Low temperature annealing behaviors of the titanium films formed by the ionized sputtering process on (001) silicon substrates

We investigated the low temperature reactions between the Ti films created by the ionized sputtering process and the (001) single crystal silicon wafers using high resolution transmission electron microscopy and x-ray diffractometry. We observed that the amorphous Ti-Si intermixed layer is formed at the Ti-Si interface whose thickness increased with the thickness of the deposited Ti films. The amorphous interlayer grew upon annealing treatments at the temperatures below 450°C. We also observed that the crystallization of the amorphous interlayer occurred upon annealing at 500°C. The first formed phase is Ti₅Si₃ in contact with Ti films, which is epitaxial with Ti films. Upon further annealing at 500°C, the Ti₅Si₄ phase and C49 TiSi₂ phase formed in the regions close to Ti films and Si substrates, respectively.     

Efficient traffic prediction scheme for real-time VBR MPEG videotransmission over high-speed networks

The efficient transportation of real-time variable bit rate (VBR) video traffic in high-speed networks is currently an active area of research. The capability to predict VBR video traffic can significantly improve the effectiveness of numerous management tasks, including dynamic bandwidth allocation and congestion control. This paper proposes an adaptive traffic prediction method for VBR MPEG videos, a major multimedia application. Rapid traffic variations due to scene changes are analyzed, then a prediction scheme using the identification of scene changes related to I and P frames is presented. For predicting multiplexed MPEG traffic, a prediction interval is derived that represents a highly correlated traffic sequence. In addition, to reduce the prediction error, a less fluctuating signal instead of the original multiplexed traffic is used as the input for the predictor. Simulation results show that the proposed method is able to predict the original traffic more accurately than the conventional LMS method     

CW operation and threshold characteristics of all-monolithic InAlGaAs 1.55-/spl mu/m VCSELs grown by MOCVD

We demonstrate an all-monolithic metal-organic chemical vapor epitaxy (MOCVD)-grown 1.55-/spl mu/m vertical-cavity surface-emitting laser operating continuous wave up to 35/spl deg/C. The structure is based on the InAlGaAs-InP material system grown by a single step of MOCVD. Wet oxidation of a strained In/sub 0.4/Al/sub 0.6/As layer is used for the current confinement. The threshold current, threshold voltage and the external quantum efficiency at room temperature are about 1.6 mA, 2.3 V, and 5.4%, respectively.     

Ultra‐small Form‐Factor Helix on Pad‐Type Stage‐Bypass WCDMA Tx Power Amplifier Using a Chip‐Stacking Technique and a Multilayer Substrate

A fully integrated small form‐factor HBT power amplifier (PA) was developed for UMTS Tx applications. For practical use, the PA was implemented with a well configured bottom dimension, and a CMOS control IC was added to enable/disable the HBT PA. By using helix‐on‐pad integrated passive device output matching, a chip‐stacking technique in the assembly of the CMOS IC, and embedding of the bulky inductive lines in a multilayer substrate, the module size was greatly reduced to 2 mm × 2.2 mm. A stage‐bypass technique was used to enhance the efficiency of the PA. The PA showed a low idle current of about 20 mA and a PAE of about15% at an output power of 16 dBm, while showing good linearity over the entire operating power range.     

Subjective Listening Experiments on a Front and Rear Array‐Based WFS System

Wave field synthesis (WFS) has been gathering more and more attention recently due to its ability to perfectly reproduce an original sound field. However, to realize theoretically perfect WFS, a four‐sided loudspeaker array that encloses the listener is required. However, it is difficult to build such a system except in large listening spaces, such as a theater or concert hall. In other words, if the listening space is a home, installing a side loudspeaker array is impractical. If the two side walls located to the left and right of the listener can be omitted, a setup using only front and rear loudspeaker arrays may be a solution. In this letter, we present a subjective listening experiment of sound localization/distance based on a WFS using a front and rear loudspeaker array system which is conducted on two listening points and shows average localization errors of 6.1° and 9.18°, while the average distance errors are –27% (0.5 m) and –29% (0.6 m), respectively.     

柔性有源OLED显示器制造几点技术方面的考虑

AMOLED在柔性显示领域前途似锦。LG显示展示了一款全彩4in柔性AMOLED样机,衬底为80μm厚的不锈钢薄片,曲率达到5cm弯曲半径。本文就此项柔性显示技术所面临的挑战进行了探讨．包括柔性衬底衬底的传送、如何获得特性稳定可靠的TFT以使OLED的亮度和一致性适用于此项技术的商业化推广。     

Performance improvement of TCP in ad hoc networks by mitigating channel contention

In ad hoc networks, the spatial reuse property limits the number of packets which can be spatially transmitted over a path. In standard Transmission Control Protocol (TCP), however, a TCP sender keeps transmitting packets without taking into account this property. This causes heavy contention for the wireless channel, resulting in the performance degradation of TCP flows. Hence, two techniques have been proposed independently in order to reduce the contention. First, a TCP sender utilizes a congestion window limit (CWL), by considering the spatial reuse property. This prevents the TCP sender from transmitting more than CWL number of packets at one time. Second, a delayed ack (DA) strategy is exploited in order to mitigate the contention between the TCP ACK and DATA packets. Recently, although TCP‐DAA (Dynamic Adaptive Acknowledgment) attempts to utilize a CWL‐based DA strategy, TCP‐DAA overlooks a dynamic correlation between these two techniques. This paper, therefore, reveals the dynamic correlation and also proposes a protocol which not only reduces the frequency of the TCP ACK transmissions but also determines a CWL value dynamically, according to network conditions. Simulation studies show that our protocol performs the best in various scenarios, as compared to TCP‐DAA and standard TCP (such as TCP‐NewReno). Copyright © 2009 John Wiley & Sons, Ltd.     

Room‐Temperature Metallic Fusion‐Induced Layer‐by‐Layer Assembly for Highly Flexible Electrode Applications

To fabricate flexible electrodes, conventional silver (Ag) nanomaterials have been deposited onto flexible substrates, but the formed electrodes display limited electrical conductivity due to residual bulky organic ligands, and thus postsintering processes are required to improve the electrical conductivity. Herein, an entirely different approach is introduced to produce highly flexible electrodes with bulk metal–like electrical conductivity: the room‐temperature metallic fusion of multilayered silver nanoparticles (NPs). Synthesized tetraoctylammonium thiosulfate (TOAS)‐stabilized Ag NPs are deposited onto flexible substrates by layer‐by‐layer assembly involving a perfect ligand‐exchange reaction between bulky TOAS ligands and small tris(2‐aminoethyl)amine linkers. The introduced small linkers substantially reduce the separation distance between neighboring Ag NPs. This shortened interparticle distance, combined with the low cohesive energy of Ag NPs, strongly induces metallic fusion between the close‐packed Ag NPs at room temperature without additional treatments, resulting in a high electrical conductivity of ≈1.60 × 10⁵ S cm^?1 (bulk Ag: ≈6.30 × 10⁵ S cm^?1). Furthermore, depositing the TOAS–Ag NPs onto cellulose papers through this approach can convert the insulating substrates into highly flexible and conductive papers that can be used as 3D current collectors for energy‐storage devices.     

Analysis of adjacent channel interference using distribution function for V2X communication systems in the 5.9‐GHz band for ITS

Many use cases have been presented on providing convenience and safety for vehicles employing wireless access in vehicular environments and long‐term evolution communication technologies. As the 70‐MHz bandwidth in the 5.9‐GHz band is allocated as an intelligent transportation system (ITS) service, there exists the issue that vehicular communication systems should not interfere with each other during their usage. Numerous studies have been conducted on adjacent interfering channels, but there is insufficient research on vehicular communication systems in the ITS band. In this paper, we analyze the interference channel performance between communication systems using distribution functions. Two types of scenarios comprising adjacent channel interference are defined. In each scenario, a combination of an aggressor and victim network is categorized into four test cases. The minimum requirements and conditions to meet a 10% packet error rate are analyzed in terms of outage probability, packet error rate, and throughput for different transmission rates. This paper presents an adjacent channel interference ratio and communication coverage to obtain a satisfactory performance.     

MIMO-HFM: A MIMO System with Hyperbolic Frequency Modulation for Underwater Acoustic Communication

Reliable transmission and high data rate over underwater acoustic channels are considerably challenging. In this paper, we propose Multiple-Input and Multiple-Output (MIMO) scheme using a Hyperbolic Frequency Modulation (HFM) waveform. Our proposed system combines the advantages of both systems-special multiplexing of MIMO and immunity against Doppler shift of HFM. To increase the spectral efficiency, we employ M-ray HFM and overlapped sub-channels by leveraging the high temporal resolution characteristic. To verify effectiveness of our system, we have designed a theoretically enhanced acoustic simulator, which especially focuses on the reflection phenomenon by utilizing approved reflection loss models. Based on our acoustic simulator, we could verify that our system is robust against for multipath fading and Doppler shifting while keeping the multiplexing benefit of MIMO, while maintaining a very low complexity and system overhead. In addition, the results provide a useful insight for physical layer design in acoustic communication systems.