Polypropylene (PP) based materials are widely used because of their low cost, good processability and good balance of properties but its low stiffness and strength greatly hinders its even wider utilization. In order to overcome this, PP is reinforced with different fillers. In composites; the issue of interface between the filler and matrix is of importance. Thus in the present paper, the effect of cryo-ageing and subsequent thermal-annealing on the PP-talc filled composites have been studied to monitor its effect on the interface. The composites with talc of different particle sizes are examined for mechanical and structural properties after treatment. The mechanical properties are evaluated by testing its tensile strength and wear performance, whereas, the study of structural properties by FTIR and SEM reveals some structural changes. These results have further been discussed and evaluated to find out the effect of these treatments on interface of various selected talc filled PP composite. 相似文献
In this study, the morphology and development of precipitate-free zones (PFZs) near grain boundaries (GBs) in low coefficient of thermal expansion (CTE) Ni-Mo-Cr-W alloys (based on Haynes 244) have been investigated as a function of thermal history and composition using electron microscopy techniques. It is shown that the formation of wide, continuous PFZs adjacent to GBs can be largely attributed to a vacancy depletion mechanism. It is proposed that variations in the vacancy distributions that develop after solution heat treatment (SHT) and subsequent quenching and aging greatly influence the development of the γ′-Ni2(Mo,Cr) precipitates during the aging process and result in the development of PFZs of varying sizes. The relatively large (5 to 10 μm) PFZs are distinct from the smaller, more common PFZs that result from solute depletion due to GB precipitation that are typically observed after prolonged aging. During the course of this investigation, heat treatment parameters, such as aging time, SHT temperature, cooling rate after SHT, and heating rate to the aging temperature—all of which change vacancy concentration and distribution adjacent to GBs—were investigated and observed to have significant influence on both the size and morphology of the observed PFZs. In contrast to results from other Ni-based alloys studied previously, PFZ development in the current alloys was observed across a broad range of aging temperatures. This appears to be due to the high misfit strain energy of the γ′ precipitates, resulting in a nucleation process that is sensitive to vacancy concentration. It is also shown that a slightly modified alloy with higher Mo concentrations develops smaller, more typical PFZs; this is presumably due to an increased driving force for γ′ precipitation which overshadows the influence of misfit strain energy, thereby decreasing the sensitivity of precipitation on vacancy concentration.