省煤器管开裂原因分析

对省煤器开裂管进行了化学成分及宏、微观分析。分析结果表明，在高温高压条件下，在其焊缝溶合区出现粗大的魏氏组织，管材中的珠光体组织产生了不同程度的球化，而母材组织又存在严重的带状组织。在过热条件下熔合区极易出现裂纹，并由此快速扩展，造成省煤器管开裂。     

TSP203超前地质预报仪在隧道施工中的应用

大风垭口隧道地质及水文条件极其复杂,TSP203超前地质预报仪作为最先进的地质预报仪在大风垭口隧道施工中发挥了积极的作用。简单介绍TSP203超前地质预报仪的使用方法及其特点,根据TSP203预报结果与实际施工进行验证,体现其预报的精确性和长距离预报的优越性,建议今后类似工程中推广应用TSP203超前地质预报仪。     

一种新型特级防火卷帘的研究与开发——3J特级防火卷帘

介绍3J特级防火卷帘的各种重要功能特点,讨论其实用性与易用性以及推广该产品的必要性与可行性。     

缺血性糖尿病下肢病变的膝下动脉成形术

目的探讨膝下动脉的球囊成形术在治疗糖尿病缺血性下肢病变中的价值。方法对５３例糖尿病合并缺血性下肢病变患者６４侧缺血性下肢进行膝下动脉Deep球囊扩张成形术。对比患者手术前后临床症状的改变及足部溃疡的变化。结果５３例患者共１１９支动脉分支接受PTA治疗，５０例患者的１０１个分支成功地开通，技术成功率为８４．９％，所有５０例患者的临床症状均明显缓解，足部溃疡均变小，无需截肢。结论膝下动脉的球囊成形术是治疗缺血性糖尿病下肢病变安全有效的微创手段     

赋予针织服装个性魅力的女红工艺

将富于变化的女红工艺与单调的针织服装相结合，会使针织服装由平淡变为丰富，由呆板变为活泼。文章论述了在针织服装中运用女红图案、色彩、材料、针法的原理。     

Heat transfer of a row of three butane/air flame jets impinging on a flat plate

Experiments were performed to investigate the heat transfer characteristics of a row of three premixed, laminar, butane/air flame jets impinging on a water-cooled flat plate. The between-jet interference was found to reduce the heat transfer rate in the jet-to-jet interacting zone due to the depressed combustion. The interference became stronger when the jet-to-jet spacing and/or the nozzle-to-plate distance were/was small. The positive pressure existed in the between-jet interacting zone caused the asymmetric flame and heat transfer distribution of the side jet. The meeting point of the spreading wall jets of the central and the side jets did not occur at the midpoint of the neighboring jets, but at a location shifted slightly outwards. The maximum local heat flux and the maximum area-averaged heat flux occurred at a moderate nozzle-to-plate distance of 5d with a moderate jet-to-jet spacing of 5d. The lowest area-averaged heat flux was produced when both the jet-to-jet spacing and the nozzle-to-plate distance were small. Comparing with a single jet under the same experimental conditions, the heat transfer rates in both the stagnation point and the maximum heat transfer point were shown to be enhanced in a row of three-jet-impingement system. The present study provided detailed information on the heat transfer characteristics of a row of three in-line impinging flame jets, which had rarely been reported in previous study.     

An Inductively Coupled Lamb Wave Transducer

Wafer-type piezoelectric transducers are effective transducers for the excitation and detection of ultrasonic Lamb waves in plate-like structures. Such transducers are, however, vulnerable to corrosion and physical damage when mounted in exposed locations. In this paper we describe an inductively coupled Lamb wave transducer that eliminates the need for direct electrical connections. Signals are coupled into and out of the transducer using two probe coils. In this paper we explore the operation of inductively coupled transducers both analytically and experimentally. Finite-element analysis is used to determine inductances and the coupling constant, and electrical circuit analysis to determine the transfer function and its dependence on the gap between the probe coils and the transducer. Experiments show that return signals of millivolt amplitude are obtained when the transducer is excited with 10-V amplitude pulses. These transducers are suitable for permanent mounting on structures to be monitored for cracks or flaws     

在ad hoc网络中一种新的节能路由切换模型

提出了一种基于能量消耗的路由切换模型(ERHM),它在路由维护中利用切换技术来使路由的能量消耗最小.仿真结果表明采用切换技术的ERHM模型的能量节省量要比不采用切换技术节约1.5～7.5倍,且节点的移动性越大,能量节约越多.