Analysis of matrix damage evolution in laminated composite plates

A new model has been developed to investigate matrix cracking in laminated fibrous composite structures. The model can predict matrix cracking and its effect on stiffness reduction. It can also compute the load transfer from the cracked matrix to surrounding fibers. The model is based on the micromechanical concept of the fiber and matrix as well as the matrix material degradation concept as matrix cracking progressed. The micromechanical concept uses a rectangular cell geometry representing a fiber and its surrounding matrix while the material degradation concept uses an empirical expression of a Weibull type function. Two material constants are required for matrix cracking. The constants were obtained from an experiment on matrix cracking. With those constants, the present model predicts the matrix cracking in other cases. The predicted solutions were comparable to the experimental data.     

Strength of Al-Zn-Mg-Cu matrix composite reinforced with SiC particles

The AA7075 alloys reinforced with SiC and without SiC particles were fabricated by a pressureless infiltration method, and then, their tensile properties and microstructures were analyzed. The spontaneous infiltration of molten metal at 800 °C for 1 hour under a nitrogen atmosphere made it possible to fabricate 7075 Al matrix composite reinforced with SiC, as well as a control 7075 Al without SiC. A significant strengthening even in the control alloy occurred due to the formation of in-situ AlN particle even without an addition of SiC particles. Composite reinforced with SiC particles exhibited higher strength values than the control alloy in all aging conditions (underaged (UA), peak-aged (PA), and overaged (OA)), as well as a solution treated condition. Spontaneous infiltration was further prompted owing to the combined effect of both Mg and Zn. This may lead to an enhancement of wetting between the molten alloy and the reinforcement. Consequently, strength improvement in a composite may be attributed to good bond strength via enhancement of wetting. The grain size of the control alloy is greatly decreased to about 2.5 μm compared to 10 μm for the commercial alloy. In addition, the grain size in the composite is further decreased to about 2 μm. These grain refinements contributed to strengthening of the control alloy and the composite.     

Interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd0.96Zn0.04 Te (211)B substrates by molecular beam epitaxy

Double-crystal x-ray rocking curve (DCRC) and secondary-ion mass-spectroscopy (SIMS) measurements have been performed to investigate the effect of rapid thermal annealing on the interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd_0.96Zn_0.04Te (211)B substrates by molecular beam epitaxy. The sharp satellite peaks of the DCRC measurements on a 100-period HgTe/CdTe (100Å/100Å) superlattice show a periodic arrangement of the superlattice with high-quality interfaces. The negative direction of the entropy change obtained from the diffusion coefficients as a function of the reciprocal of the temperature after RTA indicates that the Hg diffusion for the annealed HgTe/CdTe superlattice is caused by an interstitial mechanism. The Cd and the Hg concentration profiles near the annealed HgTe/CdTe superlattice interfaces, as measured by SIMS, show a nonlinear behavior for Hg, originating from the interstitial diffusion mechanism of the Hg composition. These results indicate that a nonlinear interdiffusion behavior is dominant for HgTe/CdTe superlattices annealed at 190°C and that the rectangular shape of HgTe/CdTe superlattices may change to a parabolic shape because of the intermixing of Hg and Cd due to the thermal treatment.     

An outbreak of malignant catarrhal fever in young rusa deer (Cervus timorensis)

On the basis of clinical signs and histological findings eight 9-month-old male rusa deer (Cervus timorensis) were diagnosed with sheep associated-malignant catarrhal fever. Following a variable course involving rectal temperatures around 40.5 degrees C, depression, inappetence, diarrhoea, corneal opacity and hypopyon all animals died or were euthanased over a 5-week period. Severe multifocal vasculitis, mainly periglomerular and in the arcuate vessels were consistent histological findings which in the past have been adequate to confirm clinical diagnosis of sheep associated-malignant catarrhal fever. A nested polymerase chain reaction test has been used to detect a sheep associated-malignant catarrhal fever PRC product, 238 base-pairs in size, in DNA extracted from lymphocyte preparations. The result supported the diagnosis of sheep associated-malignant catarrhal fever in these deer.     

Homogeneity of fruits and vegetables comminuted in a vertical cutter mixer

The homogeneity of comminuted composites of 20 lb samples of apples, cabbage, and green beans containing field-incurred residues of p, p'-methoxychlor was studied to determine whether a 5 min comminution in a 40 qt vertical cutter mixer produces a homogeneous composite and whether the size of test portions used accurately represents the composite. Duplicate test portions of 100, 50, 25, 10, 5, and 2 g taken from each of 6 separate sections of the mixer were analyzed by standard pesticide residue methodology for p, p'-methoxychlor. Results of this study confirmed that comminution of fresh produce in a 40 qt vertical cutter mixer, according to instructions described in the U.S. Food and Drug Administration's Pesticide Analytical Manual, Volume I, Section 203B, produces a homogeneous composite. No significant differences were found in the data for the 3 crops taken from the 6 sections of the mixer. Test portion weights of 100, 50, and 25 g produced equivalent results for all 3 crops. Statistically significant differences were observed for cabbage at 2, 5, and 10 g and for green beans at 2 g.     

Improved performances of a S-SEED using extremely shallowquantum-wells and asymmetric Fabry-Perot cavity structure

The authors report significantly improved performances of a symmetric self-electrooptic-effect device (S-SEED), with high on-off contrast ratio (>30:l) and large optical bistability loop widths (ΔP=44%) at an applied bias of V_a=0 V, i.e., with no power supply. The S-SEED is made of extremely shallow quantum wells (ESQWs) in an asymmetric Fabry-Perot (AFP) cavity structure. At V_a =5 V ΔP increased by up to 95%, preserving the high contrast ratio. The reflectivity changes at V_a=0 and 5 V were about 15% and 30%, respectively. These are believed to be the largest values ever reported for such structures     

The rank one mixed μ problem and ‘kharitonov-type’ analysis

The general mixed μ problem has been shown to be NP hard, so that the exact solution of the general problem is computationally intractable, except for small problems. In this paper we consider not the general problem, but a particular special case of this problem, the rank one mixed μ problem. We show that for this case the mixed μ problem is equivalent to its upper bound (which is convex), and it can in fact be computed easily (and exactly). This special case is shown to be equivalent to the so-called ‘affine parameter variation’ problem (for a polynomial with perturbed coefficients) which has been examined in detail in the literature, and for which several celebrated ‘Kharitonov-type’ results have been proven.     

Acidogenic fermentation of blended food‐waste in combination with primary sludge for the production of volatile fatty acids

The performance of a laboratory‐scale anaerobic acidogenic fermenter fed with a mixture of blended kitchen food‐waste and primary sludge from a sewage treatment plant was investigated for the production of volatile fatty acids (VFA). The operating variables for acidogenic fermentation were kitchen food‐waste content (10 and 25 wt %), hydraulic retention time (HRT: 1, 3 and 5 days), temperature (ambient: 18 ± 2 °C, and mesophilic: 35 ± 2 °C) and pH (varied from 5.2 to 6.7). The experimental results indicated that effluent VFA concentrations and VFA production rates were higher at ambient temperature than at mesophilic conditions. The net amount of VFA with 10 wt % food‐waste increased up to 920 mg dm^?3 with an increase of HRT, but contrasting results (a decrease of 2610 mg dm^?3) were found due to the conversion of VFA into biogas in the case of 25 wt % food‐waste, which increased significantly at HRT of 3–5 days. In terms of biogas composition (CO₂ and CH₄), the organic matter was converted into CO₂ through the oxidative pathway by facultative species at low temperature while mesophilic temperature and optimum pH (6.3–7.8) played a pivotal role in increasing rate of conversion of VFA into biogas by methanogenesis. Rates of VFA production and their conversion are dependent on the food‐waste content in the mixture. Yet, the higher concentration of food‐waste (25% compared with 10%) did not produce VFA proportionally due to the increased rate of conversion of VFA into gaseous products. The maximum VFA production rate (0.318 g VFA_produced g^?1 VS_fed day^?1) was achieved in the 10 wt % food‐waste at ambient temperature and at a 5‐day HRT. Copyright © 2005 Society of Chemical Industry