Assembly of 8YSZ nanoparticles into gas-tight 1-2 μm thick 8YSZ electrolyte layers using wet coating methods

The application of a thin film electrolyte layer with a thickness in the micrometer range could greatly improve current solid oxide fuel cells (SOFCs) in terms of operating temperature and power output. Since the achievable minimal layer thickness with conventional powder coating methods is limited to ∼5 μm, a variety of thin film methods have been studied, but results on regular large-scale anode substrates are still lacking in the literature. In this paper, a wet coating process is presented for fabricating gas-tight 1-2 μm thick 8YSZ electrolyte layers on a regular NiO/8YSZ substrate, with a rough surface, a high porosity and a large pore size. These layers were deposited in a similar way as conventional suspension based layers, but the essential difference includes the use of coating liquids (nano-dispersion, sol) with a considerably smaller particle size (85 nm, 60 nm, 35 nm, 6 nm). Successful deposition of such layers was accomplished by means of an innovative coating process, which involves the preparation of a hybrid polyvinyl alcohol/8YSZ membrane by dip-coating or spin-coating and subsequently burning out the polymer part at 500 °C. Results from He leak tests confirmed that the sintered layers posses a very low number of defects and with values in the range 10⁻⁴-10⁻⁶ (hPa dm³)/(s cm²) the gas-tightness of the thin film layers is satisfactory for fuel cell operation. Moreover, preliminary results have also indicated a potential reduction of the sintering temperature from 1400 °C to the range 1200-1300 °C, using the presented coating process.     

Hollow superparamagnetic iron oxide nanoshells as a hydrophobic anticancer drug carrier: intracelluar pH-dependent drug release and enhanced cytotoxicity

With curcumin and doxorubicin (DOX) base as model drugs, intracellular delivery of hydrophobic anticancer drugs by hollow structured superparamagnetic iron oxide (SPIO) nanoshells (hydrodynamic diameter: 191.9 ± 2.6 nm) was studied in glioblastoma U-87 MG cells. SPIO nanoshell-based encapsulation provided a stable aqueous dispersion of the curcumin. After the SPIO nanoshells were internalized by U-87 MG cells, they localized at the acidic compartments of endosomes and lysosomes. In endosome/lysosome-mimicking buffers with a pH of 4.5-5.5, pH-dependent drug release was observed from curcumin or DOX loaded SPIO nanoshells (curcumin/SPIO or DOX/SPIO). Compared with the free drug, the intracellular curcumin content delivered via curcumin/SPIO was 30 fold higher. Increased intracellular drug content for DOX base delivered via DOX/SPIO was also confirmed, along with a fast intracellular DOX release that was attributed to its protonation in the acidic environment. DOX/SPIO enhanced caspase-3 activity by twofold compared with free DOX base. The concentration that induced 50% cytotoxic effect (CC(50)) was 0.05 ± 0.03 μg ml(-1) for DOX/SPIO, while it was 0.13 ± 0.02 μg ml(-1) for free DOX base. These results suggested SPIO nanoshells might be a promising intracellular carrier for hydrophobic anticancer drugs.     

Partially Bio-Based Polyester Bead Foams via Extrusion Foaming of Poly(butylene terephthalate)/Poly(butylene furanoate) Blends

The interest in bio-based alternatives to classical polyesters such as poly(ethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT) is steadily growing to achieve a more sustainable approach to polymer materials. In this study, PBT/poly(butylene furanoate) (PBF) blends are prepared, characterized and extrusion foamed. PBF as a bio-based polyester offers two advantages. The ecological footprint of the material is reduced, and additionally, it can be used in Diels-Alder reactions at the blend surface to support fusion of the foamed beads. The blending behavior of the polyesters is investigated using samples prepared in a microcompounder, particularly focused on the miscibility of the blends and transesterification reactions. The blends are thermodynamically immiscible but show a certain degree of transesterification according to nuclear magnetic resonance (NMR) spectroscopy. The morphology of blend beads produced by an extrusion foaming process is analyzed regarding their cell density, cell size distribution, and open-cell content. It is shown that PBF has a positive effect on the bead foam morphology. The use of a bifunctional linker designed for chemical fusion of the bead surfaces allows to obtaining of molded parts, in contrast to beads containing pure PBT.     

Electrospinning of polymer melts: Phenomenological observations

Melt electrospinning is an alternative to solution electrospinning, however, melt electrospinning has typically resulted in fibers with diameters of tens of microns. In this paper we demonstrate that polypropylene fibers can be reduced from 35 ± 8 μm in diameter, to 840 ± 190 nm with a viscosity-reducing additive. Melt electrospun blends of poly(ethylene glycol)-block-poly(?-caprolactone) (PEG₄₇-b-PCL₉₅) and poly(?-caprolactone) (PCL) produced fibers with micron-scale diameters (2.0 ± 0.3 μm); this was lowered to 270 ± 100 nm by using the gap method of alignment for collection. The collected melt electrospun fibers often fused together where they touched, allowing the stabilization of relatively thick non-woven felts. The melt electrospun collection also included coiled circles and looped patterns of fibers approximately 150-250 μm in diameter. The polymer jet was visible between the collector and spinneret for particularly significant lengths, and underwent coiling and buckling instabilities close to the collector. The focused deposition of melt electrospun fibers was maintained when multiple jets were observed, with the collections from multiple jets separated by 3.8 ± 0.5 mm for a 5 cm collector gap. The frequent fusion points between melt electrospun fibers, and a reduction in diameter for the gap method of alignment, indicated that the melt electrospun fibers are still slightly molten at collection.     

Application of combined EBSD and 3D‐SEM technique on crystallographic facet analysis of steel at low temperature

Electron backscatter diffraction has been increasingly used to identify the crystallographic planes and orientation of cleavage facets with respect to the rolling direction in fracture surfaces. The crystallographic indices of cleavage planes can be determined either directly from the fracture surface or indirectly from metallographic sections perpendicular to the plane of the fracture surface. A combination of electron backscatter diffraction and 3D scanning electron microscopy imaging technique has been modified to determine crystallographic facet orientations. The main purpose of this work has been to identify the macroscopic crystallographic orientations of cleavage facets in the fracture surfaces of weld heat affected zones in a well‐known steel fractured at low temperatures. The material used for the work was an American Petroleum Institute (API) X80 grade steel developed for applications at low temperatures, and typical heat affected zone microstructures were obtained by carrying out weld thermal simulation. The fracture toughness was measured at different temperatures (0°C, ?30°C, ?60°C and ?90°C) by using Crack Tip Opening Displacement testing. Fracture surfaces and changes in microstructure were analyzed by scanning electron microscopy and light microscopy. Crystallographic orientations were identified by electron backscatter diffraction, indirectly from a polished section perpendicular to the major fracture surface of the samples. Computer assisted 3D imaging was used to measure the angles between the cleavage facets and the adjacent polished surface, and then these angles were combined with electron backscatter diffraction measurements to determine the macroscopic crystallographic planes of the facets. The crystallographic indices of the macroscopic cleavage facet planes were identified to be {100}, {110}, {211} and {310} at all temperatures.     

The performance of the Danish simulation model DAISY in prediction of Nmin at spring

In Denmark the Danish Agricultural Advisory Centre has for some years used the soil content of mineral nitrogen in spring in fertilizer recommendations. Since 1986 these recommendations have been based on soil samples carried out at all intersections of a nationwide 7 km square grid in Denmark. It was hoped that it may be possible to replace soil measurements with values of soil mineral-N calculated with a model. The Danish simulation model DAISY, which among other things simulates changes in the inorganic N content of the soil, was evaluated with respect to the N_min content in the early spring under bare soil and under winter cereal. For both situations the precrop was cereals. The performance of the model was evaluated in farming systems receiving mineral fertilizer and in some instances organic manures. The results were analysed according to type of subsoil: sandy or loamy. Predictions were 11 kg N ha^–1 less than the measured values as a mean and the differences between simulated and measured values were high for fields receiving organic manures. Predictions were less than ± 10 kg N ha^–1 of measured values in 25–58% of cases for the different types of crop cover at the time of soil sampling, type of subsoils and fertilizer strategies, respectively. Predictions were less than ± 20 kg N ha^–1 of measured values in 48–89% of cases for the different situations. The best predictions were obtained for sandy subsoils covered by winter cereal and supplied with mineral fertilizer only. It is concluded that the quality of the data used as input in the model has to be increased and that further developments of parts of the DAISY model are needed before modelling can be a useful tool in N fertilizer recommendations.     

Phase behavior, nucleation and optical properties of the binary system isotactic polypropylene/N,N′,N″-tris-isopentyl-1,3,5-benzene-tricarboxamide

The phase behavior of the binary system consisting of isotactic polypropylene (i-PP) and N,N′,N″-tris-isopentyl-1,3,5-benzene-tricarboxamide (1)—a selected member of a class of novel, versatile ‘designer’ nucleating/clarifying agents—was investigated over the entire additive concentration range by means of differential scanning calorimetry (DSC) and optical microscopy. Experimental phase diagrams were constructed from data obtained in melting and crystallization studies, and a simple monotectic is advanced, very similar to the previously studied binary system i-PP/1,3:2,4-bis(3,4-dimethylbenzylidene) sorbitol (DMDBS). In contrast to the latter, the crystallization temperature in the present system i-PP/1 was found to increase to ∼120 °C already at the lowest additive concentration employed and remained constant at further increasing additive concentration. Liquid-liquid phase separation was observed at elevated temperatures for i-PP/1 mixtures comprising more than ∼2 wt% of 1. A study on the optical properties of the i-PP/1 system revealed that the values for haze and clarity of injection-molded plaques progressively decreased and increased, respectively, in the concentration range up to 0.15 wt%. An intermediate region of fairly concentration-independent optical properties was found between 0.15 and 1 wt%, followed by a rapid increase in haze at concentrations exceeding 2 wt%.     

Enantioselective Synthesis of α‐Hydroxy Ketones via Benzaldehyde Lyase‐Catalyzed C−C Bond Formation Reaction

(R)‐Benzoins and (R)‐2‐hydroxypropiophenone derivatives are formed on a preparative scale by benzaldehyde lyase (BAL)‐catalyzed C−C bond formation from aromatic aldehydes and acetaldehyde in aqueous buffer/DMSO solution with remarkable ease in high chemical yield and high optical purity. The substrate range of this thiamin diphosphate‐dependent enzyme was examined with respect to a broad applicability of this benzoin condensation‐type reaction in stereoselective synthesis.     

Catalyzed Reactions of Enol Ethers with SN1 Active Groups: A Novel Method for the Preparation of α‐Alkylated Ketones

The performance of tert‐alkylations, alkoxyalkylations, and aldehyde enolate allylations proceeding with low catalyst loading (0.1 mol %–5 mol %) is described. The reactions are complete within short times and can even be performed without solvent and under ambient conditions. The mechanism of the reaction was investigated by deuterium labeling and cross‐over studies.