The IEEE P1520 standards initiative for programmable networkinterfaces

This article discusses the need for standard software interfaces for programming of networks, specifically for service and signaling control, through programming interfaces. The objective is to enable the development of open signaling, control, and management applications as well as higher-level multimedia services on networks. The scope of this effort includes ATM switches, circuit switches, IP routers, and hybrid switches such as those that provide for fast switching of IP packets over an ATM backbone. The basic ideas represented herein are in the process of development as a standard for application programming interfaces for networks under IEEE Standards Project IEEE P1520     

Reversible energy recovery logic circuit without non-adiabaticenergy loss

The authors propose a reversible energy recovery logic (RERL) circuit for ultra-low-energy consumption, which consumes only adiabatic energy loss and leakage current loss by completely eliminating non-adiabatic energy loss. It is a dual-rail adiabatic circuit using the concept of reversible logic with a new eight-phase clocking scheme. Simulation results show that at low-speed operation, the RERL consumes much less energy than the complementary static CMOS circuit and other adiabatic logic circuits     

Analysis and characterization of traveling-wave electrode in electroabsorption modulator for radio-on-fiber application

Comparing with a lumped electroabsorption modulator (EAM), we show the merits of a long EAM with traveling-wave electrode with high radio-frequency (RF) gain that could be used in high-frequency analog application. By terminating the RF output port with the characteristic impedance of 30 /spl Omega/, the device exhibited a large enhancement of 6 dB above 10 GHz in the electrical-to-optical response and a wide fractional bandwidth as estimated from simulation. In addition, an input impedance matching circuit of stub embedded on the device chip was found to be very effective for improving RF characteristics in the narrow band of frequency.     

Channel Estimation in Long Term Evolution Uplink Using Minimum Mean Square Error-Support Vector Regression

In this paper, minimum mean square error-support vector regression (MMSE-SVR) is proposed, which is shown to be adequate for the estimation of the long term evolution (LTE) uplink channel with nonlinear features. MMSE-SVR was applied to estimate real channel environments such as the vehicular A channels defined by the International Telecommunication Union (ITU). The simulation results show that the proposed method has a better performance than the least squares support vector machine (LS-SVM) and the standard MMSE with linear and spline interpolation.     

Outstanding Low-Temperature Performance of Structure-Controlled Graphene Anode Based on Surface-Controlled Charge Storage Mechanism

The energy and power performance of lithium (Li)-ion batteries is significantly reduced at low-temperature conditions, which is mainly due to the slow diffusion of Li-ions in graphite anode. Here, it is demonstrated that the effective utilization of the surface-controlled charge storage mechanism through the transition from layered graphite to 3D crumpled graphene (CG) dramatically improves the Li-ion charge storage kinetics and structural stability at low-temperature conditions. The structure-controlled CG anode prepared via a one-step aerosol drying process shows a remarkable rate-capability by delivering ≈206 mAh g^–1 at a high current density of 10 A g^–1 at room temperature. At an extremely low temperature of −40 °C, CG anode still exhibits a high capacity of ≈154 mAh g^–1 at 0.01 A g^–1 with excellent rate-capability and cycling stability. A combination of electrochemical studies and density functional theory (DFT) reveals that the superior performance of CG anode stems from the dominant surface-controlled charge storage mechanism at various defect sites. This study establishes the effective utilization of the surface-controlled charge storage mechanism through structure-controlled graphene as a promising strategy to improve the charge storage kinetics and stability under low-temperature conditions.     

Transient Modeling and Analysis of Pulse-Width Modulated Z-Source Inverter

The newly proposed Z-Source inverter has been proven in the literature to exhibit both steady-state voltage buck and boost capabilities using a unique LC impedance network coupled between the power source and converter circuit. This paper now presents transient modeling and analysis of a voltage-type Z-source inverter. These aspects are found to be challenging and they need to be carefully investigated before attempting to design advanced control algorithms for controlling the Z-source inverter. Through detailed analysis, the paper identifies several phenomena on the dc and ac-sides of the inverter, which would result in the inverter having a non-minimum-phase transient response. The dc-side phenomenon is associated with the Z-source impedance network, which is shown through small-signal and signal-flow-graph analyses to be having a right-half-plane zero in its control-to-output transfer function. Also, the ac-side phenomenon is shown through space vector analysis to depend on the time intervals of inverter states used for reconstructing the desired inverter output voltage. Based on the ac vectorial analysis, a method for improving the inverter transient response is also presented. Last, simulation results obtained using a switching-functional model and experimental results obtained using a laboratory prototype are presented for validating the described theoretical concepts     

A single-chip storage LSI for home networks

Network direct attached storage (NDAS) is a network storage architecture that allows direct attachment of existing ATA/ATAPI devices to Ethernet without a separate server. Unlike other architectures such as NAS, SAN, and USB mass storage, no server computer intervenes between the storage and the client hosts. We describe an NDAS disk controller (NDC) amenable to low-cost single-chip implementation that processes a simplified L3/L4 protocol and converts commands between ATA/ATAPI and Ethernet, while the remaining complex tasks are performed by remote hosts. Unlike NAS architectures that use TCP/IP, NDAS uses a TCP-like lean protocol that lends itself well to high-performance hardware realization. Thanks to the simple NDAS architecture and protocol, an NDC implemented on a single 4 mm /spl times/ 4 mm chip in 0.18 /spl mu/m CMOS technology achieves a maximum throughput of 55 Mbytes/s on gigabit Ethernet, which is comparable to that of a high-performance disk locally attached to a host computer.     

Metamaterial-based electronically controlled transmission-line structure as a novel leaky-wave antenna with tunable radiation angle and beamwidth

A metamaterial-based electronically controlled transmission-line structure is presented and demonstrated as a novel leaky-wave (LW) antenna with tunable radiation angle and beamwidth functionalities. This structure is, in essence, a composite right/left-handed (CRLH) microstrip structure incorporating varactor diodes for fixed-frequency voltage-controlled operation. Angle scanning at a fixed frequency is achieved by modulating the capacitances of the structure by adjusting the (uniform) bias voltage applied to the varactors. Beamwidth tuning is obtained by making the structure nonuniform by application of a nonuniform bias voltage distribution of the varactors. A rigorous analysis based on an extension of the CRLH concept is proposed and the corresponding dispersion curves, obtained by equivalent-circuit formulas with LC parameters extracted from full-wave simulation, are shown. A 30-cell LW antenna structure, incorporating both series and shunt varactors for optimal impedance matching and maximal tuning range, is designed. This prototype exhibits continuous scanning capability from 50/spl deg/ to -49/spl deg/ by tuning the bias voltages from 0 to 21 V at 3.33 GHz. A maximum gain of 18 dBi at broadside is also achieved. In addition, it provides half-power beamwidth variation of up to 200% with comparison to the case of uniform biasing. The effect of intermodulation due to the nonlinearity of the varactors is shown to be negligible for antenna applications. The antenna is tested in a 10-Mb/s binary phase-shift keying transmission link and successful recovery of the baseband data is demonstrated.     

A novel phase noise reduction technique in oscillators usingdefected ground structure

A new technique to reduce the phase noise in microwave oscillators is developed using the resonant characteristic of the defected ground structure (DGS). Two kinds of oscillators have been designed and measured for the examination of the reduction of phase noise by the DGS. The first adopts the DGS section under the microstrip line at the gate circuit, while the second has only the conventional microstrip line. Measurement shows reduced phase noise by 10-15 dB in the oscillator with the DGS compared to the conventional one     

A compact-size microstrip spiral resonator and its application to microwave oscillator

This letter presents a compact size microstrip spiral resonator and its application to a low phase noise oscillator. This resonator has stopband characteristics to be used in the series feedback oscillator topology. The whole circuit area of the proposed resonator is within 1/10 wavelength, which results in the reduction of the circuit area and cost. A 10-GHz oscillator incorporated with this resonator was designed, fabricated and measured. It shows low phase noise performance of -95.4-dBc/Hz at 100 kHz offset.