts. Specifically, it is demonstrated that the formation of such triplets occurs when the offset energy between donor ionization potential and acceptor electron affinity is ～1.6 eV or greater. Spectroscopic measurements support a mechanism of resonance energy transfer for triplet formation, influenced by the energy levels of the materials, but also demonstrate that the competition between processes at the donor–acceptor interface is strongly influenced by morphology.     

Feedstock analysis sensitivity for estimating ethanol production potential in switchgrass and energycane biomass

Efficient ethanol production from lignocellulosic biomass requires highly degradable feedstock; therefore, there is a similarity between forage crop production for ruminant animals and ethanol production from lignocellulosic biomass. Feed value analysis techniques may be used to estimate lignocellulosic biomass quality. Because lignin and its derivatives in cell walls are major compounds interrupting biomass degradation, fiber analysis and in vitro incubation tests were conducted with switchgrass (Panicum virgatum) and energycane (Saccharum spp.) biomass collected at 100 and 120 g lignin (acid detergent lignin) kg^?1 DM (dry matter). Mean NDF (neutral detergent fiber) in switchgrass was consistently greater than that of energy cane regardless of lignin levels, while ADF (acid detergent fiber) did not differ. Mean of energycane in vitro true digestibility and digestible neutral detergent fiber were greater than those of switchgrass. The ADF and ruminal fermentation rate averaged by lignin levels differed, while most of the analysis results did not. Based on ADF and NDF concentrations, switchgrass contained a greater concentration of hemicellulose than energycane, while cellulose concentration was similar. Fermentability of energycane was consistently greater than that of switchgrass. Fermentation gas volume was positively correlated with cellulosic biomass degradation for ethanol production. Consequently, fermentation gas kinetic parameters obtained from biomass fermentation with rumen fluid or with yeast indicate that the fermentable pool size is the parameter most closely correlated to ethanol production potential across the species. Results obtained from feed value analyses demonstrate fermentation variability and meaningful relationships between fermentation gas parameters and ethanol production. Thus, the ruminal fermentation process is useful as a screening tool for ethanol production potential of biofuel feedstock. Copyright © 2015 John Wiley & Sons, Ltd.     

Theory and data for simulating fine-scale human movement in an urban environment

Individual-based models of infectious disease transmission depend on accurate quantification of fine-scale patterns of human movement. Existing models of movement either pertain to overly coarse scales, simulate some aspects of movement but not others, or were designed specifically for populations in developed countries. Here, we propose a generalizable framework for simulating the locations that an individual visits, time allocation across those locations, and population-level variation therein. As a case study, we fit alternative models for each of five aspects of movement (number, distance from home and types of locations visited; frequency and duration of visits) to interview data from 157 residents of the city of Iquitos, Peru. Comparison of alternative models showed that location type and distance from home were significant determinants of the locations that individuals visited and how much time they spent there. We also found that for most locations, residents of two neighbourhoods displayed indistinguishable preferences for visiting locations at various distances, despite differing distributions of locations around those neighbourhoods. Finally, simulated patterns of time allocation matched the interview data in a number of ways, suggesting that our framework constitutes a sound basis for simulating fine-scale movement and for investigating factors that influence it.